검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

HHF-SD1-Meter

リアルタイムデータロガー付きホットワイヤ風速計

  • スリムプローブ、グリルおよびディフューザーに最適
  • タイプKまたはJ熱電対入力
  • リアルタイムSDメモリーカードデータロガー
  • 緑色バックライト付きLCD
HHF-SD1-Meter
시작 ¥ 144,264
リアルタイムデータロガー付きホットワイヤ風速計 HHF-SD1-Meter HHF-SD1-Meter
loading all models
제품 개요
  • 精度 ± 5 %
  • 精度の詳細 読み値の±(5% + a)またはフルスケールの±(1% + a)、いずれか大きい方
  • 空気速度、ミン 40 m/h
  • バッテリーのサイズと種類 アルカリAAA
  • データインターフェース RS232, RS485
  • 表示単位 °C, °F, ft/min, km/h, ノット, マイル/時, m/s
  • 表示タイプ バックライト付きLCD
  • フォームファクター ハンドヘルド
  • 高さ 8 in
  • 長さ 3 in
  • 動作湿度 0 ~ 85% RH
  • 動作温度(最高) 50 °C
  • 動作温度(最低) 0 °C
  • 消費電力 最大48 mA
  • プローブ径 0.47 in
  • プローブ長 37 in
  • プロセス温度(最高) 50 °C
  • プロセス温度(最低) 0 °C
  • 抵抗値の分解能 0.1°C (0.1°F)
  • サンプリング時間 1~3600秒
  • サンプリング時間注記 サンプリング時間: 自動: 1~3600秒 手動: データロガーボタンを1回押すと、データを1回保存します
  • シリーズID HHF-SD1-Meter
  • 電源注記 アルカリ電池またはヘビーデューティ電池
  • 温度精度 ± 0.5%
  • 温度センサーの種類 熱電対 K 型またはサーミスタ
  • 温度センサーの種類に関する注意事項 ガラスビーズサーミスタ
  • 重量 515 g
  • 幅 1.5 in

Supported Applications

The HHF-SD1 is a combination hot-wire and thermistor anemometer with a built-in real-time SD card data logger, measuring air velocity and air temperature simultaneously from a single telescoping probe. A hot wire senses air speed while a glass-bead thermistor reads air temperature, and an input socket accepts a Type K or J thermocouple for surface or immersion temperature measurement.

Because it logs directly to an SD memory card and produces Excel-compatible (.xls) files, the HHF-SD1 is well suited to environmental testing, balancing fans and motors, HVAC and duct airflow surveys, and clean-room or laboratory air-movement studies. A backlit LCD, automatic temperature compensation, and selectable velocity units make it easy to read in the field, and an optional RS232/USB interface with software allows data to be pulled onto a PC.

The meter comes complete with a hard carrying case, a Type K thermocouple, the telescoping probe, an SD card, and an operator's manual. It is not designed for and should not be used in human applications.

Operating Conditions & Performance

Air velocity is measured over dual sub-ranges of 0.2 to 5 m/s and 5.1 to 20 m/s (equivalent to 40 to 3940 ft/min), with velocity accuracy of ±(5% + a) reading or ±(1% + a) full scale, whichever is greater. Air temperature is measured from 0 to 50°C (32 to 122°F) at 0.1°C (0.1°F) resolution. The telescoping probe is 12 mm (0.47") in diameter and extends from 280 to 940 mm (11 to 37").

Data-logging and interface behavior includes:

  • Sampling time (Auto): 1 to 3600 seconds, with the display updating at 1 second
  • Memory: SD memory card, storing Excel-compatible logs
  • Interface: RS232/USB (with optional cable and software)
  • Display: 52 x 38 mm (2.05 x 1.5") LCD with switchable green backlight

The unit runs on 6 'AAA' alkaline or heavy-duty batteries (included) or an optional 9V power adaptor, drawing 15 mA DC without the SD card or backlight and 36 mA with all functions active. It operates from 0 to 50°C (32 to 122°F) at less than 85% RH, weighs 515 g (1.13 lb), and measures 203 L x 76 W x 38 mm D (8 x 3 x 1.50"). The instrument is manufactured to ISO 9001 quality standards.

Configuration Options

Offered as a single model, the HHF-SD1's flexibility comes from its selectable measurement scales and its thermocouple input. Velocity can be displayed in m/s, km/h, ft/min, knots, or mile/hr, and each scale uses a fine/coarse dual-range resolution — for example 0.01 m/s at low speed and 0.1 m/s at higher speed. Temperature reads in °C or °F with automatic temperature compensation.

When a thermocouple is fitted (sold separately), the measuring capability depends on the sensor type. A Type K sensor covers -50 to 1300°C (-58 to 2372°F), while a Type J sensor covers -50 to 1200°C (-58 to 2192°F); both deliver 0.1°C resolution and ±(0.4% + 0.5°C) accuracy over their primary spans, easing to ±(0.4% + 1°C) at the coldest sub-range.

Key Product Differences

The series consists of one meter supported by a full set of replacement and interface accessories:

  • HHF-SD1 — Data-logging airflow meter with SD card, hot-wire type
  • HHF-SD1-RP — Replacement hot wire probe
  • SW-U101-WIN — Software for data logging from meters, with USB and RS232 cables
  • HC-SD — Replacement hard carrying case
  • SC-SD — Soft carrying case
  • ADAPTER-SD — AC adaptor
  • USB-SD — Spare USB cable (SW-U101-WIN software required)
  • RS232-SD — Spare RS232 cable (SW-U101-WIN software required)
  • 2GB-SD — Spare 2 GB SD memory card

Type K and Type J thermocouples are ordered separately to match the temperature task.

액세서리

accessories

Replacement hard carrying case
78,991원 / 개당
3 재고 있음
So ft carrying case
39,863원 / 개당
7 재고 있음
ko-KR
ja_JP
설정 저장