検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

FOS-Series

ファイバ光温度センサー

  • 温度範囲:-200 °C~250 °C
  • センサーは再校正不要
  • 精度:±0.8 °C(相対温度で±0.2 °C)
  • FOS-LU-*モデルはポリイミド素材でコーティングされたより耐久性の高いセンサー先端を採用
FOS-Series
販売元 ¥ 78,768
ファイバ光温度センサー FOS-Series FOS-Series
loading all models
製品の概要
  • 精度 ± 0.8 °C (± 1.44 °F)
  • 追加機能 1 なし
  • 電気接続 STコネクタ
  • プローブ径 0.0625 in
  • プロセス温度(最高) 250 °C
  • プロセス温度(最低) -200 °C
  • 繰り返し精度 0.2°C
  • 応答時間(最大) 200 ms
  • 応答時間(最小) 0 ms
  • 応答時間の注記 最大200 ms
  • シリーズID FOS-Series

Supported Applications

The Omega FOS-Series Fiber Optic Temperature Sensors are designed for temperature measurement in environments where immunity to electromagnetic interference (EMI), radio frequency interference (RFI), nuclear magnetic resonance (NMR), and microwave radiation is required. The series utilizes light transmission through fiber optic cables rather than resistance or voltage, providing reliable signal transfer without degradation due to cable length.

Operating Conditions & Performance

The FOS-Series operates within a process temperature range of -200°C to 250°C (-328°F to 482°F). The sensors deliver an accuracy of ±0.8°C (1.8°F) with a repeatability of 0.2°C in relative temperature measurements. Response time is up to 200 ms.

Key performance characteristics include:

  • Process Temperature Range: -200 to 250°C (-328 to 482°F)
  • Accuracy: ±0.8°C (1.8°F)
  • Repeatability: 0.2°C
  • Response Time: Up to 200 ms
  • Sensor Diameter: 1.6 mm (1/16")

The sensors do not require recalibration and maintain high stability over time.

Configuration Options

The series is available in two primary configurations distinguished by the sensor tip coating material:

  • FOS-LT-* Models: Feature a PTFE coated fiber optic sensor. Available lengths include 2, 3, 5, and 10 meters (e.g., FOS-LT-5).
  • FOS-LU-* Models: Feature a more durable polyimide material coating on the sensor tip. Available in matching length options.

All models utilize an ST Connector for electrical connection and are constructed with PTFE cable materials or Polyimide wetted parts depending on the model series. Cable extension accessories are available to complete the system, which requires a fiber optic monitor (not included).

Key Product Differences

The primary distinction within the FOS-Series lies in the sheath and tip coating materials:

  • FOS-LT Series: Utilizes PTFE for the cable material, suitable for general applications requiring EMI/RFI immunity.
  • FOS-LU Series: Incorporates a polyimide coated sensor tip designed to be more durable than standard coatings while maintaining the same measurement range and performance specifications.

Variants are differentiated by length, indicated in the model number (e.g., -2 for 2 meters, -10 for 10 meters). No other dimensional variations such as insertion depth or overall housing dimensions are specified beyond the probe diameter of 1.6 mm (1/16").

ja-JP
ja_JP
設定を保存する