検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SCE-SSLP

NEMA4x 304 SS 電気エンクロージャー、屋外用、ホースダウン対応

  • 304または316Lステンレススチール製
  • 穴やノックアウトなし、連続溶接シームは滑らかに研磨済み
  • ドア開口部の全周にフランジトラフカラー付き
  • 耐油性ドアガスケット
SCE-SSLP
販売元 ¥ 254,708
NEMA4x 304 SS 電気エンクロージャー、屋外用、ホースダウン対応 SCE-SSLP SCE-SSLP
loading all models
製品の概要
  • クロージャータイプ 連続ヒンジ
  • 仕上げ #4 ブラッシュド仕上げ
  • シリーズID SCE-SSLP

Supported Applications

The Omega SCE-SSLP series consists of NEMA Type 4X single-door electrical enclosures constructed from 304 stainless steel. These units are designed to house electrical and electronic controls, instruments, and components in areas that may be regularly hosed down or exposed to very wet conditions. The enclosure provides protection against dust, dirt, oil, and water ingress.

For outdoor applications, a drip shield is recommended alongside the SCE-SSLP series installation.

Operating Conditions & Performance

The housing material for the entire series is 0.075" 304 Stainless Steel. The enclosures meet multiple protection standards:

  • NEMA Type 4, 4X, 12 & 13
  • UL Listed Type 4, 4X & 12
  • CSA Type 4, 4X & 12
  • IEC 60529 IP 66

The series offers a broad range of internal dimensions to accommodate various component layouts. Overall external dimensions span from 16.00 to 60.00 inches in height, 12.00 to 36.00 inches in width, and 6.00 to 16.00 inches in depth.

Specific dimensional notes include:

  • Dimensions are measured from the inside of the door.
  • The SCE-16H1206SSLP model is shown smaller than actual size in documentation illustrations.

Structural Requirements by Size

Enclosures greater than 610 (24) inches in height require a third clamp centered vertically on the door. Sub-panel sizing adjustments are noted as C + 8.1 (.32) for flat sub-panels and C - 4.5 (.18) for bent sub-panels.

Configuration Options

The SCE-SSLP series is available in numerous configurations defined by the model number format: SCE-<HEIGHT>H<WIDTH><DEPTH>6SSLP. The "P" suffix variants listed in specification tables (e.g., SCE-16P12) represent panel dimensions distinct from the enclosure body.

Available options and accessories for this series include:

  • Hasp and Staple For Padlocking
  • Print Pocket
  • Ground Stud On Door
  • Stainless Steel Clamps On Three Sides of Door
  • Panel Can Be Special Ordered in Stainless Steel Up to 48P36 Size

Key Product Differences

Variants within the SCE-SSLP series differ primarily by internal height, width, and depth dimensions. The model number explicitly encodes these physical parameters.

  • SCE-16H...: 16-inch height variants with widths ranging from 12 to 20 inches and depths of 6 or 8 inches.
  • SCE-20H... through SCE-30H...: Heights increase in increments, offering internal widths up to 30 inches and depths up to 16 inches depending on the specific model code (e.g., SCE-30H2416SSLP).
  • SCE-36H... through SCE-60H...: Larger enclosures with heights from 36.00 to 60.00 inches, widths up to 36.00 inches, and depths ranging from 8.00 to 16.00 inches.

Specific model examples include SCE-24H2412SSLP (24" H x 24" W x 12" D) and the largest listed variant, SCE-60H3612SSLP (60.00" H x 36.00" W x 12.00" D).

ja-JP
ja_JP
設定を保存する