検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-SCD-PS

Dwyer DIN Rail Mount DC Power Supply

  • Wide input: 100–240 VAC, 50/60 Hz—no switches or jumpers needed
  • DIN rail mount, compact design for easy panel integration
  • Reliable DC power for Dwyer transmitters (pressure, temp, etc.)
  • Protective terminal cover helps prevent accidental electrical shock
Series-SCD-PS
販売元 ¥ 7,143
Dwyer DIN Rail Mount DC Power Supply Series-SCD-PS Series-SCD-PS
loading all models
製品の概要
  • 電流出力範囲 最大 1 A
  • 入力電圧 100~240 VAC
  • ノイズ < 100 mVp-p
  • 動作温度(最高) 55 °C
  • 動作温度(最低) 0 °C
  • シリーズID Series-SCD-PS
  • 供給電圧 100から240 Vac
  • 重量 158 g

Supported Applications

The Dwyer Model SCD-PS is a DIN Rail Mount DC Power Supply designed to provide power for pressure, humidity, temperature, level, or air velocity transmitters. It functions as an open-type unit intended for installation within an enclosure to protect against dust, humidity, electric shock, and vibration.

Operating Conditions & Performance

The SCD-PS accepts a universal AC input of 100–240 VAC (-15%~+10%), 50 / 60 Hz. It delivers a regulated DC output of 24VDC (±3%) with a maximum current capacity of 1A. The unit features auto-recovery protection for over-load and short circuit conditions, maintaining operation during power cuts shorter than 10ms.

Performance specifications include:

  • Ripple & Noise: Under 100mVp-p typical at full load
  • Efficiency: 78%~87% typical at full load
  • Ambient Temperature (Operation): 32 to 131°F (0 to 55°C)
  • Humidity (Operation): 50~95%
  • Storage Environment: -25°C ~ 70°C, 5~95% humidity

The unit weighs 158 g (5.6 oz) and requires a minimum clearance of 50mm on all sides for heat dissipation.

Configuration Options

The SCD-PS series is configured as a DIN rail mount device with fixed terminals labeled L, N, +24V, and 0V. A plastic cover slides over the terminals to prevent accidental contact with high voltage wires. The unit includes a green 'POWER' LED indicator on the front panel.

Key configuration details include:

  • Housing Style: Open-type design requiring an external enclosure
  • Mounting: DIN rail mount with terminal block access
  • Grounding Requirement: Ground wire diameter must not be smaller than the L and N terminals; use wires of 1.6mm or larger for grounding.
  • Pollution Degree: Pollution degree 2 (Operation)

Key Product Differences

The series is identified by the model number SCD-PS, described as a "DIN rail DC power supply." The unit complies with Underwriters Laboratories, Inc.: UL508 Listed (Industrial Control Equipment) and carries CE and cULus approvals. It meets European Community EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC requirements.

Installation notes specify that AC input must be connected to terminals L and N; connecting AC voltage directly to the +24V terminal will permanently damage the unit. The device is not suitable for dusty, smoky, or corrosive atmospheres without appropriate enclosure protection.

ja-JP
ja_JP
設定を保存する