日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-1950G
防爆差圧スイッチ、防雨型、UL認定、24 V
- 天然ガス対応
- 外部設定ねじにより、筐体を開けたり分解したりせずに調整が簡単に行えます
- 簡単にアクセスできる電気接続により、設置が容易です
製品の概要
- 電気接続 ネジ端子
- 材料、湿潤 メーカーにお問い合わせください
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, 燃料ガス, HVAC / 室内空気, 不活性/非反応性ガス
- 取付方向 垂直ダイアフラム
- 動作温度(最高) 140 °F
- 動作温度(最低) 0 °F
- 圧力タイプ 差分
- プロセス接続サイズ 1/8インチ
- プロセス接続タイプ NPT メス
- 耐圧力 最大45 inH₂O
- シリーズID Series-1950G
- セットポイント調整 外部ネジ
- スイッチノート 1フォームCリレー(SPDT)、10 A、120/240 Vac、28 Vdc。抵抗負荷 50 mA、125 Vdc
- スイッチ定格 10 A @ 120/240 Vac/28 Vdc; 50 mA @ 125 Vdc
- スイッチタイプ SPDT NO/NC、選択可能
- 重量 1.35 kg
Supported Applications
The Dwyer Series 1950G is an explosion-proof differential pressure switch designed for monitoring air and compatible combustible gases. The series combines the functionality of the popular Series 1900 Pressure Switch with a compact, rain-tight housing suitable for outdoor installations. It is engineered for use in hazardous locations including Class I, Groups A*, B, C, D; Class II, Groups E, F, G; and Class III atmospheres.
Operating Conditions & Performance
The Series 1950G operates within an ambient temperature range of 0 to 140°F (-17 to 60°C). The unit is rated for a continuous pressure limit of 45 in w.c. (11.2 kPa) and can withstand surge pressures up to 10 psig (68.95 kPa). Six distinct operating ranges are available, covering set-points from 0.07 to 20 in w.c.
Performance specifications include the following approximate deadbands based on model range:
- 1950G-00-B: Range 0.07 to 0.15 in w.c.; Deadband at min set point: 0.04; Max set point: 0.06.
- 1950G-0-B: Range 0.15 to 0.5 in w.c.; Deadband at min set point: 0.06; Max set point: 0.11.
- 1950G-1-B: Range 0.4 to 1.6 in w.c.; Deadband at min set point: 0.11; Max set point: 0.29.
- 1950G-5-B: Range 1.4 to 5.5 in w.c.; Deadband at min set point: 0.4; Max set point: 0.9.
- 1950G-10-B: Range 3.0 to 11.0 in w.c.; Deadband at min set point: 0.9; Max set point: 1.8.
- 1950G-20-B: Range 4.0 to 20.0 in w.c.; Deadband at min set point: 1.2; Max set point: 3.0.
Note that switch capabilities may decrease with an increase in ambient temperature, load inductance, or cycling rate. Set point drift may occur with ambient temperature changes.
Configuration Options
The series is offered with multiple certification options and power configurations to meet regional safety standards and electrical requirements.
- Certifications: Units are available with UL, CSA, FM listings; ATEX compliance (II 2G Ex db IIB+H2 T6 Gb); IECEx certification (IECEx UL 19.0045X); UKCA Ex approval; China CCC; Korea KCs; and India PESO registration.
- Power Supply: Standard operation is on 24 VDC ±10%. Optional power supplies include 120 or 240 VAC ±10%.
- Output Signal: The switch provides a 1 Form C relay (SPDT) output. Electrical ratings are listed as 10 A, 120/240 VAC, 28 VDC resistive; and 50 mA, 125 VDC.
- Housing & Connections: The enclosure is constructed of anodized aluminum with a rating of IP54 (NEMA 3) and NEMA 7 and 9. Process connections are provided via two 1/8" female NPT ports for low and high pressure sensing. Electrical entry utilizes a 1/2" female NPT conduit connection.
- Dimensions: The unit measures approximately 5-7/16 in [138.1 mm] diameter with an overall height of 4-7/8 in [123.8 mm]. Weight is listed as 2 lb 15.7 oz (1.35 kg).
Key Product Differences
Variants within the Series 1950G are distinguished by their operating range, voltage selection, and certification suffix.
- Certification Suffixes: The model number includes a suffix to denote approval: "NA" indicates UL/CSA/FM approvals (not ATEX compliant); no suffix or specific codes indicate compliance with ATEX, IECEx, UKCA Ex, CCC, KCs, or PESO standards.
- Voltage Selection: The final digits of the model number specify voltage: "24" for 24 VDC, "120" for 120 VAC, and "240" for 240 VAC.
- Housing Access: A captive screw allows the top plate to swing aside while remaining attached, providing access to the internal terminal block without full disassembly. Set point adjustment is made via a screw type mechanism on top of the housing.
アクセサリー
RoHS 2015/863 - 証明書を見る
UL認定済み
CSA
FM
1950G-000151020-B-12024024-NA-AT-PRESET-ST-KC-PESO-CCC




