検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

iNET-100-200-Series

instruNetシリーズ 直接センサーからデータ取得まで

instruNet 시리즈 직접 센서에서 데이터 수집까지
  • Windowsベースのコンピュータ向け高精度データ取得
  • 16シングルエンド/8差動14ビットアナログ入力、8アナログ出力および8デジタルI/O
  • iNET-240 USB 2.0コントローラカード
  • RTD、熱電対、電圧、サーミスタ、ブリッジおよびひずみゲージセンサーへの直接接続
iNET-100-200-Series
販売元 ¥ 334,054
instruNet 시리즈 직접 센서에서 데이터 수집까지 iNET-100-200-Series iNET-100-200-Series
loading all models
製品の概要
  • 精度 ± 0.4 %
  • アナログI/Oノート アナログ入力:16シングルエンド/8差動、分解能:14ビット、システムスループット:166Kサンプル/秒、A/D変換時間:最小4µs、信号対雑音比:78dB、直線性:差動±1.5LSB;積分±2LSB、入力過電圧保護:±15V、入力インピーダンス:>22MΩ、3pF、コモンモード電圧:最小±5V(CMR±80dB)、ゲインおよびオフセットドリフト:5V FSRの±5ppm/°C;オフセットは自己校正により0に設定 デジタルI/O数:8非ラッチ入力および8ラッチ出力、8双方向スクリュ端子にて
  • コモンモード電圧 ±5V
  • 変換率 4 µs 最小
  • デジタル入力 デジタル:低 = –12 から 1.0 Vdc(VIL)
  • デジタル出力 デジタル: VOH = 2 V 最小〜5 V 最大、IOH = -0.5 mA 最大、IOL = 500 mA 最大、VO = 1.7 V、IOL = 50 mA 最大、VO = 0.7 V
  • ドリフト ゲインおよびオフセット:入力:±5 ppm/℃(5Vフルスケールに対して);オフセットは0に自動校正、出力:±10 ppm/℃(5Vフルスケールに対して)および±5 µV/℃のオフセットドリフト
  • 高さ 45.72 mm
  • インピーダンス入力 >22 MΩ、3pF
  • キャパシタンス入力 3 pf
  • 入力タイプ 電圧、熱電対、RTD、サーミスタ、デジタル
  • 長さ 228.6 mm
  • 直線性 差動 ±1.5 LSB;積分 ±2 LSB
  • チャンネル数、入力 アナログ:8 DIFF/16 SE、デジタル:8
  • チャンネル数と出力 アナログ:8、デジタル:8
  • 出力解像度 アナログ:8ビット
  • 出力安定時間 4 µs(±2 LSB、±5 Vステップまで)
  • 出力信号 電圧、デジタル
  • 保護 入力保護:±15V
  • サンプリングレート 166 kHz (166,000 回/秒)
  • センサータイプ 熱電対タイプ J、K、T、E、R、S、B、N、C、G、D
  • シリーズID iNET-100-200-Series
  • 信号/雑音比 78 dB
  • 電圧測定範囲 ±5V、±0.6V、±80 mV、±10 mV
  • 幅 106.68 mm

Supported Applications

The Omega instruNet Series is a direct sensor-to-data acquisition system designed for high-accuracy data collection on Windows computers. The architecture places analog electronics in electrically quiet external boxes near sensors while retaining digital processing within the PC, supporting laboratory and factory equipment interfacing. The series supports a wide range of measurement types including thermocouples (J, K, T, E, R, S, B, N, C, D, G), RTDs (100 Ω, 500 Ω, 1000 Ω), thermistors, strain gages, voltage, current, and resistance sources. Applications include real-time monitoring, data logging, and analysis via instruNet World software or optional drivers for LabVIEW.

Operating Conditions & Performance

The system provides 16 single-ended/8 differential analog inputs with 14-bit resolution and a minimum A/D conversion time of 4 μs. System throughput reaches up to 166K samples/s, though multiple boxes on a network may degrade this maximum rate. Voltage input ranges include ±5V (±700 μV accuracy), ±0.6V (±75 μV), ±80 mV* (±15 μV), and ±10 mV* (±10 μV). Thermocouple accuracies vary by type and range; for example, Type K offers ±0.8°C from -200 to -50°C and ±0.6°C from -50 to 1372°C. RTD accuracy ranges include ±0.37°C for a 100 Ω sensor (0 to 200°C) with a 1 kΩ shunt, improving to ±1.0°C at higher temperatures.

Analog outputs provide 8 channels with 8-bit resolution and an output range of ±5V @ 5 mA for iNET-100/100B models or ±5V @ 15 mA for the iNET-100HC. Digital I/O consists of 8 non-latching inputs and 8 latching outputs at bidirectional screw terminals, with input levels from -200 μA to +3.2V min.

Key Performance Metrics

  • Analog Inputs: 16 single-ended/8 differential; Input Impedance >22 MΩ, 3pf; Common-Mode Voltage ±5V min (CMR ±80 dB).
  • Voltage Accuracy: Ranges from ±700 μV to ±10 μV depending on integration time and range.
  • Thermocouple Support: Includes J, K, T, E, R, S, B, N, C, D, G types with specific accuracy per temperature band.
  • Digital I/O Levels: Input V_ = 3.2V min to 12V max; Output I° = 50 mA max at 0.7V.

Configuration Options

The instruNet Series is configurable across multiple dimensions including sensor interface, controller type, and expansion options. The core network devices include the iNET-100 (screw terminals), iNET-100B (adds 16 BNC connectors for voltage inputs), and iNET-100HC (provides 15 mA excitation current per channel). Controllers enable connection to desktop or laptop PCs via USB 2.0 (iNET-240) or PCI-Bus (iNET-200, controls up to 8 boxes).

Available Options and Accessories

  • Power Solutions: iNET-312-8 (USA plug) or iNET-312-8EU (Euro plug); required for networks exceeding two standard boxes.
  • Isolation & Mounting: iNET-330 Optical Isolator; iNET-340 DIN Rail Mounting Brackets.
  • Cabling: Network cables available in 10FT, 25FT, 50FT, and 100FT lengths (up to 30.5 m).
  • Software & Drivers: iNET-IWPLUS license; LabVIEW drivers (versions 4–6 supported); DASYLab compatibility.
  • Precision Shunts: OMX-R250, OMX-R1K, OMX-R4.7K, OMX-R47K for current measurement applications.

Network Expansion

A single network can extend up to 304.8 m (1000') and support up to 128 analog inputs, 64 analog outputs, and 64 digital I/O lines when multiple boxes are daisy-chained. Each controller operates independently, allowing installation of as many controllers as space permits.

Key Product Differences

The series distinguishes models by interface type, drive capability, and connectivity method:

  • iNET-100 vs. iNET-100B: The base model uses screw terminals; the B variant adds 16 additional BNC connectors for voltage inputs.
  • iNET-100HC: Identical to iNET-100 but provides higher drive capability (15 mA excitation current per channel) compared to standard models.
  • Controller Types: The iNET-240 uses USB 2.0 for Windows XP/Vista/7 systems; the iNET-200 is a PCI-Bus card compatible with similar OS versions and supports up to eight network devices per controller.
ja-JP
ja_JP
設定を保存する