検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

IP210A-IP210

汎用電流-圧力変換器 I/Pコンバーター

  • ループ電源
  • 空気圧制御システムに最適
  • IP65シールケース/NEMA 4タイプエンクロージャ
  • 現場校正用ゼロおよびスパン調整
IP210A-IP210
販売元 ¥ 162,538
汎用電流-圧力変換器 I/Pコンバーター IP210A-IP210 IP210A-IP210
loading all models
製品の概要
  • 精度の詳細 直線性、ヒステリシスおよび再現性を含む
  • 承認 クラスI、区分1、グループCおよびD
  • 電気接続 DIN 43560 コネクタ
  • EMC規格 IEC 61000-4-3
  • エンクロージャーの定格 IP65, NEMA タイプ 4X
  • エンクロージャータイプ 該当なし
  • 流量に関する注記 12 scfm @ 100 psig 20 scfm @ 150 psig
  • インピーダンス 315 Ω
  • 入力制御信号 該当なし
  • 入力電流 0~20 mA
  • 入力電圧 該当なし
  • 材料建設オプション 該当なし
  • 材料 ステンレス鋼、真鍮、亜鉛、エポキシ、クロメートアルミニウム、NBR
  • 対応媒体 クリーンな乾燥空気 / 不活性ガス
  • 取付 直接壁取付、パネル取付、DINレール取付
  • 動作温度(最高) 60 °C
  • 動作温度(最低) -30 °C
  • プロセス接続サイズ 1/4インチ
  • プロセス接続タイプ NPT メス
  • シリーズID IP210A-IP210
  • 重量 590 g

Supported Applications

The Omega IP210A and IP210 series are General Purpose Current to Pressure I/P Converters designed for industrial process control applications. These electropneumatic transducers convert an analog electrical input signal, typically 4-20 mA, into a proportional linear pneumatic output pressure suitable for driving pneumatic actuators or valves.

Operating Conditions & Performance

The series offers distinct performance envelopes depending on the specific model family. The IP210A Series (models X15 and X30) provides an accuracy of ±1.5% FS, while higher range models in this family (X60 and X120) list an accuracy of ±2.3% FS. In contrast, the standard IP210 Series achieves a tighter accuracy of ±0.5% FS across its ranges.

Performance characteristics include repeatability better than 0.5% of span for both series families and hysteresis less than 1.0% of span. Linearity is specified as <1.0% of span for IP210A-X15/X30 models and <2.0% of span for X60/X120 variants.

Operating ambient temperatures vary by series: the IP210A Series operates from -29 to 60 °C (-20 to 140 °F), while the IP210 Series supports a wider range of -20 to 70°C (5 to 160°F). The units require oil-free, clean, dry air filtered to 25 μm. Supply pressure requirements differ by model; for example, the IP210A-X15/X30 requires supply at least 3 psi above maximum output pressure, whereas X60/X120 models require 5 psi above.

Configuration Options

The series supports multiple pneumatic output ranges to match specific control needs. Available configurations include:

  • IP210A Series Output Ranges: 3-15 psig, 6-30 psig (X30), 2-60 psig (X60), and 3-120 psig.
  • IP210 Series Output Ranges: 3 to 15 psig, 3 to 30 psig, 3 to 60 psig, and 3 to 120 psig.

Housing options include a NEMA 4 Type enclosure with epoxy-painted zinc die castings for the IP210A Series. The standard IP210 Series features an IP65 rated sealed case constructed from similar materials. All models utilize a 1/4" FNPT pressure port and DIN 43650 electrical connections with screw terminals included.

Power configurations vary: most models are loop powered, except the IP210-X120 which requires an external 24 Vdc power supply in a 3-wire system. Wetted materials include nitrile diaphragms, nozzles, and supply valves.

Key Product Differences

The primary distinction between the two families lies in accuracy class and enclosure rating. The IP210 Series is specified with an IP65 rated housing and ±0.5% FS accuracy, whereas the IP210A Series carries a NEMA 4 Type designation with accuracies of ±1.5% or ±2.3% FS depending on range.

Supply pressure limits also differentiate the models: the IP210A-X15/X30 supports up to 100 psi, while X60/X120 variants support up to 150 psi (with a specific note for IP210-X120 requiring 80 psi max supply or 135 psi in certain configurations). Air consumption varies by flow rate requirements; the IP210A Series consumes approximately 0.1 SCFM, while higher pressure variants consume less.

ja-JP
ja_JP
設定を保存する