검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

PHH-7000-Series

多変数水質テスター

다변수 수질 측정기
  • 高速かつ正確な測定のためのマイクロプロセッサ搭載
  • 特別な視野角
  • IP67等級、防水ハウジング
  • 大型LCD—pH、導電率、温度を同時表示
PHH-7000-Series
시작 ¥ 34,299
다변수 수질 측정기 PHH-7000-Series PHH-7000-Series
loading all models
제품 개요
  • 디스플레이 유형 LCD
  • 메모리 카드 해당 없음
  • 작동 온도, 최대 90 °C
  • 최소 작동 온도 0 °C
  • 염분 산맥 해당 없음
  • 시리즈 ID PHH-7000-Series
  • 공급 전력 참고 4 x "AAA" 배터리/UM 배터리
  • 온도 정확도 ± 0.3 °C (0.54°F)
  • 온도 해상도 0.1 °C (0.2 °F)

Supported Applications

The PHH-7000-Series is a family of OMEGAETTE microprocessor-based, waterproof handheld water-quality testers for fast, accurate field measurement of water chemistry. The pocket-style instruments are designed for on-site checks where portability and quick, one-hand operation matter.

Depending on the model, the series measures:

  • pH and mV/ORP for acidity, alkalinity, and oxidation-reduction potential.
  • Conductivity, TDS (total dissolved solids), and salt content.
  • Temperature, with automatic temperature compensation applied to the readings.

These capabilities suit drinking-water, aquaculture, environmental, pool and spa, and general laboratory and process water testing. User-replaceable sensors and one-key calibration keep the instruments serviceable in routine field use.

Operating Conditions & Performance

Measurement ranges span pH from -2 to 16 and mV readings up to 1000 mV, with temperature covered from 0 to 90 °C (32 to 194 °F). Conductivity is measured from 0 to 1999 µS and 0.01 to 19.99 mS, with TDS and salt each reported from 0 to 999 ppm and 1.00 to 9.99 ppt.

Accuracy and resolution highlights include:

  • pH: accuracy of ±0.01 + 1 digit at a resolution of 0.01 pH.
  • mV: accuracy of ±2 + 1 digit at a resolution of 1 mV.
  • Temperature: accuracy of ±0.3 °C (0.54 °F) at a resolution of 0.1 °C (0.2 °F).
  • Conductivity, TDS, and salt: accuracy of ±2% FS.

Automatic temperature compensation operates from 0 to 90 °C, and pH calibration uses standard pH 4.00, 7.00, and 10.01 buffers. Convenience features include a large LCD, data hold, min/max, a low-battery indicator, and auto power-off after 10 minutes of non-use.

The housing is IP67 rated and waterproof. The meter measures 195 x 40 x 36 mm and each unit runs on four 1.5 Vdc AAA/UM-4 batteries. The instruments are CE marked and carry a one-year warranty.

Configuration Options

The series comprises three models that differ in which parameters they measure and in the sensor they accept:

  • PHH-7011 is a pH pocket tester, measuring pH, mV, and temperature with a replaceable pH electrode.
  • CDH-7021 is a conductivity pocket tester, focused on conductivity, TDS, and salt measurement with a replaceable conductivity sensor.
  • PHH-7200 is a combined pH and conductivity tester that automatically recognizes which sensor is installed, so a single meter can perform either pH or conductivity measurement.

All three use replaceable sensors and come in a carrying case with the buffer or standard solutions required for calibration, making sensor swaps and recalibration straightforward in the field.

Key Product Differences

The series is ordered as three model numbers:

  • PHH-7011 — pH pocket tester.
  • CDH-7021 — conductivity pocket tester.
  • PHH-7200 — pH and conductivity tester.

Replacement and optional items include the PHE-7011 replacement pH electrode, the CDE-7021 replacement conductivity sensor, the ORE-7011 optional ORP electrode, PHA-4, PHA-7, and PHA-10 buffer solutions, CDSA-1413 conductivity solution, and MN2400 replacement AAA batteries.

액세서리

consumables

1413 µmho/cm conductivity solution, 1 quart
¥9,665 / 各
0 재고 있음
10.00 pH buffer solution 500 mL (1 pint) bottle
¥4,026 / 各
0 재고 있음
7.00 pH buffer solution 500 mL (1 pint) bottle
¥3,811 / 各
48 재고 있음
4.00 pH 완충 용액 500 mL (1 파인트) 병.
30,896원 / 개당
71 재고 있음
ja-JP
ja_JP
설정 저장