日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LC8400
大口径 2.5インチ~3.13インチ内径、貫通穴、圧縮荷重セル
- 5点 NIST トレーサブル校正付き
- 59 kΩ シャント校正データ
- 3.13、4.00、および4.50インチ外径サイズ
- 大口径用途
製品の概要
- 5点校正 0%, 50%, 100%, 50%, 0%
- 精度 ± 0.5 %
- ケーブル長 5 ft
- 校正オプション 5点NIST
- 電気接続 ケーブル
- 電気出力 2 mV/V
- 力タイプ 圧縮
- ヒステリシス ±0.5%
- 入力抵抗 360 Ω 最小
- 直線性 ±0.5%
- ロードセルタイプ 貫通穴
- 材料 17-4 PH ステンレス鋼
- 動作温度(最高) 121 °C
- 動作温度(最低) -54 °C
- 出力抵抗 350 ± 5 Ω
- 過負荷、最大 300% FS
- プロセス温度(最高) 71 °C
- プロセス温度(最低) 16 °C
- 繰り返し精度 ±0.5%
- 安全過負荷 150% FS
- シリーズID LC8400
- 電源注記 10 Vdc、最大15 Vdc
- 供給電圧 10 Vdc
- 熱スパン効果 ± 0.018% rdg/°C
- 熱ゼロ点効果 ± 0.009% FSO/°C
- 配線/コネクタテーブル 緑: (+) 出力; 白: (-) 出力; 黒: (-) 入力; 赤: (+) 入力
- ゼロ点/バランス誤差 ± 2%
Supported Applications
The Omega LC8313/LC8400 Series consists of large-ID through-hole compression load cells designed for applications requiring a substantial central opening. These donut-shaped sensors are engineered to measure forces on large bolts or suspended loads where the geometry necessitates a clearance hole.
- Loading forces on large bolts
- Suspended load measurement
Operating Conditions & Performance
The series provides compression measurements across capacities ranging from 0-1000 lb to 0-100K lb (0-455 kgf to 0-45,372 kgf). Accuracy is specified as ±0.5% linearity, hysteresis and repeatability combined. The sensors operate within an ambient temperature range of 16 to 71°C (60 to 160°F) and a process temperature range of -54 to 121°C (-65 to 250°F).
Electrical specifications include a load resistance of 350 ±5 Ω, an output signal of 2 mV/V nominal, and an excitation voltage requirement of 10 Vdc (15V maximum). Each unit includes a 1.5 m (5') 4-conductor shielded cable with the following wire color code: GN (+Output), WT (-Output), BK (-Input), RD (+Input).
Configuration Options
The series is available in three primary model families distinguished by outer diameter and selectable inside diameters (ID): LC8313, LC8400, and LC8450. All models are constructed from 17-4 PH stainless steel.
Dimensions
- LC8313: OD 80 mm (3.13"), H 13 mm (0.50") with selectable IDs of 2.00" or 2.13".
- LC8400: OD 102 mm (4.00"). Height is 25 mm (1.00") for capacities from 1K to 50K, and 51 mm (2.00") for capacities ≥100K. Selectable IDs are 2.00" or 2.13".
- LC8450: OD 114 mm (4.50"), H 32 mm (1.25") with selectable IDs of 3.00" or 3.13".
Certifications and Calibration
The load cells feature NIST Standard certification and RoHS compliance. Units come complete with a 5-point NIST-traceable calibration and include a 59 kΩ shunt for data verification or simulation purposes.
Key Product Differences
Variants are differentiated by model family, capacity range, and inside diameter selection:
- LC8313 Series (3.13" OD): Available in capacities from 1 K lb to 7.5 K lb with IDs of 2.00" or 2.13".
- LC8400 Series (4.00" OD): Offers the broadest capacity range, spanning 1 K lb to 200 K lb. The physical height increases for capacities ≥100K. IDs of 2.00" or 2.13" are available.
- LC8450 Series (4.50" OD): Supports capacities from 1 K lb to 50 K lb with larger inside diameters of 3.00" or 3.13".
The model number format follows the pattern [Model]-[ID Code]-[Capacity], where the ID code corresponds to the specific hole size (e.g., LC8450-300-1K for a 3.00" ID, 1 K lb capacity). Metric configurations are available upon consultation with engineering.
PDFとマニュアル
LC831384008450"" -200213300313-1K3K5K7.5K10K25K50K100K200K