検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

OS212

固定赤外線温度センサー(放射率調整可能、表示オプション付き)

  • 온도 범위 -20 ~ 500°C (-4 ~ 932ºF)
  • 대상 온도에 비례하는 2선식 4~20 mA 출력
  • 방사율 설정 제어용 4~20 mA 입력
  • 선택 사양 수동 방사율 조정기 (모델 번호 OS210-PT)
OS212
販売元 ¥ 82,125
固定赤外線温度センサー(放射率調整可能、表示オプション付き) OS212 OS212
loading all models
製品の概要
  • 정확도 ± 1%
  • 정확도 세부 사항 읽기값의 ± 1% 또는 ± 1ºC 중 더 큰 값
  • 케이블 길이 3.3 ft
  • 케이블 길이 참고 1 m (3.3') (포함) 더 긴 길이는 주문 가능
  • 디스플레이 아니요
  • 방사율, 최대 1
  • 최소 방사율 0.2
  • 방사율 노트 0.2~1.0, 4~20 mA 입력을 통해
  • 외함 등급 IP65
  • 시야 2:1
  • 하우징 재질 스테인리스 스틸
  • 임피던스 900 Ω
  • 작동 온도, 최대 70 °C
  • 최소 작동 온도 0 °C
  • 출력 신호 현재
  • 최소 공정 온도 0 °C
  • 최대 상대 습도 0.95
  • 상대 습도 사양 참고 최대 95% 비응축
  • 반복성 ± 0.5%
  • 반복성 주의사항 읽기값의 ± 0.5% 또는 ± 0.5ºC 중 더 큰 값
  • 응답 시간 240 ms
  • 응답 시간 사양 참고 240 mS (90% 응답)
  • 센싱 헤드 마운트 16mm
  • 센서 전압 6 Vdc
  • 시리즈 ID OS212
  • 분광 응답 최대 14 μm
  • 분광 응답 최소 8 μm
  • 공급 전압 24 ~ 28 Vdc
  • 온도 범위 MT-중간
  • 무게 95 g
  • 무게 사양 참고 케이블 포함 95 g (3.4 oz)

Supported Applications

The Omega OS212 Series consists of compact non-contact infrared temperature sensors designed to measure the surface temperatures of inaccessible or moving objects and materials. The series provides a linear output signal compatible with indicators, controllers, recorders, and data loggers without requiring special interfacing or signal conditioning.

Operating Conditions & Performance

The OS212 Series measures process temperatures across three ranges: -20 to 100°C (-4 to 212°F), 0 to 250°C (32 to 482°F), and 0 to 500°C (32 to 932°F). Accuracy is specified as ±1% of reading or ±1°C whichever is greater, with repeatability of ±0.5% of reading or ±0.5°C whichever is greater. The sensors operate within an ambient temperature range of 0 to 70°C (32 to 158°F) and a relative humidity limit of 95% max non-condensing.

Performance characteristics include a response time of 240 mS (90% response) and a spectral range of 8 to 14 μm. The sensors are constructed from stainless steel with an IP65 environmental rating. Electrical requirements specify a supply voltage of 24 Vdc (28 Vdc max), a minimum sensor voltage of 6 Vdc, and a maximum loop impedance of 900 Ω for the 4 to 20 mA output.

Configuration Options

The series is available in four optical configurations identified by model prefixes: OS212 (2:1 optics), OS152 (15:1 optics), OS302 (30:1 optics), and OS802 (close-focus, ø5mm @ 100mm). Each optic supports the three temperature ranges denoted by suffixes -LT, -MT, or -HT. The standard sensor dimensions are 103 L x 18 mm D (4.05 x 0.71") with an M16 x 1 mm pitch thread mounting and a 1 m cable.

Configurable Emissivity

Emissivity is adjustable from 0.2 to 1.0 via a 4 to 20 mA input, allowing automatic adjustment from a programmable logic controller (PLC). If the 4-20 mA input is left open or short-circuited, the emissivity setting defaults to 0.95. Manual adjustment is available using the optional OS210-PT Tune Emissivity Adjuster.

Options and Accessories

  • Cable extensions: Suffixes -CE (uncooled) or -CEHT (high temperature, cooled) allow total cable lengths up to 30 m (98').
  • Housing options: Air/water cooled jacket (-WC suffix), which includes an air purge collar and must be ordered with the sensor.
  • Mounting hardware: Fixed bracket (OS210-FBS) or adjustable bracket (OS210-ABS).
  • Air purge collars: OS210-APSW for 2:1 sensors; OS210-APSN for 15:1, 30:1, and close-focus sensors.
  • Sighting tools: Laser sighting tool (OS210-LSTS).
  • Calibration: NIST-traceable calibration (CAL-3-IR†) is available as an option.

Key Product Differences

The primary distinction within the series lies in the optical field of view and temperature range. The OS212 model provides 2:1 optics, while OS152 offers 15:1, OS302 offers 30:1, and OS802 provides close-focus capabilities (ø5mm @ 100mm). Temperature ranges are segmented by suffix: -LT covers -20 to 100°C (-4 to 212°F), -MT covers 0 to 250°C (32 to 482°F), and -HT covers 0 to 500°C (32 to 932°F). The OS210-PT accessory is a separate unit with a polycarbonate housing, surface mounting, and dimensions of 65 H x 50 W x 35 mm D (2.56 x 1.97 x 1.38"). It features a 3.5 digit LCD display showing emissivity or current values.

アクセサリー

accessories

Laser sighting tool for compact sensors
¥101,389 / 各
0 在庫あり
(Display module) Tune emissivity adjuster, 24 Vdc input, 4 to 20 mA output
¥46,472 / 各
0 在庫あり

cables

Power / Output Cable 100 ft (30 m)
¥33,489 / 各
0 在庫あり

installation hardware

Adjustable mounting bracket for compact sensors
¥11,055 / 各
0 在庫あり
Fixed bracket for compact sensors
¥4,860 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する