日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LR16
本質安全防爆レーダーレベルトランスミッター NPT接続付き
NPT 연결부가 있는 본질 안전 레이더 레벨 트랜스미터- 堅牢な316Lステンレス製アンテナおよびプロセスマウント
- プッシュボタンディスプレイまたはHARTコミュニケーターによる設定
- 26 GHzパルスレーダーは蒸気や結露の影響を受けない
- 12インチ(30cm)のデッドバンドによりタンク全体を利用可能
製品の概要
- 精度 ± 3 mm
- アンテナ直径 3 in
- アンテナ長 8.94 in
- 承認 CE、RoHS、CRN、FCC
- 承認事項 ATEX IIG Ex ia II C T6...T3 Ga IEC Ex ia IIC T6...T3 Ga CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G; (T6... T3); Class I Zone 0 AEx ia IIC (T6... T3) Ga & Zone 20 AEx ia IIIC (T76°C to T146°C) Da; Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- 棒グラフ スパンに対する割合
- ビーム角 12°
- コンフィグレーション プッシュボタン、HART 7
- デッドバンド 12インチ
- 表示およびインジケータ エコー信号曲線
- 表示単位 フィート, m
- 表示タイプ LCD
- 電気接続 1/2インチ NPT
- 電気出力 0~20 mA
- エンクロージャーの定格 IP67, NEMA タイプ 6
- 周波数 26 GHz
- 材料 316ステンレス鋼、ポリカーボネート
- 測定範囲(最小) 1 ft
- メモリ 不揮発性
- ワイヤ本数 2
- 動作圧力(最大) 150 psi
- 動作圧力(最小) -14.5 psi
- 消費電力 22.5 mA
- プローブタイプ 3インチホーンアンテナ
- プロセス接続サイズ 1 1/2インチ
- プロセス接続タイプ NPT オス・メス
- プロセス温度(最高) 150 °C
- プロセス温度(最低) -60 °C
- シリーズID LR16
- 信号フェイルセーフ 3.9 mA、20.5 mA、22 mA
- 信号反転 4~20 mA、20~4 mA
- 最大保管温度 80 °C
- 保管温度(最低) -40 °C
- 供給電圧 21.6から26.4Vdc
- 戦車タイプ どれでも
- 温度補償 自動
Supported Applications
The Omega EchoPro LR16 is an intrinsically safe, two-wire pulse radar level transmitter designed for continuous liquid level measurement. It operates by emitting a microwave pulse and measuring the time of flight to provide a proportional output signal.
Documented applications include:
- Petroleum storage
- Water processing
- Wastewater management
- Diluted chemical storage or process conditions
- Bulk storage and tanker trucks
- Reverse osmosis (RO) storage tanks
- Process tanks, waste sumps, and neutralization tanks
The sensor is suitable for challenging environments involving low or non-corrosive media, light surface foam, agitation, higher temperatures or pressures, condensation, or vapor. It functions in above-grade or below-grade tank installations.
Operating Conditions & Performance
The LR16 series operates at a frequency of 26 GHz with a measurement range from 12" to 98.4' (30cm to 30m). The system includes a dead band of 12" (30cm) and maintains an accuracy of ± 3mm.
Performance is defined by the following environmental limits:
- Ambient Temperature: F: -40° to 176°, C: -40° to 80°
- Process Temperature: F: -76° to 302°, C: -60° to 150°
- Storage Temperature: F: -40° to 176°, C: -40° to 80°
- Pressure Rating: -14.5 to 150 psi (-1 to 10 bar)
The unit features an IP67 enclosure rating and includes automatic temperature compensation.
Variations in Beam Angle
- -20 (2" horn): 18° beam angle, dimensions X: 2" (48mm), Y: 5.51" (140mm)
- -30 (3" horn): 12° beam angle, dimensions X: 3" (78mm), Y: 8.94" (227mm)
- -40 (4" horn): 8° beam angle, dimensions X: 4" (98mm), Y: 11.34" (288mm)
Configuration Options
The LR16 series is configurable across antenna sizes, output signals, and mounting options to accommodate specific installation requirements.
Sensor Elements & Antennas
- Horn Sizes: 2" (48mm), 3" (78mm), or 4" (98mm)
- Antenna Material: 316L stainless steel
Outputs & Configuration
- Analog Output: 4-20 mA, two-wire (configurable for 20-4 mA inversion)
- Digital Protocol: HART 7 compatible
- Fail-Safe Options: 3.9 mA, 20.5 mA, or 22 mA
- Configuration Interface: Integral push button display module (LCD dot matrix) or external HART communicator
Housing & Connections
- Enclosure Material: 316L stainless steel with silicone gasket and polycarbonate window
- Process Connection: Standard 1-1/2" NPT
- Electrical Connection: 1/2" NPT connector
Approvals & Certifications
The series carries the following certifications for hazardous locations and compliance:
- ATEX II 1G Ex ia II C T6...T3 Ga
- IECEx ia IIC T6...T3 Ga
- CSA Class I, Div 1, Groups A, B, C & D; Class II, Div 1, Groups E, F & G (T6...T3)
- Class I Zone 0 AEx ia IIC (T76°C to T146°C) Da
- Ex ia IIC (T6...T3) Ga & Ex ia IIIC (T76°C to T146°C) Ga
- FCC, CE, CRN, RoHS compliant
Key Product Differences
The primary variation within the LR16 series is defined by antenna size and beam angle. The 2" horn (-20 code) provides an 18° beam angle suitable for general applications. For tighter focusing, the 3" horn (-30 code) offers a 12° beam angle, while the 4" horn (-40 code) delivers an 8° beam angle.
Mounting flexibility is achieved through optional accessories rather than integral housing changes. The standard unit features a 1-1/2" NPT process connection; however, ANSI flanges (3", 4", or 6") and reducer bushings are available as separate orderable items to adapt the sensor for different tank nozzles.
Output configuration allows selection between direct level indication (4-20 mA) or inverted output (20-4 mA). The integral display module provides local visualization of feet, meters, percent of span, and echo signal curves without requiring an external communicator.