検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

TSW-TT

浸漬スナップアクション二金属温度スイッチ

  • 低電圧・低電流用途
  • 1/4 NPT 取付ねじ
  • 工場出荷時設定温度
  • 直接作用接点/最小ヒステリシス
TSW-TT
販売元 ¥ 11,607
浸漬スナップアクション二金属温度スイッチ TSW-TT TSW-TT
loading all models
製品の概要
  • 精度 ± 3 °C (± 5.4 °F)
  • ケーブル長 6 in
  • 電気接続 ワイヤリード
  • 電気定格 3 A @ 240 Vac
  • 動作湿度 0~80% RH
  • 動作温度(最高) 325 °F
  • 動作温度(最低) 0 °F
  • 圧力、最大 5000 psi
  • プローブ径 0.38 in
  • プローブ長 1 in
  • プロセス接続サイズ 1/4インチ
  • プロセス接続タイプ NPT オス
  • センサの材質 真鍮
  • シリーズID TSW-TT
  • 設定値タイプ 固定
  • 保存時の最大湿度 湿度 < 90%
  • スイッチ作動 上昇

Supported Applications

The Omega TSW-TT Series consists of bi-metal immersion temperature switches designed for low voltage and low current applications requiring economical temperature control. These devices activate with a rise in temperature, providing direct action switching suitable for environments rated NEMA 4 and NEMA 13.

Operating Conditions & Performance

The series offers factory-preset setpoints ranging from 4 to 149°C (40 to 300°F) with a tolerance of ±2.8°C (5°F). The maximum process temperature is rated at 163°C (325°F), and the switches are designed to withstand an external pressure up to 5000 psi. Electrical performance includes current ratings of 3 A @ 240 Vac or 2 A @ 24 Vdc for resistive loads.

Key physical specifications include:

  • Probe Diameter: ø9.5 mm (0.38 in)
  • Insertion Length: 25.4 mm (1")
  • Process Connection: ¼ NPT male
  • Electrical Connection: 152.4 mm (6") wire leads

Contact and Circuit Details

The switches feature gold diffused fine silver contacts with minimum hysteresis. The circuit form is available as SPST-NO or SPST-NC depending on the specific model selection.

Configuration Options

The TSW-TT series provides a comprehensive range of fixed setpoints to accommodate diverse control points within the 4°C (40°F) to 149°C (300°F) envelope. Variants are distinguished by their contact configuration and specific temperature activation point.

  • Contact Types: Models are available with Normally Open (NO) or Normally Closed (NC) contacts.
  • Setpoint Increments: Factory-preset options cover the full range in 10°F increments, starting at 4°C (40°F) and extending to 149°C (300°F).
  • Housing Rating: All variants are suitable for NEMA 4 and NEMA 13 environments.

Key Product Differences

The primary distinction between models in the TSW-TT series is the contact state (Normally Open vs. Normally Closed) and the specific setpoint temperature encoded in the model number. The ordering pattern follows TSW-TT-F<CONTACT_TYPE><SETPOINT>0R/WL.

  • Normally Open Models: Identified by the suffix "F3A" (e.g., TSW-TT-F3A-100R/WL for 4°C/40°F).
  • Normally Closed Models: Identified by the suffix "F3B" (e.g., TSW-TT-F3B-100R/WL for 4°C/40°F).

The series carries RoHS compliance and includes a 1 YEAR WARRANTY. Specific wetted materials, sheath material, or housing material are not specified in the source documentation.

ja-JP
ja_JP
設定を保存する