検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-AQH-20

室内空気質計 – CO₂、温度、湿度% バックライト付きLCD

  • 二酸化炭素、温度、湿度のオールインワンユニット
  • 暗所での視認性を高める大型バックライトLCD
  • 危険な状態を音で知らせるユーザー設定可能なアラーム
Model-AQH-20
販売元 ¥ 81,841
室内空気質計 – CO₂、温度、湿度% バックライト付きLCD Model-AQH-20 Model-AQH-20
loading all models
製品の概要
  • 精度の詳細 温度精度:±0.9 °F;CO2精度:±30PPM;湿度精度:±3%
  • バッテリーのサイズと種類 アルカリAA
  • CO2 測定範囲 0 ~ 2000 PPM
  • 表示に関する注意事項 温度/CO2は4桁、湿度は3桁。
  • 表示タイプ LCD
  • 湿度応答時間 10分未満
  • 動作湿度 0 ~ 95% RH
  • 動作温度(最高) 122 °F
  • 動作温度(最低) 32 °F
  • プロセス温度(最高) 140 °F
  • プロセス温度(最低) 14 °F
  • 相対湿度 0~99.9%
  • 解決注記 温度分解能:0.1 °F;CO2分解能:1 PPM;湿度分解能:0.1%
  • 応答時間 温度応答時間 < 2分; CO2 応答時間 < 30秒
  • センサータイプ CO2 センサー:非分散型赤外線
  • シリーズID Model-AQH-20
  • 電源注記 (4) 1.5 V AA アルカリ電池、付属、ユーザー交換可能
  • 電源タイプ バッテリー
  • ウォームアップ時間 30 秒
  • 重量 6.76 oz

Supported Applications

The Model AQH-20 Handheld Indoor Air Quality Meter reduces the number of instruments a contractor has to carry by measuring carbon dioxide concentration, air temperature, and relative humidity in a single device. A large backlit LCD shows all three parameters simultaneously, and the meter can display dew point or wet bulb temperature in place of ambient temperature.

  • Indoor air quality checks, reading CO2, temperature, and humidity together during walk-throughs.
  • HVAC and ventilation troubleshooting, with user-selectable engineering units and minimum, maximum, and average readings.
  • Spot measurements and logging comparisons, aided by a hold function and an audible alarm.

For accurate readings, the CO2 sensor should be calibrated in fresh outdoor air that is well ventilated and in good weather conditions; it should not be calibrated in areas with high CO2 concentrations such as crowded areas. When the meter experiences a large variation in environment, it may take 30 seconds to respond.

Operating Conditions & Performance

The AQH-20 uses a non-dispersive infrared (NDIR) CO2 sensor alongside temperature and humidity sensing:

  • CO2: range 0 to 2000 ppm; accuracy ±30 ppm ±5% of reading; resolution 1 ppm.
  • Temperature: range 14 to 140°F (-10 to 60°C); accuracy ±0.9°F (±0.6°C); resolution 0.1°F (0.1°C).
  • Relative humidity: range 0.0 to 99.9% RH; accuracy ±3% RH (10 to 90%), ±5% (0.0 to 9.9% or 90 to 99.9%); resolution 0.1% RH.
  • Response time: CO2 < 30 seconds; temperature < 2 minutes; humidity <10 minutes.

The display shows four digits for temperature/CO2 and three digits for humidity, and warm-up time is 30 seconds. The meter operates from 32 to 122°F (0 to 50°C) at 0 to 95% RH (non-condensing) and is powered by four 1.5 V AA alkaline batteries, included and user replaceable. It weighs 6.76 oz (200 g) and carries CE approval.

Configuration Options

The AQH-20 is a single-model meter, so every unit provides the same three-parameter measurement set — CO2 from 0 to 2000 ppm, temperature from 14 to 140°F (-10 to 60°C), and humidity from 0.0 to 99.9% RH — along with the same backlit LCD, NDIR CO2 sensor, and selectable dew-point/wet-bulb display. There are no separate capability tiers within the series.

Key Product Differences

The model chart lists a single instrument:

  • AQH-20 — CO2 range 0 to 2000 PPM, humidity range 0.0 to 99.9%, temperature range 14 to 140°F (-10 to 60°C).
ja-JP
ja_JP
設定を保存する