検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

HX15-Srs-Sig-Cond

高温相対湿度温度トランスミッター(プローブ付き)

  • リモートステンレススチールプローブ(付属)
  • 64 mm(2.5インチ)長 壁取付けプローブ
  • 216 mm(8.5インチ)長 ダクト取付けプローブ
  • 2% RH、0.5 °C 精度
HX15-Srs-Sig-Cond
販売元 ¥ 179,464
高温相対湿度温度トランスミッター(プローブ付き) HX15-Srs-Sig-Cond HX15-Srs-Sig-Cond
loading all models
製品の概要
  • 精度 ± 0.5 °C (± 0.9 °F)
  • 校正オプション トリムポテンショメータ
  • 表示タイプ 該当なし
  • 電気出力 0~20 mA
  • エンクロージャーの定格 IP66
  • 長さ 120 mm
  • 材料、湿潤 ABS
  • 測定タイプ 温度、湿度
  • 動作温度(最高) 180 °C
  • 動作温度(最低) -40 °C
  • 出力詳細 0~100% RHに対して4~20 mA、-40~180°C(-40~356°F)に対して4~20 mA
  • プローブ径 16 mm
  • 相対湿度 ± 2% RH
  • センサータイプ RH、薄型ポリマーコンデンサ、温度、1000 Ω プラチナ RTD
  • シリーズID HX15-Srs-Sig-Cond
  • 電源タイプ DC
  • 供給電圧 7から30Vdc
  • 温度測定(最大) 70 °C
  • 温度測定範囲(最小) -20 °C
  • 時間定数 30秒、90%応答、1ms移動空気
  • 幅 80 mm

Supported Applications

The Omega HX15 Series consists of high-temperature relative humidity and temperature transmitters designed for remote sensing in HVAC ducts or wall-mounted installations. The series features stainless steel probes equipped with a thin film polymer capacitor for humidity measurement and a 1000 Ω platinum RTD for temperature monitoring.

Documented configurations include:

  • HX15-W: Wall-mounted RH/temp transmitter with a 79 mm (3") probe and metal wall mounting clip.
  • HX15-D: Duct-mounted RH/temp transmitter with a 229 mm (9") probe, removable adjustable duct flange, o-ring, screws, and gasket.

Probes are connected to the electronics enclosure via a 1 m (40") PFA cable. The series is RoHS 2 Compliant.

Operating Conditions & Performance

The HX15 Series operates across an extended temperature range, with probe process temperatures rated from -40 to 180°C (-40 to 356°F). The electronics enclosure is designed for ambient operating conditions of -20 to 70°C (-4 to 158°F) and carries a NEMA 4X (IP66) rating.

Performance specifications are defined as follows:

  • Relative Humidity Accuracy: ±2% RH, 3% to 95% @ 25°C (77°F); ±0.05% RH/°C for -40 to 150°C (-40 to 302°F).
  • Temperature Accuracy: ±0.5°C (1°F), -40 to 180°C (-40 to 356°F).
  • Response Time (RH): 30 s, 90% response, in 1 ms moving air.
  • Response Time (Temperature): 4 s, 60% response, in 1 ms moving air.

The transmitters require a power supply of 7 to 30 Vdc and provide dual output signals: 4 to 20 mA for 0 to 100% RH and 4 to 20 mA for -40 to 180°C (-40 to 356°F).

Configuration Options

The series offers configurable mounting options tailored to specific installation geometries:

  • Housing Material: ABS enclosure.
  • Probe Dimensions: 16 mm diameter; overall length of 79 x 16 mm D (3 x 0.625") for wall mount and 229 x 16 mm D (9 x 0.625") for duct mount.
  • Electronics Dimensions: 55 H x 80 W x 120 mm L (2.16 x 3.14 x 4.72").
  • Sensor Elements: Thin polymer capacitor for RH; 1000 Ω Platinum RTD for temperature.
  • Wetted Materials: Stainless steel probe, thin polymer capacitor (RH sensor), and 1000 Ω Platinum RTD (temperature sensor).

An optional PSU-93 power supply is available, providing unregulated 16 to 23 Vdc at a maximum of 300 mA.

Key Product Differences

The HX15 Series distinguishes between two primary model configurations based on probe length and mounting hardware:

  • HX15-W (Wall-Mounted): Features a 79 mm (3") stem length with a metal wall mounting clip. The electronics enclosure is mounted directly to the wall.
  • HX15-D (Duct-Mounted): Features a longer 229 mm (9") probe designed for insertion into ductwork, utilizing a removable and adjustable duct flange assembly with an o-ring seal.

Both variants utilize the same sensor technology and output signal architecture. Probes are not field replaceable; replacement requires exchanging the entire unit or specific accessory parts such as wall mounting clips or duct flanges where available.

ja-JP
ja_JP
設定を保存する