日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
7352-3-Series
重負荷型潜水用複合pHセンサー
- 強力なPPSボディ
- 低メンテナンス
- 短いまたは長い挿入長
- 任意の角度の設置
製品の概要
- 応用例 農業および水耕栽培の応用, 化学物質, 環境モニタリング, 飲食, 鉱業と冶金, 医薬品, 発電所とボイラー, パルプ・製紙産業, 水処理
- ケーブル長 4.6 m
- 直径 0 mm
- ドリフト 週<2 mV
- 電気接続 該当なし
- 筐体材質 PPS、PTFE、FKM、ガラス
- インピーダンス 150 MΩ
- 長さ 0 mm
- 測定タイプ pH
- pH測定範囲 0から14のpH
- 圧力、最大 100 psig, 100 psi
- 圧力(最小) 0 psig, 0 psi
- プレッシャーノート 0~100 psig または 0~150 psig(HT 高温バージョン) β 全範囲で±0.1%
- プロセス接続サイズ 3/4インチ
- プロセス接続タイプ NPT オス
- プロセス温度(最高) 80 °C
- プロセス温度(最低) 0 °C
- 参考セル ダブルジャンクション、KCl/AgCl、KNO3
- 応答時間 10秒で読み取りの95%
- センサータイプ 該当なし
- シリーズID 7352-3-Series
- ナトリウム誤差 0.1モルNa+イオン中でpH12.8において0.05未満のpH変動
- 温度注記 0~80°C(32~176°F)または0~110°C(32~230°F)(HT高温バージョン)
- ゼロ点/バランス誤差 7.0 ±0.2 pH
Supported Applications
The Omega PHE-7352 and PHE-7353 series are heavy-duty combination pH sensors designed for submersible applications. These electrodes feature a strong PPS body, sealed double junction construction resistant to electrode poisoning solutions (cyanide, ammonia, sulfide, heavy metals in appreciable concentrations), and a non-fouling patented Porous PTFE liquid junction.
Documented use cases include:
- Process water applications
- Waste water pipeline insertion
- Large diameter pipe insertion requiring greater penetration depth
- Installations at any angle orientation
Operating Conditions & Performance
The series operates within a pH range of 0 to 14 pH. Temperature capability depends on the specific version selected: standard models support 0 to 80°C (32 to 176°F), while the high temperature (-HT) version supports 0 to 110°C (32 to 230°F). Pressure ratings are 0 to 100 psig for standard versions and 0 to 150 psig for the -HT high temperature version.
Performance specifications include an accuracy of ±0.1% over full range, a response time of 95% of reading in 10 sec, and drift less than 2 mV per week. The sensor exhibits a sodium error of less than 0.05 pH in 0.1 Molar Na+ ion @ 12.8 pH and an impedance of 150 MΩ @ 25°C (77°F). Zero potential is specified as 7.0 pH ± 0.2 pH.
Wetted Materials
The wetted materials for the sensor include PPS, PTFE, FKM, and glass.
Configuration Options
The series is available in two primary insertion configurations to accommodate different pipeline penetration needs:
- PHE-7352: 152 mm (6.0") overall length with a 23 mm (0.9") insertion depth.
- PHE-7353: 152 mm (6.0") overall length with a 58.4 mm (2.30") insertion depth.
All models come complete with a standard 4.6 m (15') cable; non-standard lengths are available for additional cost. The sensors feature ¾ MNPT front and rear facing threads as the process connection.
ATC Sensor Options
Automatic Temperature Compensation is configurable via specific option codes:
- -PT100: 100 Ω Platinum RTD (standard for -HT high temperature version).
- -PT1K: 1000 Ω Pt RTD.
The series holds RoHS certification. The reference cell utilizes a double junction KNO3 and KCl/AgCl design.
Key Product Differences
Differences within the PHE-7352-15-(*) model number guide are defined by insertion length, temperature rating, and ATC sensor type. The base models (PHE-7352-15 and PHE-7353-15) represent heavy-duty submersible pH electrodes without specified ATC options in the part number suffix.
Variants with "-PT100" or "-PT1K" suffixes include the respective RTD sensors. The addition of the "-HT" suffix designates the high temperature version (0 to 110°C) which includes a 100 Ω Pt RTD ATC and supports up to 150 psig pressure.
PHE-735253-152550-PT100-PT1K<"" span class=" " v v-ax4-additional-option-x-1 ><"" span class=" " v v-ax4-additional-option-ht-2" " >-HT-HF