検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

LCMWD

メトリック、高精度、ボルト圧縮測定用ロードワッシャー

  • 5点NISTトレーサブル校正付き
  • 200 kNまでのレンジ
  • コンパクト設計
  • 球面ワッシャー付属
LCMWD
販売元 ¥ 139,270
メトリック、高精度、ボルト圧縮測定用ロードワッシャー LCMWD LCMWD
loading all models
製品の概要
  • ケーブル長 5 ft
  • 校正オプション 5点NIST
  • 電気接続 ケーブル
  • 力タイプ 圧縮
  • フルスケール振れ 0.001 in
  • ロードセルタイプ ロードワッシャー
  • 材料 ステンレス鋼
  • 動作温度(最高) 127 °C
  • 動作温度(最低) -40 °C
  • 過負荷、最大 200% FS
  • プロセス温度(最高) 71 °C
  • プロセス温度(最低) 16 °C
  • 安全過負荷 120% FS
  • シリーズID LCMWD
  • 電源注記 10 Vdc、最大15 Vdc
  • 供給電圧 10 Vdc
  • 熱スパン効果 ± 0.018% FSO/°C
  • 熱ゼロ点効果 ± 0.018% FSO/°C
  • 配線/コネクタテーブル 赤:+励起;黒:-励起;緑:+出力;白:-出力
  • ゼロ点/バランス誤差 ± 4%

Supported Applications

The Omega LCMWD series consists of metric, high accuracy load washers designed to measure bolt compressional forces. These units function as compression load cells intended for use with bolts in structural and mechanical assemblies.

  • Bolt tension monitoring via compressive force measurement
  • Compression testing applications requiring through-hole installation

Operating Conditions & Performance

The LCMWD series operates within an ambient temperature range of 16 to 71°C (60 to 160°F) and a process temperature range of -40 to 127°C (-40 to 260°F). Accuracy is specified as ±0.5% BFSL for capacities ≤10K lb/50 kN and ±0.75% BFSL for >10K lb/50 kN, with performance defined by combined linearity, hysteresis, and repeatability.

  • Excitation voltage: 10 Vdc (15V maximum)
  • Output signal: <500 lb/2kN provides 1 mV/V nominal; ≥500 lb/2kN provides 2 mV/V nominal
  • Load resistance: <50K lb/200 kN is 350 Ω min; ≥50K lb/200 kN is 700 Ω

Configuration Options

The series supports a measurement range from 0-1000 to 0-200 kN (equivalent to 0-200 lb to 0-200,000 lb). Each unit is constructed of stainless steel and includes spherical washers and load buttons. The standard electrical connection features a 1.5 m (5') insulated shielded cable with the following wiring code: RED (+EXC), BLACK (-EXC), GREEN (+OUT), WHITE (-OUT).

Available Capacities

Metric models are available in capacities of 1000 N, 2000 N, 5000 N, 10,000 N, 20,000 N, 50,000 N, 100,000 N, and 200,000 N. Dimensional envelopes vary by capacity; for example, the ≤10K lb (50 kN) size has an ID of 10.2 mm (0.40 inch), OD of 25 mm (1.0 inch), and height of 9.0 mm (0.35 inch).

Signal Conditioning & Accessories

  • iDRX-ST: Digital signal conditioner for strain gages and bridge transducers with RS485 output, offering 13-Bit Resolution.
  • iDRN-ST: Signal conditioner for strain gages and bridge transducers with analog output.
  • Factory setup and scaling option (-FS).

Key Product Differences

The LCMWD series represents the metric configuration of the load washer family, distinct from standard (inch) models. Metric units come complete with 5-point NIST-traceable calibration and 59 kΩ shunt data, whereas standard models include 4-point NIST-traceable calibration. Model numbers follow the format LCMWD-<CAPACITY>KN (e.g., LCMWD-100KN). Compatible meters for these units include DPiS, DP41-S, and DP25B-S.

ja-JP
ja_JP
設定を保存する