検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-MAFS

金属製平均流量センサー(正確なダクト空気速度測定用)

  • ブレード設計により気流の乱れを抑制
  • 軽量アルミニウム構造
  • 長方形または正方形ダクト用フランジマウント
Series-MAFS
販売元 ¥ 12,574
金属製平均流量センサー(正確なダクト空気速度測定用) Series-MAFS Series-MAFS
loading all models
製品の概要
  • 精度 ± 2 %
  • 精度の詳細 400~9000 FPM(45.7 m/s);±2% FS、6インチ(160 mm)および48インチ(1200 mm)長モデルは±3% FS
  • コンプライアンスに関する注意事項 EU指令2011/65/EU(RoHS II)の技術要件を満たす
  • 直径 0 in
  • ガスケット温度(最大) 230 °F
  • ガスケット温度(最小) -31 °F
  • 高さ 0 in
  • 材料、湿潤 アルミニウム
  • 対応媒体 HVAC / 室内空気
  • 動作温度(最高) 400 °F
  • プロセス接続サイズ 3/16インチ、1/4インチ
  • プロセス接続タイプ チューブ
  • シリーズID Series-MAFS
  • ストレートランの要件 直径5
  • ベロシティ、マックス 12000 FPM
  • 速度、最小 400 FPM

Supported Applications

The Dwyer Series MAFS Metal Averaging Flow Sensor is designed for accurate duct air velocity measurement in HVAC systems. The sensor uses evenly distributed total and static pressure measuring points to deliver an accurate measurement of flows within a duct. It is intended for use with clean air media.

Operating Conditions & Performance

The Series MAFS operates across a flow range of 400 to 9,000 FPM (45.7 m/s), with a minimum design flow of 400 FPM (2 m/s) and a maximum design flow of 12,000 fpm (60.96 m/sec). The sensor is rated for process temperatures up to 400°F (204°C).

Accuracy specifications are ±2% FS across the standard range, with ±3% FS specified for 6" (160 mm) and 48" (1200 mm) length models. The K-Factor varies by probe length: 0.81 is listed generally; specific values include 0.80 for 6" (160 mm) and 48" lengths, and 0.82 for the 4" model.

Installation requires a straight run of 5 diameters or longest side dimensions upstream of the sensor. For rectangular ducts, probe quantity depends on short duct dimension: one probe is required for ducts less than 12" (<305 mm), two probes for 12" - 23" (610 mm - 889 mm) ranges are not explicitly defined in the table but follow the progression of three probes for 24" - 35" and four probes for 36" - 48" ducts.

Configuration Options

The series is constructed from lightweight aluminum with wetted materials specified as Aluminum AA6063. The sensor features a flange mount suitable for rectangular or square duct installations and includes dual barb connections compatible with 3/16" or 1/4" ID tubing.

Probe Lengths

The Series MAFS is available in multiple probe lengths to accommodate various duct sizes. Models are designated by length in inches (e.g., MAFS-04 through MAFS-48) or millimeters (e.g., MAFS-100MM through MAFS-2000MM). Available inch-based models include 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36, 40 inches. Millimeter-based models range from 100 mm to 2000 mm.

Compliance

The product meets the technical requirements of EU Directive 2011/65/EU (RoHS II).

Key Product Differences

Variants within the Series MAFS differ primarily by probe insertion length, which determines suitability for specific duct dimensions. The model number follows the format MAFS-, where the suffix indicates either inches or millimeters (e.g., MAFS-100MM). Accuracy and K-Factor values vary based on these lengths; specifically, 6" (160 mm) and 48" models have a ±3% FS accuracy rating compared to the standard ±2% FS.

The sensor is not field serviceable. If repair is needed, units must be returned with a Return Goods Authorization number after contacting customer service.

MAFS-カスタムmm
チューブの長さ
単位
"
ja-JP
ja_JP
設定を保存する