検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

i-Series-Strain

i-Seriesプログラム。通信機能付きストレイン/プロセスコントローラおよびメーター。

  • 高品質
  • 無料5年保証
  • 高精度 0.03% Rdg
  • ユーザーフレンドリー、簡単設定
i-Series-Strain
販売元 ¥ 83,516
i-Seriesプログラム。通信機能付きストレイン/プロセスコントローラおよびメーター。 i-Series-Strain i-Series-Strain
loading all models
製品の概要
  • 精度 ± 0.03 %
  • A/D変換方式 デュアルスロープ
  • CMRR 120 dB
  • デシマル選択 0,001, 0,01, 0,1, なし
  • デジタルフィルター プログラム可能
  • 表示に関する注意事項 4桁9セグメントLED 10.2 mm(0.40インチ);i32、i16、i16D、i8DV 21 mm(0.83インチ);i8 10.2 mm(0.40インチ)および21 mm(0.83インチ);i8DH プロセス変数、設定値、および温度単位用の赤、緑、アンバーのプログラム可能な色
  • 表示タイプ LED
  • 電気接続 ネジ端子
  • エンクロージャーの定格 IP65, NEMA タイプ 4, NEMA タイプ 4X
  • インピーダンス入力 100 mVで10 MΩ;1 Vまたは10 Vdcで1 MΩ
  • 入力範囲注記 0~100 mVdc、-100 mVdc~1 Vdc、0~10 Vdc、0~20 mA
  • 入力タイプ 単端、電圧、電流、ひずみ、温度
  • 絶縁 入力/出力への電源:1分間試験で2300 Vac 低電圧電源オプションの場合:1分間試験で1500 Vac リレー/SSR出力への電源:1分間試験で2300 Vac リレー/SSRからリレー/SSR出力への電源:1分間試験で2300 Vac RS232/485から入力/出力への電源:1分間試験で500 Vac
  • 長さ 5 in
  • 線形化ポイント 最大10
  • 測定タイプ 電流、ひずみ、温度、電圧
  • NMRR 60 dB
  • 桁数 4
  • 入力数 5
  • オフセット調整 -1999 ~ 9999
  • 動作温度(最高) 55 °C
  • 動作温度(最低) 0 °C
  • 極性 単極
  • 読み取りレート 3/秒
  • 相対湿度 90% RH 非結露
  • 抵抗値の分解能 10/1µV
  • RTD タイプ 100/500/1000 Ω Pt
  • サンプリングレート 3 Hz (3 更新/秒)
  • センサー励起 24 Vdc @ 25 mA(低消費電力オプションには対応していません)
  • シリーズID i-Series-Strain
  • セットポイント調整 メニュー設定可能
  • ステップ応答 99.9%に対して0.7秒
  • 温度安定性 50 ppm/°C
  • 熱電対タイプ J、K、T、E、N、R、S、B、C、L
  • 重量 127 g

Supported Applications

The Omega i-Series is a family of microprocessor-based instruments designed for strain and process measurement. The series includes digital panel meters (DPI) and single loop PID controllers (CNI) configured with universal inputs to accept signals from load cells, pressure transducers, and strain gage sensors. These units also support standard temperature and process voltage/current ranges.

Key applications documented for the i-Series include:

  • Strain Measurement: Monitoring of load cells, pressure transducers, and strain gages using ratiometric mode.
  • Process Control: Heat/cool control, alarm monitoring, and ramp-to-setpoint operations for temperature and process variables.

Operating Conditions & Performance

The i-Series operates within an ambient temperature range of 0 to 55°C (32 to 131°F) with a humidity rating of up to 90% RH non-condensing. The instruments feature front bezel ratings of NEMA 4 (IP65) or NEMA 1/Type 1, depending on the configuration.

Performance specifications for strain and process inputs include:

  • Accuracy: ±0.03% rdg ±0.03% range for process and strain measurements.
  • Resolution: 10/1 μV for strain/process applications; 1°/0.1° or 10 μV for temperature/process inputs.
  • Response Time: 0.7 sec for 99.9% of the final value.

The series supports built-in excitation options including 24 Vdc @ 25 mA, 5 Vdc @ 40 mA, and 10 Vdc @ 60 mA to power connected sensors directly.

Configuration Options

The i-Series is offered in three true DIN sizes: 1/8 (i/8), 1/16 (i/16), and 1/32 (i/32). The series supports a wide range of configurable outputs, communications, and power options to meet specific installation needs.

Output Configurations:

  • 0.5 A SSR
  • Relay
  • DC pulse
  • Analog output (Isolated Analog Voltage and Current)
  • Ethernet with embedded Web server (-EIT suffix)
  • Isolated RS232 and RS485/422 serial communications (-C24, -C4EIT suffixes)

Housing & Display Options:

  • Dual display models (DH/DV series) for simultaneous process variable and setpoint viewing.
  • Compact depth options (-C suffix).
  • NEMA 4 (IP65) front bezel protection available on select sizes.

Power Supply:

  • AC Powered: 90 to 240 Vac ±10%, 50 to 400 Hz; or 110 to 375 Vdc equivalent voltage.
  • DC Powered (-DC suffix): 12 to 36 Vdc, 24 Vac (or 20 to 36 Vdc for dual display/Ethernet/analog output options).

Special Features:

  • Ratiometric mode specifically for strain gages.
  • Programmable digital filter.
  • Limited alarm versions (-AL suffix) and simplified menu control (-SM suffix).

Key Product Differences

The i-Series distinguishes between standard temperature/process models (CNI series) and strain-specific configurations. Strain gage inputs are identified by the "S" in the model number, such as CNIS32xx or CNIS8xx.

  • Model Numbering: The general format is CNI<Size><Model><Suffix>. For example, a 1/32 DIN strain meter with relay outputs might be designated CNIS3244. Strain models (CNIS) are distinct from standard temperature/process controllers.
  • Suffix Constraints: The "-SM" simplified menu option is not available on CNIS strain models. Ethernet options (-EIT, -C4EIT) are unavailable for CNI8A, CNI8C, CNI16, CNI16A, and CNI32 controllers.
  • Power & Excitation: The "-DC", "-C24", and "-C4EIT" options are not available with built-in excitation. Analog output is incompatible with the "-AL" limit alarm version.
CNIS3282345234-C24-EIT-C4EIT-DC
サイズ
制御出力 #1
制御出力 #2
シリアル通信
電源
"
ja-JP
ja_JP
設定を保存する