검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SGD-DUAL-GRID

듀얼 병렬 그리드, 선형 스트레인 게이지

재고가 있는 모델
  • 굽힘 변형률용 정밀 평행 격자 게이지
  • 5개 팩 단위로 편리한 가격
  • 매우 유연하며 기계적으로 강함
  • 작은 굽힘 반경
SGD-DUAL-GRID
시작 ¥ 18,982
재고가 있는 모델
듀얼 병렬 그리드, 선형 스트레인 게이지 SGD-DUAL-GRID SGD-DUAL-GRID
loading all models
제품 개요
  • 추가 기능 1 굽힘 변형률
  • 작동 온도, 최대 200 °C
  • 최소 작동 온도 -75 °C
  • 팩 크기 5
  • 시리즈 ID SGD-DUAL-GRID
  • 힘들어, 최대 30,000 μm

Supported Applications

The Omega SGD Dual Parallel Grid series consists of precision strain gauges designed for monitoring bending strain. These dual-linear pattern sensors are engineered to measure deformation in applications requiring the detection of flexural stress.

Operating Conditions & Performance

Performance is defined by specific grid patterns and maximum permitted bridge energizing voltages (Vrms) that vary by model configuration. The series supports nominal resistances of 350 Ω and 1000 Ω. Maximum voltage ratings range from 6.5 Vrms to 40 Vrms depending on the gage pattern, resistance value, and termination type selected.

Configuration Options

The series offers a configurable envelope across grid sizes, electrical connections, temperature compensation materials, and physical dimensions.

  • Gage Patterns: Available in multiple configurations identified by pattern codes (e.g., 5.5 mm, 6 mm, 7.4 mm, 11.8 mm actual size representations).
  • Nominal Resistance: Options include 350 Ω and 1000 Ω.
  • Termination Types: Models are offered with Ribbon Leads or Solder Pads for electrical connection.
  • Temperature Compensation Materials: Configurable for Steel (ST) or Aluminum (AL).
  • Packaging: Supplied in packages of 5 units per model number.

Key Product Differences

Variants within the SGD-DUAL-GRID series are distinguished by their gage pattern, nominal resistance, termination method, and temperature compensation material. The model numbering convention follows the format: SGD-<GAGE PATTERN>-<NOMINAL RESISTANCE>-DY<TERMINATION>-<TEMP COMP>. For example, SGD-2/350-DY43 denotes a 350 Ω strain gage with Solder Pads and Aluminum temperature compensation. Physical dimensions for Grid A, Grid B, Carrier C, and Carrier D vary by the specific pattern selected.

액세서리

120 Ω 抵抗ネットワーク
/ 各
0 재고 있음
350 Ω
/ 各
0 재고 있음
低温硬化型ひずみゲージ用接着剤
보낸 사람 ¥3,348
0 재고 있음
ko-KR
ja_JP
설정 저장