검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

Series-DA-7035N

고감도 온도 스위치, 조절 가능한 데드밴드, 외부 조정 방식

高感度温度スイッチ、調整可能なデッドバンド、外部調整
  • 調整可能なデッドバンド
  • スナップアクションスイッチ標準装備
  • 不活性ガス作動型ブルドン管
  • 周囲温度の影響なし
  • バルブ高低差補正不要
  • °Fおよび°Cで校正された目盛盤を表示
  • オン/オフ表示あり
Series-DA-7035N
시작 ¥ 511,240
高感度温度スイッチ、調整可能なデッドバンド、外部調整 Series-DA-7035N Series-DA-7035N
loading all models
제품 개요
  • 追加機能 1 追加のオプションモデルについてはウェブページをご参照ください。例:スイッチタイプエンクロージャ、固定デッドバンド、長短異なるキャピラリ、アーマードキャピラ、ウェル、二段階、1/2˝または1˝接続サイズ、手動リセット
  • 毛細管の長さ 6 ft
  • 電気接続 1/2インチ NPT メスコンジット(ネジ付き端子台付き)
  • エンクロージャーの定格 汎用
  • 筐体の定格に関する注意事項 汎用。オプションで防雨型および防爆型
  • 材料、湿潤 304ステンレス鋼
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス, 適合する液体, 腐食性化学薬品/酸/アルカリ, 腐食性/有毒ガス
  • 動作温度(最高) 180 °F
  • 圧力限界 最大300 psiまで
  • プロセス接続サイズ 3/4インチ
  • プロセス接続タイプ NPT オス
  • 繰り返し精度 ± 1%
  • シリーズID Series-DA-7035N
  • セットポイント調整 セットポイントとリセットポイント用の外部ノブ
  • 設定値スケール 表示(°Fおよび°C)
  • スイッチノート SPDTスナップスイッチ。オプションでDPDTスナップおよび各種水銀スイッチ。10 A @ 120/240/480 Vac
  • スイッチ定格 10 A @ 120/240/480 Vac
  • スイッチタイプ SPDT スナップ
  • 重量 5 lb

Supported Applications

The Series DA-7035N Temperature Switch provides on/off control and alarm signaling for compatible liquids or gases across a broad span of process temperatures. It uses a bulb-and-capillary sensing element with an inert gas fill, and shares the same time-proven switching mechanism used in the Series DA pressure switches. The Bourdon tube movement gives the switch high sensitivity and long operating life.

Typical uses include process temperature limiting, equipment protection, and control loops where a mechanical bulb sensor must be located away from the switch enclosure. External knobs allow the set point and reset point to be adjusted without opening the housing, making the switch well suited to installations that require frequent field adjustment.

Operating Conditions & Performance

The switch is offered in nine temperature ranges spanning -60 to 30°F (-50 to 0°C) at the low end through 100 to 500°F (40 to 260°C) at the high end. Repeatability is ±1% FS, and the ambient temperature limit is 180°F (82°C). The process pressure limit is 300 psi (20.6 bar).

The bulb and its connection are constructed of 304 SS. Capillary tubing is supplied at a standard length of 6' (1.8 m); ranges 1N to 7N and 10N use copper capillary, while ranges 8N, 9N, and 11N use 304 SS capillary. Deadband is adjustable from the minimum listed for each range up to the full range, with an optional low fixed deadband available.

The standard output is an SPDT snap switch, with an optional DPDT snap switch and a variety of mercury switches available. The electrical rating is 10 A @ 120/240/480 VAC, wired through screw terminals. The conduit connection is a 7/8" (22.23 mm) hole for a 1/2" (12.7 mm) conduit hub, and the process connection is 3/4" male NPT, with other sizes available. The general purpose enclosure is standard, with optional weatherproof and explosion-proof enclosures.

Configuration Options

All variants share the DA-7035-153 base with an SPDT snap switch; they differ by the temperature range they cover, along with the associated maximum process temperature, minimum deadband, and minimum bulb insertion depth.

Lower ranges provide tighter minimum deadband values, while higher ranges require wider minimum deadband. Most ranges use a minimum insertion depth of 2-7/8" (73 mm), except the highest range covered by the 9N variant, which requires 4-7/8" (124 mm). Range selection also determines capillary material, with the higher ranges (8N, 9N, and 11N) using 304 SS capillary in place of copper.

Key Product Differences

The series comprises nine range-specific models built on the DA-7035-153 platform:

  • DA-7035-153-1N — -60 to 30°F (-50 to 0°C), maximum process temperature 150°F (65°C), minimum deadband 23°F (13°C), minimum insertion depth 2-7/8" (73 mm)
  • DA-7035-153-3N — 0 to 100°F (-18 to 40°C), maximum 240°F (115°C), minimum deadband 25°F (14°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-4N — 50 to 150°F (10 to 65°C), maximum 250°F (120°C), minimum deadband 25°F (14°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-5N — 100 to 200°F (40 to 95°C), maximum 300°F (150°C), minimum deadband 25°F (14°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-7N — 140 to 300°F (60 to 150°C), maximum 500°F (260°C), minimum deadband 41°F (23°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-8N — 250 to 415°F (120 to 215°C), maximum 550°F (290°C), minimum deadband 42°F (23°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-9N — 350 to 550°F (175 to 290°C), maximum 600°F (315°C), minimum deadband 50°F (28°C), insertion depth 4-7/8" (124 mm)
  • DA-7035-153-10N — 100 to 300°F (40 to 150°C), maximum 500°F (260°C), minimum deadband 50°F (28°C), insertion depth 2-7/8" (73 mm)
  • DA-7035-153-11N — 100 to 500°F (40 to 260°C), maximum 600°F (315°C), minimum deadband 100°F (56°C), insertion depth 2-7/8" (73 mm)