検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

SP-SURF-PROBES

ヘビーデューティー ハンドヘルド表面プローブ

  • 각 프로브는 6ft 리드선 끝에 SMP 미니어처 커넥터가 기본 장착되어 있습니다
  • J, K 및 E 교정의 6가지 견고한 프로브 스타일 제공
  • 1.8m(6ft) PFA 코팅 22 AWG 연선 리드선
  • 비드 와이어 프로브는 스테인리스 스틸 오버브레이드가 있는 글라스 온 글라스 절연 처리됨
SP-SURF-PROBES
販売元 ¥ 28,479
ヘビーデューティー ハンドヘルド表面プローブ SP-SURF-PROBES SP-SURF-PROBES
loading all models
製品の概要
  • 케이블 길이 6 ft
  • 색상 코드 표준 ANSI
  • 전기 연결 미니어처 수컷 열전쌍 커넥터
  • 단열 PFA
  • 오버브레이드 유형 스테인리스 스틸
  • 최소 공정 온도 0 °C
  • 시리즈 ID SP-SURF-PROBES
  • 보호관 재질 304 스테인리스 스틸
  • 온도 센서 유형 열전쌍
  • 와이어 게이지 22 AWG

Supported Applications

The Omega Heavy Duty Handheld Surface Probes (Series SP-SURF-PROBES) are temperature measurement probes designed for portable surface and general-purpose sensing. The series provides rugged handheld solutions featuring SMPW miniature connectors, intended for use with compatible thermocouple instruments.

Operating Conditions & Performance

The probe assembly utilizes 1.8 m (6') PFA-coated lead wires constructed from 22 AWG stranded conductors with glass-on-glass insulation and a stainless steel overbraid. The sensor tip diameter is specified as 3.2 mm (0.13") OD for the standard configurations.

Configuration Options

The series supports six distinct probe styles to address different access requirements, available in Type J, K, and E thermocouple calibrations:

  • Curved Surface Probe (SP-RL): Designed for curved surface applications.
  • General Purpose Probe (SP-GP): Standard handheld configuration.
  • Beaded Wire Probe (SP-BW): Exposed beaded wire element style.
  • Right Angle Probe (SP-RA): 90-degree orientation for specific access needs.
  • Surface Probe (SP-SP): Flat surface contact design.
  • Needle Probe (SP-NP): Fine-point configuration.

Optional configurations include extension handles with black anodized aluminum grips in 100, 300, or 600 mm (4, 12, or 24") lengths. Specific variants are available trimmed to a lead resistance of 3.85 Ω for use with analog pyrometers.

Key Product Differences

Model numbers follow the format SP-[PROBE_TYPE]-[CALIBRATION]-6, where [PROBE_TYPE] identifies the style (RL, GP, BW, RA, SP, NP) and [CALIBRATION] specifies J, K, or E. The standard connector is an SMPW Miniature Connector; for analog pyrometer compatibility, the '6' suffix in the model number changes to '3.85'. Extension handles are ordered separately as SP-EH-4 (100 mm), SP-EH-12 (300 mm), or SP-EH-24 (600 mm).

SP-RLSP-GPSP-BWSP-RASP-SPSP-NP-JKE-6-SMP-TK
プローブタイプ
熱電対の種類
プローブの長さ
コネクタ
"
ja-JP
ja_JP
設定を保存する