日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-2000-SP
Magnehelic® 差圧計、設定値表示 赤色LED、調整可能
製品の概要
- 精度の詳細 FSの±2%(-HAモデルは±1)、-0、-100PA、-125PA、-10MMレンジでは±3%(-HAは±1.5%)、-00、-60PA、-6MMレンジでは±4%(-HAは±2%)、70°F(21.1°C)での全レンジにわたる。
- 追加機能 1 LED設定点インジケーター
- ダイヤル直径 4インチ
- デュアル false
- エンクロージャーの定格 IP67
- 材料 アルミニウム、アクリル
- 材料、湿潤 メーカーにお問い合わせください
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取付方向 垂直ダイアフラム
- 動作温度(最高) 140 °F
- 動作温度(最低) 20 °F
- 圧力限界 -20 inHg から 80 psi
- 圧力(最小) 0 inH₂O
- 圧力タイプ 差分
- プロセス接続に関する注記 1/8˝ メスNPT複製高圧および低圧タップ - 片側に1対、背面に1対。
- プロセス接続サイズ 1/8インチ
- プロセス接続タイプ NPT メス
- 安全機能 リリーフプラグは約25 psig(1.72 bar)で開きます。標準ゲージのみ。
- シリーズID Series-2000-SP
- 重量 510 g
Supported Applications
The Dwyer Series 2000-SP Magnehelic® Differential Pressure Gage combines an analog differential pressure indicator with a setpoint alarm function. Designed for monitoring air and non-combustible, compatible gases (with natural gas options available), the series provides visual indication of applied pressure via a black pointer and activates a red LED when a field-adjustable threshold is reached.
Applications include systems requiring differential or static pressure monitoring where an electrical alarm signal is needed without complex control logic. The photo-optical switching system, utilizing a shielded LED beam and phototransistor, eliminates mechanical wear associated with contact-based switches.
Operating Conditions & Performance
The series operates within an ambient temperature range of 20 to 140°F (-6.67 to 60°C). Accuracy is specified as ±2% of full scale throughout the range at 70°F (21.1°C), with specific tolerances for low-range models: ±3% on -0, -100 Pa, -125 Pa, and 10MM ranges; and ±4% on -00, -60 Pa, and -6MM ranges.
Pressure limits vary by configuration. Standard gages feature a relief plug that opens at approximately 25 psig (1.72 bar). The MP option supports up to 35 psig (2.41 bar), while the HP option is rated for 80 psig (5.52 bar). For best accuracy, standard models are calibrated with the diaphragm in a vertical position; other orientations require factory consultation.
Configuration Options
The Series 2000-SP offers configurable measurement ranges and pressure ratings to suit specific process requirements. The setpoint indicator is field-adjustable from the gage face, allowing operators to change the alarm threshold without tools or disassembly.
- Measurement Ranges: Available in positive (e.g., 0 to 100), negative (-0 to -100), and differential spans across units including inches of water, Pa, mmH2O, mmHg, kPa, mbar, psi, and bar.
- Housing & Finish: Die cast aluminum case and bezel with an acrylic cover. The exterior finish is coated gray to withstand a 168-hour salt spray corrosion test.
- Process Connections: Features duplicate high and low pressure taps (one pair side, one pair back) using 1/8" female NPT threads.
- Power & Output: Operates on a regulated 12–24 VDC supply. The output is a red LED indicator located on the right of the scale that illuminates when pressure reaches the setpoint.
Standard Accessories and Options
The series includes mounting hardware and sealing components tailored to the selected model:
- Standard Models: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters, and three flush mounting adapters with screws.
- MP & HP Options: Mounting ring with snap ring retainer substituted for the standard flush mounting adapters. Includes (2) 3/16" tubing to 1/8" NPT adapters.
Key Product Differences
The Series 2000-SP is distinguished from standard Magnehelic® gages by the addition of the setpoint indicator option, denoted by adding the suffix "-SP" to the base model number (e.g., 2001-SP). This configuration requires an MP or HP style cover and bezel.
