日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
UMR14-Series
中距離超音波レベル/距離トランスミッター-スイッチ
- タイプ316ステンレス鋼ハウジング(PVCモデルを除く)
- 堅牢な圧電式超音波トランスデューサー
- 硬化および保護されたソリッドステート電子回路
- UV耐性、ポッティング済み、PURジャケットケーブル
UMR14-Series
販売元
¥
162,624
製品の概要
- 精度 ± 0.5 %
- ケーブル長 6.5 ft
- 電気出力 2 出力 (4~20 mA、0~10 V)
- エンクロージャーの定格 IP68, NEMA タイプ 4X
- ループ抵抗 450 Ω 最大 @ > 15 Vdc、250 Ω 最大 @ 10 Vdc
- 測定範囲(最大) 14 ft
- 測定範囲(最小) 4 ft
- 対応媒体 任意, クリーンな乾燥空気 / 不活性ガス, プロセス水/冷却水, 腐食性化学薬品/酸/アルカリ, 燃料ガス, HVAC / 室内空気, 油圧流体, 不活性/非反応性ガス, 液体, 油/潤滑油, 有機溶剤, 蒸気
- メモリ 不揮発性
- 動作湿度 0~100% RH
- 動作圧力(最大) 50 psi
- 動作温度(最高) 70 °C
- 動作温度(最低) -40 °C
- 出力信号 電流、電圧
- 抵抗値の分解能 0.0034インチ
- シリーズID UMR14-Series
- トランスデューサ周波数 120 kHz
- 超音波ビーム幅 -3dBで12°
Supported Applications
The Omega UMR14 Series is a medium-range ultrasonic level/distance transmitter-switch designed for non-contact distance measurement in tough industrial environments. As part of the broader U-Series family, these sensors measure liquid or solid levels and proximity without physical contact with the target material.
- Ultrasonic non-contact distance measurement (level, proximity, dimensioning)
Operating Conditions & Performance
The UMR14 model provides a maximum range of 14 ft. (4.3 m) with a minimum deadband of 4 in. (10.2 cm). The optimum operating range is specified as 4 in. (10.2 cm) to 10 ft (3m), particularly for small targets, dry materials, or hot conditions.
- Accuracy: Better than 0.5% of target distance in stable, homogeneous air environment; affected by temperature gradients, target echo strength, speed of sound in air or vapors
- Repeatability: Greater of +/-0.03 in. (0.76 mm) or 0.25% of target distance in stable environment
- Ambient Temperature: -40 to +158 F (-40 to +70 C), temperature compensated by internal sensor or external Reference Target
- Humidity: 0-100% (avoid heavy condensation)
- Ingress Protection: IP-68, NEMA-4X
- Measurement Rate: Default 50 msec (20 Hz); adjustable from 5 msec to 2.8 hours; faster rates limit max target distance and are affected by filter selections
Analog Resolution & Output Load
The analog output resolution provides 4100 steps over 0-10 VDC and 3279 steps over 0-20 mA, scaled between user-set distance endpoints. Serial data resolution is 0.0034 in. (0.086 mm). Current loop load resistance limits are 450 Ohm max @ >15VDC or 250 Ohm max @ 10 VDC; maximum loop resistance is 500 Ohm @ 24 VDC sensor input voltage.
Configuration Options
The UMR14 Series supports multiple simultaneous outputs configurable via OmegaVIEW PC software or a rear TEACH pushbutton (except on serial-only models). The series offers full-featured configurations with two selectable outputs, including solid-state switches and analog signals.
Housing & Mounting
- Material: 316 Stainless steel housing for UMR14 sensors
- Mount Options: m30x1.5 metric thread or 1-in NPT thread (part number suffixes -30MM and -1NPT)
- Dimensions: 1.2 in. (30.4mm) dia x 4.064 in. (103mm) length
Electrical & Communication Interfaces
- Power Supply: 10-30 VDC @ 55 mA max; typical 45 mA @ 24VDC input +I/O; serial-only models draw typical 35 mA @ 24VDC
- Analog Outputs (OmegaVIEW selectable):
- 0-10 VDC voltage (or custom, OmegaVIEW configured), 10 mA max; requires min 15 VDC input for full 10 VDC output
- 4-20 mA sourcing current loop (or OmegaVIEW configured 0-20 mA custom)
- Solid State Switches: 150 mA, PNP (@ input voltage) or NPN (external 40 VDC max.), configurable as setpoint mode or window mode
- Serial Interface Options:
- RS-232 (PC COM port)
- RS-485: 2-wire multi-drop addressable (addresses 1-247), Baud rates 9600 - 115200, none or even parity, 8 bits, one stop bit
- Cabling: Embedded 6.5-ft (2m) shielded PUR cable with tinned ends; 6-wire for full outputs, 4-wire for serial-only models. M12 connector on 18 in. cable available.
Configuration & Accessories
Sensors are configured using OmegaVIEW software (free download) or the TEACH pushbutton. PC interface kits include KIT-USB-232 and KIT-USB-485 with converter, terminal block, power supply, and data cable. Mounting accessories include MB30-SS90 stainless steel 90-degree mounting bracket and NUT30-SS316 one pair (SS316) stainless steel m30x1.5 nuts.
Key Product Differences
The UMR14 Series is distinguished within the Omega U-Series by its specific range envelope of 14 ft. (4.3 m). While other series members offer different ranges—USR03 at 3 ft, ULR30 at 30 ft, and UXLR50 at 50 ft—the UMR14 maintains a transducer frequency of 120 kHz with a nominal beam width of ~12 degrees @ -3 dB.
- Model Number Structure: [PRODUCT]-[MOUNT]-[SERIAL INTERFACE]. For example, UMR14-1NPT-232 indicates the 14 ft range sensor with 1-in NPT thread and RS-232 interface; UMR14-30MM-485 indicates m30x1.5 metric mount with RS-485.
- Output Configuration: Full-output models provide two outputs selectable via OmegaVIEW (voltage, current loop, or switches). Serial-only versions are available but lack analog/switch outputs on the embedded cable wires designated for those functions.
Note: Output selection is made before connecting to equipment and is not affected by a TEACH 17 reset. A power supply voltage between 15-30 VDC is recommended; target sensitivity and maximum voltage output value are reduced at voltages below 15 VDC.
PDFとマニュアル
ソフトウェアとドライバー