한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-L8
내구성 액체 레벨 스위치, 누수 방지 바디, UL 인증
耐久性液面スイッチ、防漏構造、UL認定- 내구성 있는 폴리페닐렌 설파이드로 제작된 플로트와 누수 방지 본체로 우수한 화학 저항성 제공
- 누수나 고장이 없는 직접 기계적 연결이 없는 자기 작동식 액면 스냅 스위치로 수명 연장 및 유지보수 비용 감소
- 인덱스 화살표가 아래를 향하도록 수평 위치에 장치를 간단히 배치하여 빠르고 쉬운 설치
- UL 표준 508에 따른 산업용 모터 컨트롤러로서 UL 인증을 받은 보호된 환경에 적합한 장착
제품 개요
- 응용 분야 화학 정제소, 화학물질
- 케이블 재질 해당 없음
- 전기 연결 1/2 in NPT male Conduit with Wire Leads
- 접액부 재질 316 스테인리스 스틸, 도자기, 인코넬, PPS
- 미디어 호환성 정제 공정 / 냉각수, 호환 가능한 액체, 오일 / 윤활제, 유기 용매
- 장착 방향 아래쪽 지위를 가진 수평
- 작동 온도, 최대 212 °F
- 압력 유형 궤간
- 프로세스 연결 크기 1인치
- 프로세스 연결 유형 NPT 수나사
- 증명압 최대 150 psi
- 시리즈 ID Series-L8
- 비중, 최소 0.6
- 스위치 사양 참고 5 A @ 125/250 Vac, 5 A 저항 부하, 3 A 유도 부하 @ 30 Vdc. MV 옵션: 1 A @ 125 Vac, 1 A 저항 부하, 0.5 A 유도 부하 @ 30 Vdc.
- 스위치 등급 30 VA: 0.14 A @ 220 Vac
- 스위치 유형 SPDT Snap
- 무게 5 oz
- 와이어 게이지 18 AWG
Supported Applications
The Dwyer Model L8 FLOTECT® Liquid Level Switch is designed for liquid level alarm, indication, or control. The series provides accurate set point control of compatible liquids with specific gravities as low as 0.6 minimum.
Operating Conditions & Performance
The switch operates within a temperature limit of 212°F (100°C) and supports a pressure rating up to 150 psig (10.34 bar). The unit is constructed with wetted materials including Polyphenylene Sulfide (PPS) for the float and body, Ceramic 8 magnets, and pins/springs made of 316 SS or Inconel® alloy depending on configuration.
Electrical ratings vary by option:
- Standard SPDT snap switch: 5 A @ 125/250 VAC, 5 A resistive, 3 A inductive @ 30 VDC
- MV Option (Gold Plated Contacts): Rated for dry circuits at 1 A @ 125 VAC; 1 A resistive, 0.5 A inductive @ 30 VDC
The device features a leak-proof body and is magnetically actuated to eliminate direct mechanical linkage.
Configuration Options
The Series L8 offers configurable options for wetted materials, contact types, and enclosure ratings. The standard process connection is 1/2" male NPT (data sheet) or 1" male NPT (manual); the data sheet specifies 1/2" male NPT as the primary series value.
Available configurations include:
- -INC Option: Inconel® alloy replaces standard 316 SS wetted parts. Wetted parts consist of Inconel® alloy, ceramic 8, and polyphenylene sulfide.
- -MV Option: Gold plated contacts for dry circuits with reduced electrical ratings suitable for low-current applications.
- -WP Option: Weatherproof enclosure with a phenylpolioxide housing providing protection for electrical wiring. Note: This option is not UL approved.
- -WP2 Option: Weatherproof enclosure with an aluminum housing providing protection for electrical wiring. Note: This option is not UL approved.
The standard unit features a general purpose enclosure rating, while WP and WP2 options provide weatherproof ratings. Electrical connections are provided via 18 AWG wires, 18" (460 mm) long. Conduit connection is available as 1/2" male NPT on the standard model; WP and WP2 models feature a 1/2" female NPT conduit connection.
Key Product Differences
The series distinguishes between standard, dry-circuit, and weatherproof configurations. The Model L8 base unit utilizes Polyphenylene Sulfide (PPS) for the float and body with 316 SS pins/springs as standard wetted materials.
- Model L8: Standard level switch with general purpose enclosure, SPDT snap switch, and 5 A electrical rating.
- Model L8-MV: Incorporates gold plated contacts for dry circuit applications; rated at 1 A @ 125 VAC. The standard PPS body is retained unless combined with other options.
- Model L8-WP: Features a phenylpolioxide weatherproof enclosure housing the electrical wiring. This configuration includes an SPDT gold contact snap switch and carries no UL approval for the enclosure option itself, though CE compliance applies to the series where noted.
- Model L8-WP2: Utilizes an aluminum weatherproof enclosure instead of phenylpolioxide. Like the -WP option, it is not UL approved but provides environmental protection for wiring.
All models require horizontal mounting with the index arrow pointing down and are CE compliant; standard units carry cURus approval (data sheet) or UL 508 recognition (manual). The series is not field serviceable.