검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Model-9671

다기능 베인 열풍속계: 공기 속도, 온도, 습도, BTU

多機能ベーン熱風速計:風速、温度、湿度、BTU
Model-9671
시작 ¥ 69,766
多機能ベーン熱風速計:風速、温度、湿度、BTU Model-9671 Model-9671
loading all models
제품 개요
  • 追加機能 1 ハードキャリングケース
  • 対気速度の精度 ± 5%
  • 対気速度精度の注記 読み値の±5%または最も大きい有効数字のいずれか大きい方
  • 空気速度、ミン 118 FPM
  • 空気速度分解能 0.1フィート/分
  • 空気速度応答時間 1秒
  • 風量 0~99999 CFM
  • 空気量精度 ± 5%
  • 空気体積精度の注記 読み値または最も有効な桁の±5%(大きい方)
  • 空気体積分解能 0.1 または 1
  • 空気体積応答時間 1秒
  • バッテリー寿命 100時間
  • バッテリーのサイズと種類 アルカリAA
  • ボーレート 9600
  • 表示単位 °C, °F, ft/min, km/h, ノット, m/s, mph
  • 表示サイズ 46 mm (1.8 インチ)
  • 表示タイプ LCD
  • プロセス温度(最高) 140 °F
  • プロセス温度(最低) -4 °F
  • 相対湿度 0~100%
  • 相対湿度精度 ± 3% RH
  • 相対湿度精度の注記 ±3% @ 25°C、湿度10~90%の範囲内。それ以外の範囲:±5%
  • 相対湿度分解能 0.001
  • 相対湿度応答時間 60秒
  • シリーズID Model-9671
  • 電源注記 (4) AAA アルカリ電池、付属、ユーザー交換可能
  • 電源タイプ バッテリー
  • 温度精度 ±1°F
  • 温度分解能 0.1°C、0.1°F
  • 温度応答時間 60秒
  • ベーン直径 3 インチ
  • 重量 6 oz
  • 湿球解決 0.1°F/°C
  • 湿球温度、最大値 158 °F
  • 湿球温度、最低 -7.6 °F

Supported Applications

The Dwyer Model 9671 Multifunction Vane Thermo-Anemometer is a handheld datalogger designed for air flow measurement. The series measures velocity, humidity, temperature, wet bulb, and air volume parameters to support HVAC testing and airflow analysis.

Operating Conditions & Performance

The Model 9671 operates across specific ranges with defined accuracy and response times:

  • Air Velocity: Range of 118 to 6299 ft/min (0.6 to 32 m/s) with an accuracy of ±5% of reading or last significant digit (whichever is greater). Resolution is 0.1 ft/min (0.1 m/s), and response time is 1 second.
  • Air Volume: Range of 0 to 99999 CFM or m³/s with an accuracy of ±5% of reading or last significant digit (whichever is greater). Resolution varies by range: 0.1 for values 0 to 9999.9, and 1 for values 10000 to 99999. Response time is 1 second.
  • Temperature: Range of -4 to 140°F (-20 to 60°C) with an accuracy of ±1°F (±0.6°C). Resolution is 0.1°F/°C, and response time is 60 seconds.
  • Relative Humidity: Range of 0 to 100% with an accuracy of ±3% @ 25°C from 10 to 90% RH; ±5% outside this range. Resolution is 0.10%, and response time is 60 seconds.
  • Wet Bulb: Range of -7.6 to 158°F (-22 to 70°C) with a resolution of 0.1°F/°C.

The device features a vane diameter of 3" (77 mm), weighs 6 oz (170 g), and includes CE approval. Power is supplied by four AAA alkaline batteries, providing approximately 100 hours of battery life.

Configuration Options

The Model 9671 series supports multiple measurement modes to accommodate different data collection needs:

  • Single Point Measurement: Captures a single reading with no memory storage.
  • Multiple Point Measurement: Allows for editable file names and stores up to 99 points. Users measure and store by pressing specified keys.
  • Automatic Logging (Datalogging): Supports programmable datalogging with a capacity of 2400 memory points. Files are named with the default date and time. The system automatically measures and stores data according to pre-set parameters, including Begin-Date, Start-Time, End-Date, Suspend-time, and sample rate.

Communication is handled via an RS-232 interface (9600 bps, 8 data bits, no parity) using a PS/2 PLUG connector. The unit includes a display measuring 1 x 1.8" (26 x 45 mm). Accessories available for the series include replacement probes: A-551 (Replacement Probe with Vane) and A-VT300-P (Replacement Probe with Miniature Vane).

Key Product Differences

The Model 9671 is offered as a complete kit including the meter, hard carrying case, batteries, software CD, RS-232 cable, and instruction manual. The series supports interchangeable probes to adapt to different measurement scenarios: the standard vane probe (A-551) or the miniature vane probe (A-VT300-P). While BTU calculation is listed as a function in the product overview, specific technical specifications such as range, accuracy, and resolution for BTU are not provided in the documentation.

ko-KR
ja_JP
설정 저장