한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-MDPC
가스용 미니 디지털 압력 컨트롤러 - 고정밀, 6단위, LED 디스플레이
ミニデジタルガス圧力コントローラー - 高精度、6単位、LED表示- 에너지 절약 모드
- 선택 가능한 색상 옵션의 3색 디스플레이: 녹색, 빨강, 주황
- 아날로그 출력 기능
- 파라미터 복사 기능
- 단위 변환 기능: inHg, psi, kPa, mmHg, kg/cm² 및 bar
- 사용자가 선택 가능한 출력 응답 시간 10단계
- 키 잠금 기능
- 빠른 제로 리셋
Series-MDPC
From
¥
27,434
Product Overview
- 정확도 ± 3%
- 정확도 세부 사항 풀 스케일의 ± 3%
- 디스플레이 사이클 100ms, 250ms, 500ms 또는 1000ms로 프로그래밍 가능
- 디스플레이 노트 2라인 LCD 디스플레이, 측정값 4자리 및 설정 표시 3.5자리 표시 주기: 100 ms, 250 ms, 500 ms 또는 1000 ms로 프로그래밍 가능
- 디스플레이 유형 LCD
- 재료 폴리카보네이트, PBT
- 접액부 재질 니켈 도금 된 황동
- 미디어 호환성 깨끗한 건조 공기 / 불활성 가스, HVAC / 실내 공기, 비활성 가스/비반응성 가스
- 표시 자릿수 4
- 작동 온도, 최대 185 °F
- 최소 작동 온도 -40 °F
- 전력 소비 60 mA + 출력 전류
- 압력, 최소 -14.5 psi
- 압력 유형 궤간
- 프로세스 연결 사양 참고 1/8˝ NPT, 내부 연결 M5, 1/8˝ PT 접점 공장용.
- 프로세스 연결 크기 1/8인치
- 공정 온도, 최대 122 °F
- 최소 공정 온도 32 °F
- 응답 시간 2 ms
- 시리즈 ID Series-MDPC
- 저장 온도, 최대 149 °F
- 보관 온도 최소 -4 °F
- 공급 전력 참고 12~24 Vdc ± 10% 비절연
- 전원 유형 DC
- 공급 전압 12 ~ 24 Vdc
- 스위치 등급 100 mA @ 30 Vdc
- 무게 1.3 oz
- 제로 설정 조절 범위 범위 내에서 메뉴로 스케일 조정 가능
Supported Applications
The Dwyer Series MDPC is a mini digital pressure controller designed for non-corrosive gas and air pressure measurement. The series supports applications in high-tech electronics, general processing, food packaging, and automatic assembly environments.
- Air pressure monitoring with positive and negative (vacuum) detection
- Industrial process control requiring compact instrumentation
Operating Conditions & Performance
The Series MDPC operates within an ambient temperature range of 32 to 122°F (0 to 50°C), with a storage temperature limit of -4 to 149°F (-20 to 65°C). The device is rated for non-corrosive gas service and features wetted materials consisting of brass with nickel plating. Measurement accuracy is specified as ±3% of full range, while analog output linear inaccuracy remains below +/- 2% entire process.
- Power supply: 12 to 24 VDC ±10% (no isolation)
- Response time: Programmable from 2ms to 5,000ms
- Vibration resistance: Max. 100m/s² 3 axes 6 directions, 3 times each
- Shock resistance: 10 to 500Hz, 10mm 3 axes for 2 hours
Configuration Options
The series offers configurable pressure ranges, output types, and process connections. Two primary measurable ranges are available:
- MDPC-1: -14.5 to 14.5 psi (-100 to 100 kPa)
- MDPC-2: -14.5 to 145 psi (-100 to 1,000 kPa)
Digital switch outputs are available in NPN or PNP transistor configurations (Max. durable pressure 30V/100mA). Analog retransmission options include 1 to 5 VDC and 4 to 20 mA signals with specific load resistance requirements: minimum output load resistance of 1,000Ω for voltage outputs and maximum output load resistance of 400Ω for current outputs.
- Process connections: Outer connection PT1/8" or NPT1/8", inner connection M5
- Housing materials: Polycarbonate and polybutylene terephthalate
- Display: 2-line LCD with 4 digits for measured value, 3.5 digits for setup; status display in red, green, or orange
Key Product Differences
The Series MDPC is distinguished by model codes that define the pressure range and output configuration. Models ending in "1" (e.g., MDPC-111) typically denote specific switch configurations, while models with a second digit of 2 or higher indicate analog retransmission capabilities.
- MDPC-1xx series: -14.5 to 14.5 psi range; Max durable pressure 29psi (200kPa)
- MDPC-2xx series: -14.5 to 145 psi range; Max durable pressure 217.6 psi (1,500 kPa)
The device supports six user-selectable pressure units including kPa, kgf/cm², bar, psi, mmHg, and inchHg. Optional accessories include bracket installation kit A-152 and panel installation kit A-153.
PDFs & Manuals

