検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Series-16G-8G-4G

RS-485 Modbus®搭載デュアルループ温度/プロセスコントローラ(PID制御用)

  • オン/オフ、PID、ファジィロジック、または手動出力制御
  • 定数、傾斜、プログラム(ランプ/ソーク)、またはリモート設定点制御
  • すべてのモデルに2つの一次制御出力、2つの二次/アラームリレー出力、および標準搭載のRS-485
  • オプションのハードウェアでリモート設定点、入力再送信、またはイベント入力機能が利用可能
Series-16G-8G-4G
販売元
RS-485 Modbus®搭載デュアルループ温度/プロセスコントローラ(PID制御用) Series-16G-8G-4G Series-16G-8G-4G
loading all models
製品の概要
  • 精度 ± 1.8°F + スパンの ± 0.3%
  • 精度の詳細 ±1.8°Fおよびスパンの±0.3%(±1°Cおよびスパンの±0.3%) 77°F(25°C)で20分間のウォームアップ後
  • 制御出力 SPSTリレー
  • データインターフェース RS-485 Modbus ASCII/RTU
  • 表示に関する注意事項 プロセス値:4桁、0.47インチ高(12 mm)、オレンジ色LCD;設定値:4桁、0.47インチ高(12 mm)、緑色LCD
  • 表示タイプ LCD
  • エンクロージャーの定格 IP66
  • 入力制御信号 0から20 mA
  • 入力タイプ 熱電対、RTD、直流電圧または直流電流
  • メモリバックアップ 非揮発性
  • 桁数 4
  • 動作温度(最高) 122 °F
  • 動作温度(最低) 32 °F
  • 出力タイプ (B) リレー
  • 消費電力 最大5 VA
  • RTD入力範囲 JPt 100: -4~752 °F; Pt 100: -328~1562 °F; Ni 120: -112~572 °F; Cu 50: -58~302 °F
  • シリーズID Series-16G-8G-4G
  • 最大保管温度 150 °F
  • 保管温度(最低) -42 °F
  • 電源注記 100~240 Vac -20/+8%、50/60 Hz;オプション 24 Vdc、±10%
  • 電源タイプ AC
  • 供給電圧 100から240 Vac
  • スイッチ定格 5 A @ 250 Vac
  • スイッチタイプ SPST
  • 温度センサーの種類 RTDまたは熱電対
  • 熱電対入力範囲に関する注記 タイプK: -328~2372°F;Jタイプ:-148~2192°F;Tタイプ:-328~752°F;Eタイプ:32~1112°F;Wタイプ:-328~2372°F;Rタイプ:32~3092°F;Sタイプ:32~3092°F;Bタイプ:212~3272°F;Lタイプ:-328~1562°F;Uタイプ:-328~932°F;TXKタイプ:-328~1472°F
  • 電圧入力範囲 0から5V、0から10Vまで
  • 重量 9 oz

Supported Applications

The Dwyer Series 16G, 8G, and 4G are dual-loop temperature and process controllers designed for monitoring and control of temperature or general process conditions. These open-type units feature an RS-485 interface with Modbus® ASCII/RTU communication protocol to facilitate bench-top configuration or integration with a PLC or data control system.

Operating Conditions & Performance

The series supports multiple input types including Thermocouple (K, J, T, E, N, R, S, B, L, U, TXK), 3-wire Platinum RTD (Pt100, JPt100), Resistance sensors (Cu50, Ni120), and Analog inputs (0 ~ 5Vdc, 0 ~ 10Vdc, 4 ~ 20mA, 0 ~ 20mA, 0 ~ 50mVdc). Display accuracy is specified as ±1.8°F plus ±0.3% of span (±1°C plus ±0.3% of span) at 77°F (25°C) after a 20-minute warm-up period.

Performance characteristics include a sampling rate of 0.1 sec/per scan for both analog inputs and thermocouple or platinum RTD sensors. The controllers operate within an ambient temperature range of 32 to 122°F (0 to 50°C) with relative humidity between 35% ~ 80% RH (non-condensing). Storage conditions are rated from -42 to 150°F (-20 to 65°C). The front panel carries an IP66 rating, and the units comply with CE and cULus certifications.

Configuration Options

The series is available in three DIN sizes: 1/16 DIN (W48 × H48mm), 1/8 DIN (W48 × H96mm), and 1/4 DIN (W96 × H96mm). Each unit features two independent control outputs configurable for dual-loop operation. Control modes include PID, PID program control (Ramp/Soak), FUZZY, Self-tuning, Manual, and On/OFF.

Output signal options per channel include:

  • Relay Output: SPST, 5 A @ 250 VAC resistive
  • Voltage Pulse Output: 12Vdc (max. 40 mA)
  • DC Current Output: 4 ~ 20mA (Load resistance Max. 500Ω)
  • Linear Voltage Output: 0 ~ 10Vdc

The display consists of a dual-color LCD showing the Process Value in orange and Set Point in green, with selectable resolution of 0 or 1 digit to the right of the decimal point. Power supply options include 80 ~ 260Vac 50/60Hz; 24Vac 50/60Hz ±10%; or 24 Vdc ±10%.

Optional functions available via model configuration codes include Event Input, Retransmission Output, and CT (Current Transformer) input. Electrical connections utilize solder-less terminals with M3 screws (width 5.8 mm).

Key Product Differences

Variants within the Series-16G-8G-4G are distinguished by panel size, output group selections for Output 1 and Output 2, optional function assignments, and power supply type.

  • DIN Size: Models begin with '16' (1/16 DIN), '8' (1/8 DIN), or '4' (1/4 DIN).
  • Output Selections: Output groups are coded as 2 for Voltage Pulse, 3 for Relay, 5 for DC Current, and 6 for Linear Voltage.
  • Function Options: Function codes include '0' (None), '1' or '4' depending on position for Event Input/CT input, and '3' for Retransmission Output. Remote setpoint is available as a function option in specific configurations.

アクセサリー

accessories

R/C snubber (recommended for inductive loads like a solenoid or contactor)
¥5,479 / 各
0 在庫あり
Weatherproof enclosure, type 4X, control direct panel mounts in the front of the enclosure.
¥32,685 / 各
0 在庫あり
防水エンクロージャー、タイプ4X、制御装置をエンクロージャー内に取り付けるためのリアパネル付き透明プラスチック窓。
¥60,629 / 各
0 在庫あり

sensors

J type, 100’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM
¥8,929 / 各
0 在庫あり
K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM
¥16,932 / 各
0 在庫あり

signal conditioners

¥23,065 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する