검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-WRBT

멀티 제트 수도계량기, 분리형 바닥, ECO BRASS® - 정확한 총계량

マルチジェット水道メーター、取り外し可能なボトム、ECO BRASS® - 高精度積算
  • 분리가능한 하단부로 청소 시 용이한 접근성 제공
  • 멀티 제트 설계로 저유량 응용에서도 넓은 유량 범위에 대해 간단하고 정확한 측정 가능
  • 자기 구동, 밀폐형 계량기는 누수나 김서림 없이 완전히 물과 분리됨
  • 장기간 사용과 무유지보수 운전을 위해 설계됨
  • 계량기를 입자 손상으로부터 보호하는 일체형 스트레이너 포함
  • 포함된 커플링 어댑터로 간편한 설치
  • 유량에 비례하는 펄스 출력으로 원격 유량 총계 가능
Series-WRBT
시작 ¥ 39,560
マルチジェット水道メーター、取り外し可能なボトム、ECO BRASS® - 高精度積算 Series-WRBT Series-WRBT
loading all models
제품 개요
  • 정확도 ± 1.5 %, 전이 유량 ~ ± 3 %
  • 응용 분야 농업 및 수경재배 응용, 유체 측정 및 제어, HVAC
  • 전기 연결 피그테일 리드
  • 전기 등급 0.01 A @ 24 Vac/Vdc
  • 접액부 재질 ABS, 금관
  • 미디어 호환성 정제 공정 / 냉각수
  • 장착 방향 수직
  • 작동 온도, 최대 122 °F
  • 출력 세부 정보 유량에 비례하는 주파수의 펄스 출력
  • 출력 신호 DC 펄스
  • 프로세스 연결 유형 NPT 수나사
  • 증명압 최대 150 psi
  • 시리즈 ID Series-WRBT
  • 전반적인 과시, 최대 9999999.99갤런

Supported Applications

The Dwyer Series WRBT Removable Bottom Multi-Jet Water Meters are mechanical water totalizing meters designed to display total water usage in Gallons, with m³ options available. These instruments serve applications requiring accurate flow measurement and totalization for cold water services.

Operating Conditions & Performance

The Series WRBT operates within a process temperature limit of 122°F (50°C) and a pressure rating of 150 psi (10 bar). Accuracy is specified as ±3% for Transitional Flow and ±1.5% for Nominal Flow. The meters are designed to be mounted horizontally with the register facing up.

Flow ranges vary by model size, covering nominal flow bands from 1 to 20 GPM up to 8 to 160 GPM. Maximum display capacity reaches 9,999,999.99 Gallons for smaller sizes and 9,999,999.9 Gallons for larger models.

Wetted Materials

  • Body: ECO BRASS® alloy
  • Couplings: ECO BRASS® alloy
  • Measuring Chamber: ABS Plastic

Configuration Options

The series supports a range of body sizes and coupling configurations to accommodate different pipe dimensions. Process connections include NPT or optional BSPT couplings in sizes ranging from 1/2" NPT to 2-1/2" (for the 2-inch size). The ECO BRASS® alloy body features a removable section that allows for disassembly to clean collected debris while maintaining performance.

Electrical and Output Options

The meters provide a pulse output with frequency proportional to flow rate. Pulse options are available as 10 gal per pulse or 100 gal per pulse, depending on the model configuration. Electrical requirements are rated at 0.01 A @ 24 VAC/DC.

  • Electrical Connections: Color-coded lead wires, 4.5' (1.5 m) long
  • Pulse Rates: Configurable for 10 gal or 100 gal per pulse

Model Number Configuration

The model number guide follows the format WRBT - [Unit of Measurement] - [Cold Water] - [Size Code] - [Pulse Rate]. For example, WRBT-A-C-01-10 indicates a Gallon unit (-A), Cold Water service (-C), 5/8" x 1/2" size (01), and 10 gal pulse rate (-10).

Key Product Differences

Variants within the Series WRBT differ primarily by coupling size, nominal flow range, maximum display capacity, and weight. The series includes models with short length couplings (e.g., "SL" designators) and long configurations to fit specific installation spacing.

  • Size 01 & 02: Nominal Flow 1 to 20 GPM, Max Display 9,999,999.99 Gallons
  • Size 03, 04, & 05: Nominal Flow 2 to 30 GPM, Max Display 9,999,999.99 Gallons
  • Size 06: Nominal Flow 3 to 50 GPM, Max Display 9,999,999.99 Gallons
  • Size 07 & 08: Higher flow ranges (5 to 100 GPM and 8 to 160 GPM respectively) with a reduced decimal resolution on the display maximum of 9,999,999.9 Gallons.

Note: The Series WRBT is not field serviceable; attempting repair may void the warranty. Thread protectors should remain in place during storage to protect meter spud threads.

ko-KR
ja_JP
설정 저장