検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

LC321

ねじ付き中央穴付きミニチュア圧縮荷重セル

  • ロボット用途向けミニチュアパッケージ、直径1.5インチ(38 mm)
  • 取り付けが簡単なねじ込み式センターホール
  • 59 kΩシャント校正データによる5点校正
  • 超薄型プロファイル
LC321
販売元 ¥ 179,728
ねじ付き中央穴付きミニチュア圧縮荷重セル LC321 LC321
loading all models
製品の概要
  • 5点校正 0%, 50%, 100%, 50%, 0%
  • 精度 ± 2 %
  • ケーブル長 5 ft
  • 校正オプション 5点NIST
  • 力タイプ 圧縮
  • 入力抵抗 360 Ω 最小
  • ロードセルタイプ パンケーキ
  • 材料 ステンレス鋼
  • 動作温度(最高) 121 °C
  • 動作温度(最低) -54 °C
  • 出力抵抗 350 ± 5 Ω
  • プロセス温度(最高) 71 °C
  • プロセス温度(最低) 16 °C
  • 安全過負荷 150% FS
  • シリーズID LC321
  • 電源注記 10 Vdc、最大15 Vdc
  • 供給電圧 10 Vdc
  • 熱スパン効果 0.010% rdg/°F
  • 熱ゼロ点効果 0.005% FSO/°F
  • ゼロ点/バランス誤差 ± 2%

Supported Applications

The Omega LC321 Series consists of miniature compression load cells designed for robotic applications and industrial environments. These units feature an ultra-low profile construction to accommodate space-constrained installations while providing long life and high reliability in force measurement tasks.

Operating Conditions & Performance

The series operates within a temperature range of -54 to 121°C (-65 to 250°F), with thermal compensation specified for 16 to 71°C (60 to 160°F). Thermal effects are rated at Zero: 0.005% FSO/°F and Span: 0.01% rdg/°F. The load cells deliver an output signal of 2 mV/V with a maximum excitation voltage of 15 Vdc (nominal 10 Vdc). Accuracy is specified as ±2.0% FSO linearity, hysteresis, and repeatability combined, with a zero balance of ±2% FSO.

Each unit undergoes a 5-point calibration at 0%, 50%, 100%, 50%, and 0%. The series carries an IP65 protection class rating. Electrical specifications include an input resistance minimum of 360 Ω and an output resistance of 350 ±5 Ω.

Configuration Options

The LC321 Series is available in five capacity ranges, covering 0-250 lb to 0-2000 lb (0-114 kg to 0-909 kg). The model number follows the format LC321-<CAPACITY>, with specific examples including LC321-750 and LC321-1K. Key configurable or fixed attributes include:

  • Construction Material: Stainless steel housing.
  • Process Connection: 1/4-28 UNF THRU threaded center hole with a diameter of 13 mm (.516").
  • Dimensions: Overall diameter of 38 mm (1.50") and height of 10 mm (0.40").
  • Cable Assembly: Includes a 1.5 m (5') 4-conductor shielded cable.
  • Calibration Documentation: Shipped with NIST Standard traceability and includes 59 kΩ shunt data.

The series is RoHS compliant. Compatible meters listed for the LC321 include DPiS, DP41-S, and DP25B-S models.

Key Product Differences

Variation within the LC321 Series is defined by load capacity. The available capacities are 250 lb (114 kg), 500 lb (227 kg), 750 lb (341 kg), 1000 lb (455 kg), and 2000 lb (909 kg). All variants share the same physical dimensions, stainless steel construction, threaded center hole configuration, electrical output characteristics, and environmental ratings.

ja-JP
ja_JP
設定を保存する