検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

OM-CP-RHTEMP1000IS-Lgr

本質安全防爆温湿度データロガー

  • Certified Intrinsically Safe
  • SGS Certified to meet FM3600 and FM3610 standards
  • Software Battery Life Indicator
  • NIST Certified
OM-CP-RHTEMP1000IS-Lgr
販売元 ¥ 109,737
本質安全防爆温湿度データロガー OM-CP-RHTEMP1000IS-Lgr OM-CP-RHTEMP1000IS-Lgr
loading all models
製品の概要
  • 추가 기능 1 SGS, FM, 본질 안전형
  • 배터리 수명 최대 2년까지입니다
  • 배터리 크기 및 종류 알칼리성
  • 보정 소프트웨어를 통한 디지털 보정
  • 데이터 인터페이스 USB
  • 데이터 인터페이스 주의사항 OM-CP-IFC400 또는 OM-CP-IFC406
  • 재료 316 스테인리스 스틸/레이델
  • 측정 유형 습도, 온도
  • 메모리 32767
  • 측정 횟수 2
  • 작동 온도, 최대 80 °C
  • 최소 작동 온도 -40 °C
  • 실시간 기록 PC와 함께 사용하여 실시간으로 데이터를 모니터링하고 기록할 수 있습니다
  • 상대습도 정확도 ± 3 % 습후 수비
  • 상대습도 정확도 사양 참고 25 %RH ~ 75 %RH +20 °C ~ +40 °C (68 °F ~ 104 °F) 히스테리시스 오차 1 % 일반, 최대 3 %
  • 최대 상대 습도 1
  • 최소 상대 습도 0
  • 상대 습도 해상도 0.001
  • 상대습도 센서 유형 정전용량 고분자
  • 샘플, 최대 32768
  • 샘플링 속도 1 Hz (1초 업데이트 1회)
  • 샘플링 속도 사양 참고 1초마다 1회에서 24시간마다 1회까지.
  • 시리즈 ID OM-CP-RHTEMP1000IS-Lgr
  • 소프트웨어 호환성 Windows XP SP3/7/8/10
  • 시작 모드 조절 가능한 지연 시작
  • 전원 유형 배터리
  • 최대 측정 온도 80 °C
  • 최소 측정 온도 -40 °C
  • 온도 측정 사양 참고 -40°C ~ +80°C(-40 °F ~ +176°F)
  • 온도 해상도 0.01 °C
  • 온도 센서 유형 RTD
  • 온도 센서 유형 사양 참고 저항 온도 감지기(RTD)
  • 시간 정확성 16초/월
  • 무게 68 g

Supported Applications

The OM-CP-RHTEMP1000IS-A2 is an intrinsically safe temperature and humidity data logger designed for hazardous locations. Its 316 stainless steel enclosure, fast response and intrinsically safe certification make it suited to demanding, potentially explosive environments where both temperature and humidity must be documented.

  • EtO sterilization processes.
  • Environmental studies.
  • Hazardous locations certified as Class 1 Division 1 Group ABCD and Class 1 Division 2 Group ABCD, Temperature Class: T4A.

Operating Conditions & Performance

Temperature is measured by a Resistance Temperature Detector (RTD) and humidity by a Capacitive Polymer sensor over the following ranges:

  • Temperature: -40 °C to +80 °C (-40 °F to +176 °F)
  • Humidity: 0 %RH to 100 %RH (non-condensing)

Temperature resolution is 0.01 °C (0.018 °F) with a calibrated accuracy of ±0.5 °C (0 °C to ±50 °C), ±0.9 °F (32 °F to 122 °F). Humidity resolution is 0.1 %RH with a calibrated accuracy of ±3.0 %RH maximum. The specified accuracy range is 25 %RH to 75 %RH, +20 °C to +40 °C (68 °F to 104 °F) with a Hysteresis Error of 1 % Typical, 3 % Maximum.

The logger holds 32,768 Readings and records at a reading rate of 1 reading every second up to 1 reading every 24 hours, and may be used with a PC to monitor and record data in real time. It is powered by a Tadiran TL-2150 3.6V lithium battery, included and user replaceable in a non-hazardous location, with a battery life of 2 years typical at 15 minute reading rate. Data is date and time stamped in °C, °F, K, °R; %RH, mg/mL, Dew Point, and time accuracy is 16 seconds / month across -40 °C to 80 °C.

The enclosure is 316 Stainless Steel/Radel, measuring 1.67 in x 0.97 in dia. (42.3 mm x 24.6 mm dia.) and weighing 2.4 oz (68 g). The device is not rated for submersion; do not submerge this product to retain the IS rating. Approvals include CE, FM Class 3600, Rev. Jan 2018, FM Class 3610, Rev. Jan 2018, CAN/CSA-C22.2 No. 60079-0:15 and CAN/CSA-C22.2 No. 60079-11:14.

Configuration Options

This series is a single logger configuration, the OM-CP-RHTEMP1000IS-A2, combining an RTD temperature channel and a Capacitive Polymer humidity channel in one intrinsically safe stainless steel housing. Its capabilities and workflow options include:

  • Programmable recording: software programmable immediate or delay start, up to 24 months in advance, with digital calibration through software and calibration date automatically recorded within the device.
  • Process analysis: Sterilization Units and Pasteurization Units lethality equations are available within the software.
  • Data retrieval: the OM-CP-IFC400 docking station connects a single logger by USB cable, while the OM-CP-IFC406 is a 6 Port, Multiplexer docking station for reading multiple loggers.
  • Battery: the OM-CP-BAT113 is the replacement 3.6 V lithium battery, user replaceable in a non-hazardous location.

Key Product Differences

The series is ordered from the following model and accessories:

  • OM-CP-RHTEMP1000IS-A2 - Intrinsically Safe Temperature and Humidity Data Logger.
  • OM-CP-IFC400 - Docking station with USB cable.
  • OM-CP-IFC406 - 6 Port, Multiplexer docking station with USB cable.
  • OM-CP-BAT113 - Replacement 3.6 V lithium battery.

アクセサリー

accessories

Docking Station with USB Cable
€ 193,40 / each
3 在庫あり
6 Port, Multiplexer docking station with USB Cable
€ 894,51 / each
0 在庫あり

consumables

Replacement 3.6 V lithium battery for IS Loggers
€ 34,23 / each
1 在庫あり
ja-JP
ja_JP
設定を保存する