検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

CDH45-Series

携帯用塩分計、ATC、グラム換算

  • デュアルディスプレイ:塩分濃度と温度
  • 塩分範囲:0.1~10%
  • 自動温度補償
  • 平均計算、間隔測定、グラム換算
CDH45-Series
販売元 ¥ 32,865
携帯用塩分計、ATC、グラム換算 CDH45-Series CDH45-Series
loading all models
製品の概要
  • 追加機能 1 サーミスタ温度センサーおよび塩分濃度プローブを含む
  • バッテリーのサイズと種類 アルカリAAA
  • ケーブル長 0.8 mm
  • 校正に関する注記 基準条件:18~28°C
  • 導電率測定 該当なし
  • データインターフェース RS232
  • 表示タイプ LCD
  • 溶存酸素範囲 該当なし
  • 高さ 167 mm
  • 湿度範囲 0~70% RH
  • 長さ 24 mm
  • 測定タイプ 塩分濃度、温度
  • メモリーカード 該当なし
  • 動作温度(最高) 60 °C
  • 動作温度(最低) -20 °C
  • ORP測定範囲 該当なし
  • pH測定範囲 該当なし
  • 極性 自動、正極性(暗黙)、負極性表示
  • プローブ長 177 mm
  • ソルトレンジ 該当なし
  • センサータイプ サーミスタ
  • シリーズID CDH45-Series
  • 保存時の最大湿度 < 80 %
  • 最大保管温度 60 °C
  • 保管温度(最低) -20 °C
  • 電源注記 「AAA」電池、 低電池残量表示:「+ -」が表示されます
  • 温度精度 ± 0.5°C
  • 温度精度の注記 ±0.5°C (±1°F): 0~45°C (3~113°F) ±1°C (±2°F): -20~0°C、45~60°C (4~32°F、113~140°F)
  • 温度補償 -5~60°C(23~140°F)、自動
  • 温度分解能 0.1°C
  • 総溶解固形物範囲 該当なし
  • 重量 330 g
  • 幅 48 mm

Supported Applications

The CDH45 is a handheld digital salinity meter that measures salinity and temperature simultaneously through an integral probe, with automatic temperature compensation and a dual display. It is built for low-concentration salinity measurement and reads out relative salinity alongside a precision thermistor temperature reading.

Typical applications include:

  • Water monitoring and holding tanks.
  • Seawater-prepared food solutions.
  • Breeding ponds and aquariums.

Convenience features include average calculation, interval measuring, a gram conversion function, and a lightweight handheld body. The meter is marked CE and UKCA and is manufactured to ISO 9001 and ISO 9002 certified quality systems. For accurate readings, turn on the meter before placing the probe into the salt solution, and rinse the probe thoroughly with tap water after each use.

Operating Conditions & Performance

The CDH45 measures relative salinity from 0.1 to 10% and temperature over -20 to 60°C (-4 to 140°F), with a temperature resolution of 0.1°C (0.1°F). Automatic temperature compensation operates from -5 to 60°C (23 to 140°F).

Salinity accuracy tightens and loosens across the range, stated by band:

  • ±0.1 from 0 to 0.9%
  • ±0.2 from 1.0 to 1.9%
  • ±0.3 from 2.0 to 2.9%
  • ±0.5 from 3.0 to 4.9%
  • ±1.0 from 5.0 to 7.9%
  • ±1.5 from 8.0 to 10.0%, depending on measuring technique

Temperature accuracy is ±0.5°C (±1°F) from 0 to 45°C and ±1°C (±2°F) across the outer bands of -20 to 0°C and 45 to 60°C. The meter operates from 0 to 50°C (32 to 122°F) at <75% RH and stores at -20 to 60°C (-4 to 140°F) at 0 to 80% RH with the batteries removed. Reference conditions are 18 to 28°C at <75% RH.

Configuration Options

The CDH45 is a single-configuration instrument, so its capabilities come from its integrated feature set rather than from model-to-model differences. It combines a salinity channel with a highly accurate thermistor temperature sensor on one display, and it applies automatic polarity handling with a negative-polarity indication.

Measurement aids include average calculation, interval measuring and a gram conversion mode, and a low-battery indicator warns when the battery voltage drops below the operating level. The instrument runs on three 1.5 V "AAA" batteries, giving around 100 hours of battery life.

Key Product Differences

The model number follows the guide CDH45 - <Model> - <Description>. The orderable line is compact:

  • CDH45 - salinity meter with integral probe.
  • MN2400 - replacement "AAA" battery (3 required).

Each CDH45 comes complete with 3 "AAA" batteries, the probe and the operator's manual. The meter body measures 167 H x 48 W x 24 mm D (6.5 x 3.0 x 1.5") and weighs 330 g (0.6 lb) with probe and batteries, while the probe itself is 177 mm (7.0") long on a 0.8 m (34") cable.

ja-JP
ja_JP
設定を保存する