India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
LC103B
High Accuracy, Stainless Steel, S-Beam Load Cells
高精度、ステンレス鋼、S字型ロードセル- 容量は25~20,000ポンドおよび25~10,000キログラムで利用可能
- ステンレス鋼製、内部は接着剤で密封、耐油性、防水性、耐腐食性があり、あらゆる環境に適しています。
- S字型ビーム設計、引張および/または圧縮荷重に対応、設置が容易で、クレーンスケール、機械式変換スケール、ホッパースケールおよびその他の電子計量機器に適しています。
- 適合証明書およびフルスケール校正付き。
Product Overview
- 5点校正 0%, 100%
- 精度 クラス C3
- 校正オプション 2ポイントNIST
- デッドロード 0% FS
- エンクロージャーの定格 IP67
- 力タイプ 圧縮, 引張
- フルスケール振れ 0.0317 in
- ヒステリシス ± 0.035%
- 入力抵抗 430 ± 50 Ω
- 絶縁抵抗 ≥ 5000 MΩ
- 直線性 ± 0.035%
- ロードセルタイプ Sビーム
- 材料 ステンレス鋼
- ロードセル間隔数 (nLC) 3000
- 動作温度(最高) 65 °C
- 動作温度(最低) -35 °C
- 出力抵抗 351 ± 2 Ω
- 過負荷、最大 300% FS
- プロセス温度(最高) 40 °C
- プロセス温度(最低) -10 °C
- 最小LC検証間隔の比率 (Y = Emax/vmin) 10000
- 繰り返し精度 ± 0.035%
- 安全過負荷 150% FS
- シリーズID LC103B
- 最大保管温度 70 °C
- 保管温度(最低) -40 °C
- 電源注記 5~12 Vdc、最大18 Vdc
- 供給電圧 5から12Vdc
- ゼロ点/バランス誤差 ± 1%
Supported Applications
The Omega LC103B Series consists of high accuracy, compact stainless steel S-beam load cells designed for tension and/or compression loading. The product overview identifies suitability for crane scales, mechanical conversion scales, hopper scales, and other electronic weighing devices.
With Class C3 accuracy class certification under OIML R60 (for capacities greater than 25 lb), the series supports legal metrology applications where verified intervals are required. Each unit is provided with a certificate of conformance and full-scale calibration.
Operating Conditions & Performance
The LC103B Series operates within an ambient temperature range of -35 to 65 °C, with storage temperatures ranging from -40 to 70 °C. The compensated temperature range is specified as -10 to 40 °C.
- Accuracy: Class C3 accuracy class for capacities >25 lb; combined error of ±0.020 %FS.
- Hysteresis, Linearity, and Repeatability: Each specified at ±0.035 %.
- Overload Limits: Safe overload is 150 % FS; ultimate overload is 300 % FS.
- Ingress Protection: IP67 rating (according to EN 60529), providing oil-proof, waterproof, and anti-corrosion protection via adhesive sealing inside the stainless steel element.
The series supports measurement ranges from 25 lb to 20,000 lb and 25 kg to 10,000 kg. Output sensitivity is 3.0±0.008 mV/V for capacities greater than 25 lb, and 2.0±0.006 mV/V for capacities less than 25 lb.
Configuration Options
The LC103B Series is configurable across a wide envelope of capacities, dimensions, and thread connections to accommodate specific installation requirements.
Capacities:
- Imperial: 25 lb to 20,000 lb
- Metric: 25 kg to 10,000 kg
Housing and Connections:
- Material: Stainless steel element.
- Thread Options (Imperial): Ranges from 1/4-28UNF to 1 1/4-12UNF depending on capacity.
- Thread Options (Metric): Ranges from M8 to M30 x 2 depending on capacity.
- Cable: Shielded, 4-conductor cable with a standard length of 6 m and diameter of 5 mm. The shield is not connected to the element; jacket material is PVC.
Electrical Specifications:
- Excitation Voltage: Recommended 5 dc to 12 dc; maximum 18 dc.
- Input Resistance: 430 ± 60 Ω
- Output Resistance: 351 ± 2 Ω
- Insulation Resistance: ≥ 5000 MΩ (at 50 Vdc)
- Maximum Load Cell Intervals (nLC): 3000
Key Product Differences
The series includes distinct model families indicated by part number prefixes, corresponding to different capacity units and dimensional configurations:
- LC103B / LC113B: Imperial capacities (lbf) with dimensions provided in inches/mm. Thread sizes follow UNF standards.
- LCM103B / LCM113B: Metric capacities (kgf/kg) with thread sizes following metric standards (e.g., M8, M12, M20 x 1.5).
Dimensions vary by capacity range. For example, the overall length (L) ranges from 50.8 mm (2.0 in) for lower capacities up to 112.8 mm (4.4 in) for the 20,000 lb model. Fixation torque requirements are specified per thread size: Imperial threads range from 18 lbf.ft (1/4" UNF) to 1070 lbf.ft (1 1/8" UNF), while Metric threads range from 25 Nm (M8) to 1450 Nm (M30).
PDFs & Manuals