検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-485B

ハンドヘルド温湿度計 - 温度、湿度、露点 - NIST校正済み

  • Dwyer AP1サーモアネモメーターおよびVP1 100 mmベーンサーモアネモメータープローブ(別売)に対応
  • ディスプレイ上の現在の測定値を固定するホールド機能
  • 最大99件の測定値を保存し、後で評価可能
Model-485B
販売元 ¥ 88,168
ハンドヘルド温湿度計 - 温度、湿度、露点 - NIST校正済み Model-485B Model-485B
loading all models
製品の概要
  • 정확도 세부 사항 상대 습도 범위: 77°F (25°C)에서 10~90% 범위 내 ± 2% FS, 온도 정확도: 77°F(25°C)에서 ± 0.9°F(± 0.5°C)
  • 응용 분야 HVAC, 산업 및 제조업
  • 습도 정확도 ± 2 % RH
  • 습도 범위 0 ~ 100% RH
  • 미디어 호환성 HVAC / 실내 공기
  • 작동 온도, 최대 125 °F
  • 최소 작동 온도 5 °F
  • 프로브 치수 사양 참고 8˝(203 mm) 삽입형
  • プローブ長 8 in
  • プロセス温度(最高) 176 °F
  • プロセス温度(最低) -40 °F
  • シリーズID Model-485B
  • 温度精度 ± 0.9 °F
  • 温度測定範囲 -20 ~ 140°F
  • 重量 16 oz

Supported Applications

The Dwyer Model 485B is a handheld thermo-hygrometer designed for humidity, temperature, wet bulb, and dew point temperature detection in clean air. The instrument measures the percentage of relative humidity and temperature in °F or °C, with derived values displayed on the LCD.

Operating Conditions & Performance

The Model 485B operates within a process temperature range of -20 to 140°F (-28 to 60°C) for measurement and an ambient operating temperature of 5 to 125°F (-15 to 51°C). Relative humidity is measured from 0 to 100% (non-condensing).

  • Relative Humidity Accuracy: ±2% FS over 10 to 90% @ 77°F (25°C)
  • Temperature Accuracy: ±0.9°F @ 77°F (±0.5°C @ 25°C)
  • Resolution: 0.1%, 0.1 °F/°C
  • Display: 4.5 digit LCD with backlighting

The unit features a probe insertion length of 8" (203 mm) and weighs 16 oz (454 g). It is powered by an included 9 V alkaline battery, which includes a low-battery indicator on the display.

Configuration Options

The Model 485B-1 variant supports interchangeable probes within the Dwyer family without recalibration. The series offers specific functional capabilities for data logging and reading stability:

  • Data Storage: Non-volatile memory stores up to 99 readings.
  • Hold Function: Freezes current temperature and relative humidity readings on display.
  • Dual Units: Displays measurements in imperial or metric units (°F/°C).

The instrument carries CE approval. Accessories available for the series include a protective magnetic rubber boot, hard carrying case, and various probe types including hot wire thermo-anemometer probes and vane thermo-anemometer probes.

Key Product Differences

The Model 485B is distinguished from other models in the family (such as the 471B-1 and 473B-1) by its specific focus on relative humidity measurement alongside temperature. While the 471B-1 utilizes a hot wire thermo-anemometer probe for air velocity, volumetric flow, and temperature, and the 473B-1 uses a vane thermo-anemometer probe for similar parameters, the Model 485B employs a dedicated thermo-hygrometer probe. The Model 485B does not measure air velocity or volumetric air flow.

Calibration options such as Certificate of Calibration (-COC), Factory Calibration (-FC), and NIST traceable calibration certificates are documented for the broader family but apply specifically to the 473B model; these specific option codes are not listed for the Model 485B in the provided documentation.

アクセサリー

sensors

Thermo Hygrometer Humidity & Temperature Probe With Coiled Cable.
¥48,801 / 各
0 在庫あり
モデル-1--NIST
範囲
オプション
"
ja-JP
ja_JP
設定を保存する