日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
LR15-Series
Flowline レーダーレベルトランスミッター(NPT接続)
- 堅牢な316Lステンレス製アンテナおよびプロセスマウント
- 一体型プッシュボタンディスプレイモジュールによる簡単設定
- 26 GHzパルスレーダーは蒸気や結露の影響を受けない
- 12インチ(30cm)のデッドバンドによりタンク全体の利用が可能
製品の概要
- 精度 ± 3 mm
- アンテナ直径 3 in
- アンテナ長 8.94 in
- 承認 CE、RoHS、CRN、cTUVus、FCC
- 棒グラフ スパンに対する割合
- ビーム角 12°
- コンフィグレーション プッシュボタン
- デッドバンド 12インチ
- 表示およびインジケータ エコー信号曲線
- 表示単位 フィート, m
- 表示タイプ LCD
- 電気接続 1/2インチ NPT
- 電気出力 0~20 mA
- エンクロージャーの定格 IP67, NEMA タイプ 6
- 周波数 26 GHz
- 材料 316 ステンレス鋼、ポリカーボネート、アルミニウム
- 測定範囲(最小) 1 ft
- メモリ 不揮発性
- ワイヤ本数 2
- 動作圧力(最大) 150 psi
- 動作圧力(最小) -14.5 psi
- 消費電力 22.5 mA
- プローブタイプ 3インチホーンアンテナ
- プロセス接続サイズ 1 1/2インチ
- プロセス接続タイプ NPT オス・メス
- プロセス温度(最高) 150 °C
- プロセス温度(最低) -60 °C
- シリーズID LR15-Series
- 信号フェイルセーフ 3.9 mA、20.5 mA、22 mA
- 信号反転 4~20 mA、20~4 mA
- 最大保管温度 80 °C
- 保管温度(最低) -40 °C
- 供給電圧 16から26Vdc
- 戦車タイプ どれでも
- 温度補償 自動
Supported Applications
The Omega EchoPulse® LR15 Series is a general-purpose, two-wire pulse radar level transmitter designed for continuous liquid level measurement in above or below grade tanks. The series operates by emitting microwave pulses and measuring the time of flight to provide a proportional current output.
Documented applications include:
- Petroleum storage
- Water processing, lift stations, storm water, and sump process conditions
- Diluted chemical storage or process applications with low or non-corrosive media
- Bulk storage tanks and tanker trucks
- Process tanks including waste sumps and neutralization tanks
- Tanks experiencing light foam, agitation, condensation, or vapor conditions
Operating Conditions & Performance
The LR15 Series provides a measurement range of 12" to 98.4' (30cm to 30m) with an accuracy of ± 3mm and a resolution of 1 mm. The sensor operates at a frequency of 26 GHz.
Performance specifications include:
- Process Temperature: F: -76° to 302°, C: -60° to 150°
- Storage Temperature: F: -40° to 176°, C: -40° to 80°
- Process Pressure: -14.5 to 150 psi (-1 to 10 bar)
- Dead Band: Factory set at 12" (30cm); can be lowered to 2" from the bottom of the antenna
- Enclosure Rating: IP67 with an aluminum housing and silicone gasket
- Power Supply: 16-26 VDC, maximum consumption 22.5 mA
The series supports a fail-safe output setting of 3.9 mA, 20.5 mA, or 22 mA.
Configuration Options
The LR15 Series is configurable across antenna sizes to optimize beam angle for specific tank geometries and installation requirements. The standard process connection is a 1-1/2" NPT thread.
- Antenna Options:
- -20: 2" (48mm) horn, 18° beam angle
- -30: 3" (78mm) horn, 12° beam angle
- -40: 4" (98mm) horn, 8° beam angle
- Wetted Material: Antenna constructed of 316L stainless steel.
- Housing & Electrical Connection: Aluminum enclosure with polycarbonate window. Conduit entrance includes (1) ½" NPT connector and (1) M20 x 1.5 plug.
- Output Signal: 4-20 mA, two-wire; configurable for inverted signal (4-20 mA, 20-4 mA).
The series supports optional mounting accessories including reducer bushings and ANSI flanges to adapt the standard NPT connection. Available fittings include:
- Reducer Bushings: PVC schedule 40/80 (LM53-2400, LM53-2800, LM53-3800) and 316 stainless steel (LM53-2S10).
- ANSI Flanges: Available in 3", 4", and 6" sizes for both 316 stainless steel (SS: LM53-3S50, LM53-4S50, LM53-6S50) and CPVC schedule 80 (LM53-3850, LM53-4850, LM53-6850).
Key Product Differences
The primary variation within the LR15 Series is defined by the antenna size code in the model number (e.g., -20, -30, -40), which dictates the beam angle and physical dimensions of the sensor head.
- LR15-...-20: Features a 2" (48mm) horn with an antenna length of 5.51" (140mm).
- LR15-...-30: Features a 3" (78mm) horn with an antenna length of 8.94" (227mm).
- LR15-...-40: Features a 4" (98mm) horn with an antenna length of 11.34" (288mm).
The series includes integral configuration via a push-button display module featuring an LCD dot matrix screen that displays units in feet and meters, percent of span bar graph, and echo signal curve.
PDFとマニュアル