日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
OPTIDEW
Michell Optidew チルドミラー湿度計
- 新しい冷却鏡ハイブリッドセンサーが湿度変化に対して高速な動的応答を提供
- 露点±0.15 °C、温度±0.1 °Cの高精度
- 露点-40~+120 °Cの広範囲測定
- イーサネット通信によるModbus TCPを含む複数の通信方式を選択可能でネットワーク構築が容易
製品の概要
- 精度 ± 0.15 °C (± 0.27 °F)
- 精度の詳細 露点測定精度:±0.15 °C(±0.27 °F);温度測定精度:±0.1 °C(±0.18 °F);リモート圧力精度:±0.25% FS
- 応用例 空気, 化学精製所, クリーンルーム, エンジン試験台, 環境と気象, 環境モニタリング, 流量測定, HVAC, 産業および製造業, 研究所, 製薬, 温度維持, 廃水の応用
- 本体材質 アルミニウム
- ケーブル温度(最高) 90 °C
- ケーブル温度(最低) -25 °C
- 制御出力 リレー、警報
- 露点温度入力範囲 -25 ~ 90°C
- 寸法に関する注意事項 Optidew 501(壁掛け):220 x 175 x 75 mm。Optidew 401(卓上型):220 x 175 x 118 mm。コントロールユニット1.5 kg(3.3ポンド)、センサー200 g(7.05オンス)。 筐体材質:ABS。
- 表示単位 bar, °C, °F, g/kg, g/m³, kPa, Pa, ppmV, psi, %RH
- 表示サイズ 5.7インチ
- 表示タイプ カラーLCDタッチスクリーン
- 電気出力 0~20 mA
- 筐体材質 ABS
- エンクロージャーの定格 IP54
- 長さ 220 mm
- 荷重抵抗 最大負荷 500Ω
- 取付方向 ベンチトップ
- 消費電力 最大30 VA
- 選択可能な圧力範囲 0から160kPa、0から2500kPaまで
- プロセス接続サイズ 1/8インチ
- プロセス接続タイプ NPT オス
- 保護 アクティブコンポーネントアイソレーションシステム
- 繰り返し精度 ±0.05°C(±0.09°F)
- 応答時間 +10°C(+50°F)で1分以内に安定した差圧測定
- RTD タイプ Pt1000、クラス A
- 検出感度 ±0.01°C(±0.018°F)
- センサーの温度依存性 制御ユニット:1.5 kg(3.3 lb)、センサー:200 g(7.05 oz)
- シリーズID OPTIDEW
- 電源注記 100~240 VAC、50~60 Hz、最大30 VA
- 供給電圧 100から240 Vac
- 重量 1.5 kg
- ウェイトノート 制御ユニット:1.5 kg(3.3 lb)、センサー:200 g(7.05 oz)
- 幅 175 mm
Supported Applications
The Michell Optidew series comprises chilled mirror hygrometers designed for industrial humidity control and precision laboratory applications. The system combines the fast response of polymer relative humidity sensors with drift-free reliability, measuring dew point, temperature, and relative humidity.
- Bench top configurations (Optidew 401) feature a display unit suitable for stationary monitoring.
- Wall mount configurations (Optidew 501) are available as units with displays or transmitter-only versions.
Operating Conditions & Performance
The series provides dew point measurement ranges of -40 to +90°C (-40 to +194°F), -25 to +90°C (-13 to +194°F), and an extended range of -40 to +120°C (-40 to +248°F) depending on the selected sensor head. Accuracy is specified as ±0.15°C (±0.27°F) for dew point and ±0.1°C (±0.18°F) for temperature, with a repeatability of ±0.05°C (±0.09°F). The system achieves stable measurement at +10°C (+50°F) dp within 1 minute.
Operating ambient conditions are -20 to +50°C (-4 to +122°F), supporting up to 100% rh non-condensing, or 100% rh condensing with the IP65 connector version. The sensor head materials include POM (head) and Aluminum (body) for standard configurations, while harsh environment options utilize PEEK (head). Wetted parts are highly resistant to corrosion from acids and other gas contaminants.
Configuration Options
Sensor Heads & Ranges
- POM Head, 1-Stage: -25 to 90°Cdp
- POM Head, 2-Stage: -40 to 90°Cdp
- Harsh Environment (PEEK) Head, 2-Stage: -40 to 120°Cdp
Housing & Mounting Options
The Optidew 501 series offers wall mount cases with display or transmitter-only configurations. Enclosure ratings include IP54 standard and optional IP65 (restricted to RS485 communications only for certain models). Dimensions are 220 x 175 x 118 mm (8.66" x 6.89" x 4.65") for bench top units and 220 x 175 x 75 mm (8.66" x 6.89" x 3") for wall mount cases.
Outputs & Communications
- Analog: Two 0/4–20 mA outputs with a maximum load of 500Ω.
- Digital Standard: Modbus RTU over RS485 and USB port.
- Digital Optional: SD card slot, Modbus TCP over Ethernet (available on select models).
Calibration & Accessories
Factory calibration options include Standard Traceable DP Cal (4 points) or UKAS / ISO17025 certified calibrations for Dew Point (5 points) and Relative Humidity (5Ps @ one temperature). The series supports optional pressure transmitters (OPT2-PS16: 0 to 160kPa(A); OPT2-PS25: 0 to 2500kPa(G)) for accurate calculation of ppmᵥ & g/kg. Additional accessories include sensor sampling blocks, extended heatsinks, sintered aluminum guards with PTFE coating, and various cable lengths (0.3m to 20m) rated for standard or high-temperature applications.
Key Product Differences
The series is divided into two primary model families: the Optidew 401 Bench Top Hygrometer with display and the Optidew 501 Wall Mount Hygrometer. The Optidew 501 offers distinct case configurations including wall mount units with displays, IP65-rated versions restricted to RS485 communications only, and transmitter-only housings without local displays.
Communication capabilities vary by model selection; while USB and SD card interfaces are standard on many variants, the optional Ethernet interface is available for specific configurations. High-temperature sensor cables (OPT2-HTSC series) support measurements up to 120°C with probe leads rated to 250°C at the connector.
OPT401OPT501-ABCDABCABCABCDEFGHJABABCD
基本モデル
ケース
センサー
校正
露点および温度用ケーブル
デジタル通信(Optidew 401)
デジタル通信(Optidew 501)
注文コード:https://assets.dwyeromega.com/0/order-codes/791_Optidew401_501_97552_Order_Codes.pdf


