日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LVCN414-Series
小型タンク用途向け非接触超音波レベルコントローラ
在庫のあるモデル
- 연속 및 스위칭 애플리케이션을 위한 신뢰할 수 있는 비접촉식 대체품
- 소형 탱크 애플리케이션에 최적화된 컴팩트 센서
- 펌프 및 알람용 제어/스위치 기능
- 부식성 액체 매체용 PVDF 트랜스듀서
製品の概要
- 정확도 ± 0.125인치
- 빔 폭 2인치
- 케이블 길이 48 in
- 구성 USB/PC Windows® 통해
- 직경 2 in
- 외함 등급 NEMA 6 ~ 30P 240V
- 높이 3.2 in
- 단열 PVC
- 루프 저항 400 Ω 최대
- 재료 폴리카보네이트, ABS, PVDF, FKM, TPV
- 최대 측정 범위 49.2 in
- 최소 측정 범위 0 in
- 미디어 호환성 정제 공정 / 냉각수, 부식성 화학물질 / 산성 / 염기, 유압유, 오일 / 윤활제, 유기 용매
- 메모리 비휘발성
- 와이어 수 2
- 최대 작동 압력 30 psi
- 작동 온도, 최대 60 °C
- 최소 작동 온도 -35 °C
- 출력 신호 현재
- 프로세스 연결 크기 1인치
- 프로세스 연결 유형 NPT 수나사
- 해상도 0.019"
- 시리즈 ID LVCN414-Series
- 온도 보상 자동 오버 레인지
Supported Applications
The Omega LVCN414 Series is a non-contact ultrasonic level controller and transmitter designed for small tank applications. It serves as an alternative to float, conductance, and pressure sensors in scenarios involving dirty, sticking, or scaling media where contact-based measurement may fail. The series supports general-purpose fluid handling in skid, machine, tool, and process applications.
Documented application contexts include:
- Small tanks up to 49.2" (1.25m) tall
- Medium tanks up to 18.0' (5.5m) tall when utilizing the broader LVCN family capabilities referenced in supporting documentation
- Corrosive liquid media applications, subject to chemical compatibility verification of Polycarbonate and PVDF materials
The sensor is classified as general purpose and should not be used in classified hazardous environments.
Operating Conditions & Performance
Performance specifications for the LVCN414 Series are defined by measurement range, accuracy, resolution, and environmental limits. The series offers a measurement range of 49.2" (1.25m) with an accuracy of 0.125" (3mm) and a resolution of 0.019" (0.5mm). A dead band of 2" (5cm) is specified for the LVCN414 variants.
Operating conditions are constrained by temperature, pressure, and enclosure ratings:
- Ambient Temperature: -31° to 140°F (-35° to 60°C)
- Process Temperature: 20° to 140°F (-7° to 60°C) with automatic temperature compensation
- Pressure Rating: Maximum Working Pressure (MWP) of 30 PSI
- Enclosure Rating: NEMA 6P (IP68), Type 6P encapsulated for corrosion resistance and submersible operation
- Beam Width: 2" (5cm) diameter
The device consumes 0.5 W of power.
Voltage, Output, and Electrical Specifications
- LVCN414-I / LVCN414: Powered by 24 VDC (loop), outputting a 4-20 mA two-wire signal. Maximum loop resistance is 400 Ohms.
- LVCN414-R: Requires 12-24 VAC/VDC power supply and includes four SPST relays rated at 60 VA, 1A maximum.
- LVCN414-V: Powered by 12-28 VDC. Outputs include 0-5Vdc, 0-10Vdc, or 976 to 2000 Hz frequency signals (sink current nominal 15 mA).
- Hysteresis: Selectable for LVCN414 / LVCN210 / LVCN318 / LVCN414-R models.
Configuration Options
The series is configurable across output types, relay integration, and connection interfaces. Models are available with or without an integrated USB connector for configuration via PC Windows® software (downloadable from omega.com/ftp). Non-volatile memory retains settings.
- Output Configurations: 4-20 mA two-wire loop-powered, voltage/frequency outputs, and relay switching options.
- Relay Options: Models LVCN414 and LVCN414-R include four SPST relays with selectable fail-safe states (Power loss: Hold last; Power on: Open, close, or hold last).
- Analog Fail-Safe: Configurable to 4 mA, 20 mA, 21 mA, 22 mA, or hold last for current outputs. Voltage/frequency models support Full, empty, or hold last.
Mechanical construction features a Polycarbonate (PC) and PC/ABS FR housing with a Polyvinylidene Fluoride (PVDF) transducer material. The cable is 9-conductor shielded with a PVC jacket (series specific) or Polyurethane (family manual), measuring 48" (1.2 m) in length. Process connections are provided via 1" NPT threads, utilizing an FKM mounting gasket.
Model Number Guide and Ordering
The series includes the following primary variants:
- LVCN414 / LVCN414-B: Level transmitter with 4-20 mA output, four relays, and USB connector (or requires separate LVCN414-USB).
- LVCN414-I / LVCN414-I-B: Level transmitter with 4-20 mA output only.
- LVCN414-R / LVCN414-R-B: Level switch configuration with four relays and no analog current output.
- LVCN414-V / LVCN414-V-B: Voltage or frequency output transmitter (0-5V, 0-10V, 976-2000Hz).
Note: Models with the "-B" suffix require the separate LVCN414-USB accessory for configuration. An optional mounting reducer (LVM31) is available to adapt from 1" female NPT to 2" male NPT.
Key Product Differences
The primary distinction within the LVCN414 Series lies in signal output and switching capabilities. The base model number indicates the presence of relays, analog current loops, or voltage/frequency signals:
- LVCN414 (with -B option): Combines 4-20 mA transmission with four SPST relay outputs.
- LVCN414-I (with -B option): Provides only the 4-20 mA analog output without relays.
- LVCN414-R (with -B option): Functions as a level switch with four SPST relays, lacking an analog current loop output.
- LVCN414-V (with -B option): Offers voltage or frequency outputs instead of the standard 4-20 mA signal.
All variants share identical measurement ranges (up to 49.2" / 1.25m), accuracy, and physical dimensions for the LVCN414 family. The "-B" suffix denotes models that do not include an integrated USB connector on the device body; these require the external LVCN414-USB accessory for software configuration.
PDFとマニュアル
ソフトウェアとドライバー