日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PX2300
高精度 湿式差圧トランスミッター
- 0.25% 精度
- NEMA-4/IP65 定格
- 湿潤腐食環境対応
- フィルターの圧力損失測定に最適
製品の概要
- 精度 ± 0.25 %
- 精度クラス 0.1% ~ 0.25%
- 精度の詳細 ±0.25% RSS FS(一定温度時)(直線性、再現性、ヒステリシスを含む)
- 追加機能 1 なし
- キャビティ容積 4.4 cc プラスポート、1.3 cc マイナスポート
- 対応メーター DP41-E、DP25B-E、DP-7700
- 補償温度、最大 65 °C
- 補償温度、最小 -1 °C
- 電気接続 ネジ端子(22.2 mm(0.875インチ)のコンジット開口部付き
- 電気出力 0~20 mA
- エンクロージャーの定格 IP65, NEMA タイプ 4
- ヒステリシス 0.10% FS
- ライン/静圧 250 psig
- 直線性誤差 ± 0.20%
- ループ抵抗(最大) 1000 Ω
- 動作温度(最高) 80 °C
- 動作温度(最低) -18 °C
- 出力信号 電流
- 圧力タイプ 差分
- プロセス接続サイズ 1/4インチ
- プロセス接続タイプ NPT メス
- 再現性誤差 ± 0.05 % FSO
- 応答時間 50 ms
- 応答時間の注記 50 ms(水)
- 検知素子 静電容量式
- シリーズID PX2300
- 電源注記 24 Vdc 公称 最大: 30 + 0.004 ×(ループ抵抗 Ω)Vdc 最小: 11 + 0.02 ×(ループ抵抗 Ω)Vdc
- 供給電圧 24 Vdc
- ゼロ点誤差に対する熱的影響、最大 <± 0.02% FS/ °F , <± 0.02% FS/ °F
- 重量 410 g
Supported Applications
The Omega PX2300 Series consists of high-output, low differential pressure transducers designed for wet-to-wet measurement. These units are compatible with most media ranging from dry air to corrosive liquids and are intended for industrial applications where dependability in harsh environments is required. The series is specifically noted for measuring pressure drop across filters and other process devices.
Important usage constraints include:
- Patient-connected prohibition: These products are not designed for use in, and should not be used for, patient-connected applications.
- High line pressure configuration: For differential pressure measurements at high line pressures (250 psig max.), it is recommended to install the sensor with a valve in each line plus a shunt valve across the high and low pressure ports.
Operating Conditions & Performance
The PX2300 Series delivers 4 to 20 mA output signals with an accuracy of ±0.25% RSS FS at constant temperature (includes linearity, repeatability, and hysteresis). The series supports a maximum line pressure rating of 250 psig.
Performance is influenced by environmental conditions:
- Ambient Temperature: -1 to 65°C (30 to 149°F).
- Process Temperature: -18 to 86°C (0 to 176°F).
- Response Time: 50 ms (water).
The unit accuracy is affected during vibration, shock, and acceleration conditions. Specific gravity effects on zero shift are documented in the series data: for ranges ±0.5 psid through 2.0 psig, the effect is -2% FS per g with the high pressure port face up and +2% FS per g face down; for all other ranges, the effect is -1% FS per g (face up) or +1% FS per g (face down).
Zero shift may occur when high differential pressure is applied. The shift can be as much as ±10% FS with overpressure applied to the low port and may be recovered by a positive overpressure.
Configuration Options
The series offers configurable measurement ranges in both uni-directional (DI) and bi-directional (BDI) formats. The available model numbers follow the pattern PX2300--.
- Uni-directional Ranges: 0 to 1 psid, 0 to 2 psid, 0 to 5 psid, 0 to 10 psid, 0 to 25 psid, 0 to 50 psid, and 0 to 100 psid.
- Bi-directional Ranges: ±0.5 psid, ±1 psid, ±2.5 psid, ±5 psid, ±10 psid, ±25 psid, and ±50 psid.
The transducers feature 1/4-18 NPT internal fittings for both high and low pressure ports. Wetted materials include 17-4 stainless steel, 300 series stainless steel, FKM (Viton), and silicone O-rings. The electronics are housed in a NEMA 4 (IP65) enclosure with an overall weight of 410 g (14.4 oz).
Electrical specifications include:
- Power Supply: 24 Vdc nominal; minimum and maximum limits depend on loop resistance.
- Load Resistance: 0 to 1000 Ω.
- Electrical Connection: Internal barrier strip with a 22.2 mm (0.875") conduit opening.
The series is calibrated with the diaphragm in the vertical position (pressure ports horizontal). For other orientations, zero adjustment is required. Metric thread adaptors and snubbers are available as options.
Key Product Differences
Variants within the PX2300 Series differ primarily by their measurement range directionality and span:
- Uni-directional (DI): Models such as PX2300-1DI, PX2300-5DI, etc., measure from 0 to a positive psid value.
- Bi-directional (BDI): Models such as PX2300-0.5BDI, PX2300-5BDI, etc., measure symmetric ranges around zero (e.g., -5 to 5 psid).
All variants share the same NEMA 4 (IP65) enclosure rating, wetted materials, and electrical output characteristics. The series carries CE approval and a 1 YEAR WARRANTY.