Physical dimensions vary slightly between standard and high-pressure configurations. Standard models weigh approximately 1 lb 2 oz (510 g), while MP & HP variants weigh 2 lb 2 oz (963 g) due to reinforced construction. All units feature a 4" (101.6 mm) diameter dial face with a 5-1/2 O.D. mounting ring.
Wetted materials for specific gas applications, including natural gas options, require consultation with the factory. Unused pressure ports must be sealed with the supplied pipe plugs to maintain accuracy and prevent contamination in dusty environments (optional A-331 Filter Vent Plug recommended).
アクセサリー
accessories
3-way vent valve, plastic, 1/8" NPT to 1/4" metal tubing, 80 psi rating, replaces former Model A-310 (brass). 2.3" x .8" x .1", .10 lb.
¥5,053 / 各
0 在庫あり
Plastic carrying case for Magnehelic® gage of standard range, except high pressure connection, includes 9 ft (2.7m) of 3/16" ID rubber tubing, stand-hang bracket & terminal tube with holder. 9.1" x 7.4" x 3.6", 1.30 .lb
¥13,618 / 各
0 在庫あり
Air filter kit - adapts any standard Magnehelic® gage for use as an air filter gage. Includes aluminum surface mounting bracket with screws, (2) 5 ft (1.5 m) lengths of 1/4" aluminum tubing, (2) static pressure tips & (2) molded plastic vent valves.
¥10,597 / 各
0 在庫あり
Air filter kit with (2) plastic open/close valves, (2) 4 in steel static tips, tubing and mounting flange
¥8,328 / 各
0 在庫あり
Air filter kit with (2) plastic open/close valves, (2) plastic static tips, tubing and mounting flange
¥6,531 / 各
0 在庫あり
consumables
Silicone rubber gasket for panel mounting (Series 2000, DM-2000, DM-1000, 605)
¥1,180 / 各
0 在庫あり
installation hardware
Mounting hardware kit for standard Magnehelics® (not MP or HP). Included in the kit: 2 each: A-339 adapters, A-330 pipe adapters; 3 each: mounting lugs, long screws, short screws)
¥2,337 / 各
0 在庫あり
ブラケット内に埋め込み取り付けされたMagnehelic®ゲージ。ブラケットは表面取り付け式。スチール製、グレーのハンマートーンエポキシ仕上げ。サイズ:6.3" x 7.7" x 4.0"、重量:1.30ポンド。
¥8,845 / 各
0 在庫あり
Flat aluminum bracket for flush mounting Magnehelic® gage. 6.8" x 6.0" x .1", .35 lb.
¥7,796 / 各
0 在庫あり
Surface mounting bracket, use with Photohelic® switch/gage on horizontal or vertical surfaces, also for Capsu-Photohelic® switch/gage on vertical only. Also Magnehelic® -MP, -HP models.
¥11,088 / 各
0 在庫あり
Stainless steel flush mounting kit for the Magnehelic® gages (Magnehelic® sold separately)
¥27,979 / 各
0 在庫あり
2000-00N2000-002000-02001200220032004200520062008201020152020202520302040205020602080210021502300-02301230223042310232023302000-00AV2000-0AV2001AV2002AV2010AV2003D2201220222032204220522102215222022302000-6MM2000-10MM2000-20MM2000-25MM2000-50MM2000-80MM2000-100MM2000-150MM2000-250MM2300-20MM2300-30MM2000-1CM2000-2CM2000-5CM2000-10CM2000-15CM2000-20CM2000-25CM2000-30CM2000-40CM2000-50CM2000-80CM2000-100CM2000-150CM2000-200CM2000-250CM2000-300CM2300-4CM2300-10CM2300-20CM2300-30CM2000-60PA2000-125PA2000-250PA2000-300PA2000-500PA2000-750PA2300-250PA2300-500PA2000-1KPA2000-1.5KPA2000-2KPA2000-3KPA2000-4KPA2000-5KPA2000-8KPA2000-10KPA2000-15KPA2000-20KPA2000-25KPA2000-30KPA2300-1KPA2300-3KPA-SP-AT-COO-ED-G-HC-HP-LT-M-MP-NIST-R-ST-TA-TAMP-Y
レンジ
ja-JP
ja_JP
設定を保存する

