日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
SP-014-Series
Omega Link M12 モジュラースマートプローブ アナログプロセスインターフェース I/O付き
- 最大3回路の電流ループ(0-24mA)または
- 最大3回路のmV(0-1.0 Vdc)
- 2回路のデジタルI/O
- SYNC構成ソフトウェアによるソフトウェア設定可能
製品の概要
- 承認 CE、UKCA
- コンフィグレーション Omega Link Smart InterfaceおよびSYNC構成ソフトウェアで設定可能
- デジタル入力 VinHighThreshold = 2.2 VMAX、VinLowThreshold = 0.3 VMIN、VinMAX = 30 VDC
- デジタル出力 2x オープンドレイン 100 mA 最大、VMAX = 30 Vdc
- エンクロージャーの定格 IP67
- 入力制御信号 電流ループ:4〜20mA、電圧:0〜1.0Vdc、0〜2.0Vdc)
- 入力注 ON: 1.0 Vdc、OFF: 0.7 Vdc、内部プルアップ/ダウン: 1.5k~3.0 Vdc、コンパレータ(パルス)入力: 100 mV、500 mV、1.0 Vdc、2.0 Vdc
- 長さ 96.7 mm
- チャンネル数 3
- I/Oの数 2
- 動作温度(最高) 85 °C
- 動作温度(最低) -40 °C
- シリーズID SP-014-Series
- ソフトウェア OEG、SYNC、およびOMEGA Cloudと互換性あり
- 電源タイプ DC
- 供給電圧 2.8から3.3 Vdc
- 幅 22.1 mm
Supported Applications
The Omega SP-014 Series is a modular, smart sensing device designed to integrate process signals into the Omega Link Ecosystem. It functions as an analog process interface with I/O capabilities for data acquisition and monitoring tasks.
- Process signal integration via 3 independent inputs configurable as Current Loop (20 mA), Voltage (1.0 VDC or 2.0 VDC).
- Mixed-mode operation measuring one process input alongside a digital pulse input for rate, pulse width, duty cycle, or counting.
- Data and event logging supporting over 10,000 samples via SYNC software configuration.
Operating Conditions & Performance
The SP-014 Series operates within an ambient temperature range of -40 to 85°C (-40 to 185°F) and requires a power supply between 2.8 VDC and 3.3 VDC (excitation voltage: 3.3 VDC). The device achieves IP67 enclosure rating when mated.
Analog Input Performance
- Current Loop: Range 0 - 24 mA, Resolution ±0.1 mA, Accuracy ±0.2 mA (Input Impedance: 50 ohm).
- Voltage (Low): Range 0 - 1.0 VDC, Resolution ±10 mV, Max Input 1.20 VDC, Accuracy ±10 mV (Input Impedance: 100k ohm).
- Voltage (High): Range 0 - 2.0 VDC, Resolution ±10 mV, Max Input 2.50 VDC, Accuracy ±20 mV (Input Impedance: 100k ohm).
Digital Input Performance
- Frequency (Rate): Range 0.01 Hz to 100 Hz with T_PW MIN = 200 uS, Accuracy ±0.5%.
- Frequency (High Rate): Range 100 to 1000 Hz with T_PW MIN = 200 uS, Accuracy ±1 Hz averaged over 1 sec.
- Counter: Range 0 to +8388608 at 1 kHz Max Rate, Accuracy ±1 Count Max.
- Pulse Width (T_PW): Min 200 uS, Accuracy ±50 uS ±1%.
- Duty Cycle: Range 1% to 99%, Operating Conditions 0.01 Hz to 1000 Hz with T_PW MIN = 200 uS, Accuracy ±1.5% Max.
Discrete I/O
- Digital Outputs: 2x Open Drain, 100 mA max.
- Digital Inputs: V_inHighThreshold = 2.2 V_MAX, V_inLowThreshold = 0.3 V_MIN, V_inMAX = 30 VDC.
Configuration Options
The series utilizes a modular M12 construction with specific connector configurations for process and I/O access. The overall dimensions are 22.1 mm W x 96.7 mm L (0.87" x 3.80") not including mounting tabs.
Connectors
- M12 5-Pin Female Connector: Supports Process Mode or Mixed Mode wiring configurations for Excitation Power, Ground Reference, and up to two process inputs (Process 0/1) or digital pulse/reset signals.
- M12 8-Pin Male Connector: Provides access to Discrete I/O Signals (DIO 0, DIO 1), Interrupt Signal (INTR), I2C Clock/Data (SCL/SDA), Shield Ground, and Power Supply (3.3VDD/GND).
Configuration & Ecosystem
The probe is software-configurable via SYNC software to enable integrated alarm and control functions with secure authentication. It supports deployment in wired or wireless configurations using Omega Link Smart Interfaces and Gateways.
- Smart Interfaces: Wired USB (IF-001), Wired RS485/Modbus (IF-002), Wireless Sub GHz 915 MHz (IF-006-1-NA) or 868 MHz (IF-006-1-EU).
- Gateways: Includes Wired IIoT Gateway Standard, Wireless IIoT Gateways (Standard/Pro/LTE variants), supporting Ethernet connectivity and Modbus protocols.
Accessories
The series supports various field-install connectors and cables:
- M12.5-S-M-FM: M12 5-pin Straight Plug Field install connector with screw terminals.
- M12.8-T-SPLIT: Smart Probe M12-8 pin shielded T-Splitter enabling access to I/O pins.
- Cables: Dual M12-8 connectors available in lengths of 1m (3.3'), 3m (9.8'), and 5m (16.4') with straight or right angle terminators.
Key Product Differences
The primary enumerated model is SP-014-1, described as the Omega Link Process Monitoring Smart Probe with discrete I/O. The series supports mixed-mode operation where Pin 2 and Pin 5 of the M12 5-Pin Female Connector function differently depending on configuration: in Mixed Mode, they serve as DIN 0/Pulse A and DIN 1/Reset respectively.
- Model SP-014-1 is the standard offering for this series code.
The device holds CE and UKCA approvals. The document does not specify wetted materials, sheath material, housing material, pressure rating, burst pressure, vibration or shock ratings, humidity rating, or media compatibility.
ソフトウェアとドライバー