한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
AM-2250TX-Transmitter
멀티 변수 pH, ORP, 전도도 및 유량 루프 전원 트랜스미터
재고가 있는 모델
- pH, ORP, 전도도 및 유량 파라미터 지원
- 높은 가시성의 대형 LCD 디스플레이
- 유연하고 쉬운 교정, 산 및 염기에 대한 다점 전도도 교정 포함
- 범위 스케일링 및 PID 제어가 가능한 4-20mA 프로세스 출력
제품 개요
- 추가 기능 1 pH、ORP、導電率、流量。壁面またはパネル取り付け
- 응용 분야 ボイラー, 化学物質, 冷却塔, 飲食, 排ガス洗浄装置, 産業および製造業, 鉱業, パルプ&ペーパー, 廃棄物管理
- 승인 ETL(米国およびカナダ)およびCE申請中
- 보정 사양 참고 pH 교정 모드: 자동 또는 수동 2점 또는 3점; 용존 산소 교정 모드: 100% 포화 제로 오프셋; ORP 교정 모드: 수동 1점; 전도도 교정 모드: 최대 16점 제로 오프셋
- 전도도 측정 0.055 ~ 500,000 μS/cm
- 전기 출력 4 ~ 20 mA
- 외함 등급 NEMA 타입 4X
- 유량 표시 사양 참고 0에서 999까지 모든 단위
- 표지 높이 5.5 in
- 앞표지 폭 5.5 in
- 높이 5.4 in
- 입력 범위 사양 참고 pH 센서 입력: -600에서 +600 mV; ORP 센서 입력: -999에서 +999 mV; 전도도 센서 입력: 0에서 9999 Ω; 유량 센서 입력: 0에서 2000 Hz
- 길이 5 in
- 하중 저항 800 Ω
- 측정 유형 전도도, pH, ORP, 유량
- 장착 벽면 장착, 키트 제공 패널 장착. DIN 레일 및 파이프 장착은 옵션 키트 사용
- 작동 온도, 최대 70 °C
- 최소 작동 온도 -20 °C
- ORP 측정 범위 -1000 ~ +1000 mV
- 출력 세부 정보 1개의 4-20 mA 출력 PID(프로세스)와 함께 확장 가능한 4-20 mA, 광학적으로 절연됨.
- pH 측정 범위 0 ~ 14 pH
- 전력 소비 20 mA @ 24 Vdc
- 상대 습도 0~90% 상대 습도, 비응축
- 센서 사양 참고 사항 pH 센서 6선식 차동 또는 조합 ORP 센서 6선식 차동 또는 조합 전도도 센서 4선식 접촉식 : 셀 상수 0.01에서 100 사이 유량 센서 펄스 출력: 패들휠 pH 온도 요소 Magmete 100, 1000 Ω, RTD 300, 3000 Ω NTC ORP 온도 요소 100, 1000 Ω, RTD 300, 3000 Ω NTC 전도도 온도 요소 100, 1000 Ω, RTD 300, 3000 Ω NTC
- 시리즈 ID AM-2250TX-Transmitter
- 온도 보상 pH : 자동; ORP : 온도 표시; 전도도: 자동 또는 수동 -20~120 °C; 유량: 유량 누계기 표시
- 온도 범위 pH 범위: -20 ~ 120 °C; ORP 범위: -20 ~ 120 °C; 전도도 범위: -20 ~ 120 °C
- 무게 2 lb
- 폭 5.4 in
Supported Applications
The Omega AM-2250TX is a loop-powered, multi-parameter transmitter designed for industrial and municipal water quality monitoring. It measures pH, ORP (Oxidation Reduction Potential), Conductivity, and Flow parameters using compatible AquaMetrix sensors.
- pH measurement with 6-wire differential or combination sensor inputs
- ORP measurement supporting -999 to +999 mV ranges
- Contacting conductivity measurements from 0.055 to 500,000 µS/cm (depending on cell constant)
- Pulse output flow monitoring via paddle-wheel or magnetic flow meters
Operating Conditions & Performance
The AM-2250TX operates within an ambient temperature range of -20 to 70 °C and supports process temperatures from -20 to 120 °C for pH, ORP, and conductivity applications. The unit is rated for humidity levels between 0 to 90% Relative Humidity, non-condensing.
- Enclosure Rating: NEMA 4X polycarbonate
- Sensor Input Ranges: - pH: -600 to +600 mV - ORP: -999 to +999 mV - Conductivity: 0 to 9999 Ω - Flow Pulse: 0 to 2000 Hz
- Power Supply: 16-32 VDC (24VDC nominal), loop-powered design consuming max 20 mA @ 24 VDC
Configuration Options
The AM-2250TX is configured as a transmitter without relay outputs or backlit LCD displays, distinguishing it from AC-powered controller variants in the series. It provides one scalable analog output and supports various sensor configurations.
Sensor & Calibration Options
- pH Sensors: 6-wire differential or combination types with automatic/manual calibration (2 or 3 points)
- ORP Sensors: Single-point manual calibration
- Conductivity Cells: 4-wire contacting sensors supporting cell constants from 0.01 to 100; up to 16-point wet or dry calibration available
- Flow Inputs: K-factor input for pulse output devices (paddle-wheel, magmeter)
Outputs & Mounting
- Analog Output: One optically isolated, fully scalable 4-20 mA signal with optional PID control; max load resistance of 800 Ω
- Mounting Options: Wall mount or panel mount (kit provided); DIN-rail and pipe mounting kits available as options
Certifications & Physical Specs
- Approvals: ETL (US and Canada), CE pending, RoHS Compliant
- Dimensions: Front cover 5.5"x5.5" (14 cm x 14 cm); Depth 5" (13 cm)
- Panel Cut-out: 5.4" x 5.4" (138 x 138 mm) full DIN
Key Product Differences
The AM-2250TX is the loop-powered transmitter version of the AquaMetrix series, distinct from the AC-powered AM-2250 and AM-2251 controllers. Key differences include:
- No relay outputs or power-relay circuit board
- Non-backlit LCD display due to power constraints
- Single 4-20 mA output versus dual outputs on AC-powered models