日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-OLS
赤外線光学レベルスイッチ - LED、可動部なし、クイックレスポンス
적외선 광학 레벨 스위치 - LED, 무동작 부품, 빠른 응답- コンパクトスイッチは各設置に対して水平または垂直に迅速に取り付け可能
- 明るい赤と緑のLEDが液体の有無を示し、正確なローカル表示を実現
- 可動部品を使用せずに迅速な応答を提供し、安定したプロセス制御を実現
- 316ステンレス鋼、ポリスルホン、PFAの3つのオプション材料で用途の柔軟性を提供
製品の概要
- 応用例 製薬
- 電気接続 ケーブル
- 対応媒体 適合する液体
- 取付方向 なし
- 出力信号 電流、電圧
- 消費電力 35 mA max
- 圧力タイプ ゲージ
- プロセス接続サイズ 1/2インチ
- プロセス接続タイプ NPT オス
- 繰り返し精度 ±0.02インチ
- シリーズID Series-OLS
- 電源タイプ DC
- 供給電圧 10から28Vdc
- スイッチタイプ NPN オープンコレクタ
- 重量 3 oz
- 線径 22 AWG
Supported Applications
The Dwyer Series OLS Optitrol® Optical Level Switches are compact, rugged devices designed to indicate the presence or absence of liquid using infrared light reflected through a prism lens. The series is specified for noncoating compatible liquids and provides rapid response with no moving parts for stable process control.
Key operational features include:
- Detection via an infrared LED and photo-transistor assembly
- Bright red and green LEDs indicating liquid presence or absence
- No minimum specific gravity requirement
Operating Conditions & Performance
The Series OLS operates within defined temperature, pressure, and environmental limits that vary by model. The switches are rated for a power supply of 10 to 28 VDC with a maximum current consumption of 35 mA.
- Process Temperature: Models OLS-10 and OLS-11: 200°F (93.3°C); Model OLS-12: 120°F (48.9°C)
- Ambient Temperature: Models OLS-10 and OLS-11: 175°F (79.4°C); Model OLS-12: 120°F (48.9°C)
- Pressure Limit: Models OLS-11 and OLS-12: 200 psig (13.8 bar); Model OLS-10: 1000 psig (69 bar)
- Repeatability: ±0.02" (0.5 mm)
The unit weighs 3 oz (0.085 kg). Installation requires the prism surface to be at least 2" from any reflective surfaces and away from infrared light sources.
Configuration Options
The series is available in three material configurations tailored for different service environments, all featuring a standard process connection of 1/2" male NPT. Electrical connections are provided via a 38" (965.2 mm) 3 conductor cable with 22 AWG wire.
Model Configurations
- OLS-10: Wetted materials of 316 SS/Polysulfone; rated for pressures up to 1000 psig (69 bar).
- OLS-11: Wetted material of Polysulfone; rated for pressures up to 200 psig (13.8 bar).
- OLS-12: Wetted material of PFA; rated for pressures up to 200 psig (13.8 bar) and temperatures up to 120°F (48.9°C).
Output & Mounting
- Switch Type: NPN open collector with Vout (max) = 28 VDC, Isink (max) = 100 mA.
- Mounting Orientation: Horizontal or up to 45° from horizontal only. Note: While the data sheet states "Can be mounted in any position," the instruction manual explicitly restricts mounting to "Horizontal or up to 45° from horizontal ONLY."
Key Product Differences
The primary distinction between Series OLS models is the wetted material composition and the resulting pressure/temperature ratings. The OLS-10 utilizes a stainless steel construction for high-pressure applications, whereas the OLS-11 and OLS-12 utilize plastic materials (Polysulfone and PFA) suitable for lower pressures up to 200 psig.
Model selection is driven by media compatibility requirements: Polysulfone or PFA may be selected based on chemical resistance needs, while the 316 SS/Polysulfone combination in the OLS-10 supports higher pressure service. All models share identical electrical specifications and output signal characteristics.