日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
CDCN91-Controller
デュアルチャネル導電率/抵抗率コントローラ
- 2チャネル入力
- 同時表示
- 交流ライン電圧または直流電源
- 表示および/または制御:µS、mS、PPMまたはPPB(TDS)、kΩ、MΩ、%除去率、差分、比率、 °Cまたは °F
製品の概要
- 精度 ± 2 %
- 追加機能 1 デュアルチャネル;NEMA 4X(IP65)前面および背面、オプションのNEMA 4X(IP65)リアカバーキット付き
- 導電率測定 0.055から400,000 μS/cmまで
- 表示タイプ 2×16桁 英数字LCD
- 表示タイプ 注 英数字 2 x 16 LCD コントラスト:ユーザー選択、5段階 更新速度:1.5秒
- エンクロージャーの定格 IP65, NEMA タイプ 4X
- 周波数 50/60 Hz
- 材料 PBT、ポリカーボネート
- リレーの数 なし
- 運用範囲注記 抵抗率: 10 kΩ/cm から 18.26 MΩ/cm (0.055 から 100 μS/cm); TDS: 0.001 から 999999 ppm または ppb (表示限界)
- 動作温度(最高) 120 °C
- 動作温度(最低) -25 °C
- 出力詳細 現在の出力:(各3)4~20 mA、絶縁、完全調整可能および可逆 最大ループインピーダンス:150 Ω @ 12V、450 Ω @ 18V、750 Ω @ 24V 更新速度:約100 mS 精度:±0.03 mA @ 25°C、24 Vdc オープンコレクター出力:(各2)絶縁、50 mAシンクまたはソース、最大プルアップ電圧30 Vdc 動作設定:Hi、Lo、USP、Pulse、Off ヒステリシス:ユーザー調整可能 遅延時間:0~6400秒 最大パルスレート:400パルス/分
- 消費電力 20 VA
- リレーノート (最大4個まで)SPDTリレー 最大電圧定格:5A @ 30 Vdc または 5A @ 250 Vac 動作設定:Hi、Lo、USP、パルス、オフ ヒステリシス:ユーザー調整可能 タイムディレイ:0~6400秒 最大パルス率:400パルス/分
- 抵抗率測定範囲 10 kΩ/cm~18.26 MΩ/cm
- シリーズID CDCN91-Controller
- 温度精度 ± 0.5°C
- 重量 581 g
Supported Applications
The Omega CDCN-91 Series is a dual-channel conductivity/resistivity controller designed for monitoring and controlling process fluids. The series supports applications requiring precise measurement of conductivity, resistivity, Total Dissolved Solids (TDS), and temperature. It features programmable setpoints with adjustable hysteresis to manage alarm and control functions.
Documented application contexts include:
- Water treatment processes
- General process fluid monitoring and control
- Simultaneous display of two independent channels for comparative analysis (e.g., Percent Reject, Difference, or Ratio)
Operating Conditions & Performance
The CDCN-91 Series operates within specific environmental limits to ensure measurement integrity. The ambient operating temperature range is -10 to 55 °C (14 to 131 °F), with a storage temperature of -15 to 80 °C (5 to 176 °F). Humidity tolerance is rated at 0 to 95%, non-condensing.
Performance specifications for the series include:
- Conductivity Range: 0.055 µS/cm to 400,000 µS/cm (displayed as 0.055 µS/cm to 400.00 mS/cm)
- Resistivity Range: 10 kΩ/cm to 18.26 MΩ/cm
- TDS Range: 0.001 to 99,999 ppm or ppb (display limit)
- Temperature Measurement: -25 to 120 °C (-13 to 248 °F) using PT1000 sensors
- Accuracy: ±2% of reading for Conductivity/Resistivity; ±0.5°C for Temperature (0 to 100 °C); ±0.03 mA @ 25°C, 24 VDC for current outputs
- Update Rate: Approximately 1.5 seconds per update cycle
The enclosure is rated NEMA 4X (IP65) on the front and back when equipped with the optional rear cover kit.
Configuration Options
The CDCN-91 Series offers configurable power, output signaling, and mounting options to accommodate diverse installation requirements. The series supports both AC and DC power configurations via distinct model numbers (CDCN-91 for DC; CDCN-91AC for AC/DC).
Power Supply Options
- CDCN-91: 11 to 24 VDC ±10%, regulated, 0.5 A max
- CDCN-91AC: 100 to 240 VAC ±10%, 50-60 Hz, 20 VA (also supports DC input)
Output Signals & Control
- Analog Outputs: Up to three fully scalable and isolated 4 to 20 mA outputs. Max loop impedance is 150 Ω @ 12 V, 450 Ω @ 18 V, or 750 Ω @ 24 V.
- Digital Outputs: Up to four programmable SPDT relays (5 A @ 250 VAC, 5 A @ 30 VDC).
- Open Collector: Two optically isolated outputs available; 50 mA sink or source with a maximum pull-up voltage of 30 VDC.
Sensor & Connection Options
- Sensors: Compatible with Omega CDCE-90 Series Standard and Certified Conductivity/Resistivity Electrodes (cell constants from 0.01 to 20.0).
- Cabling: Three-conductor shielded cable for sensor extensions up to 30 m (100 ft). Liquid tight connector kits (FPM-5000-LTCK) are available.
Housing & Mounting
- Enclosure: PBT case with polyurethane-coated polycarbonate window and sealed 4-key silicone rubber keypad. Includes optional NEMA 4X (IP65) rear cover kit.
- Mounting: Standard panel mounting; optional heavy-duty wall mount bracket (CDCN-91-WMB) or surface mounting bracket (FPM-5000-MB).
Key Product Differences
The primary distinction within the CDCN-91 Series is the power supply configuration, which defines the model number:
- CDCN-91: Designed for DC power applications (11 to 24 VDC).
- CDCN-91AC: Supports both AC and DC power inputs.
The series utilizes a dual-channel architecture allowing simultaneous monitoring of Channel 1 and Channel 2. Display modes vary based on channel configuration, showing either two conductivity values (C1/C2), one conductivity value with its corresponding temperature, or calculated ratios/differences between channels. The device includes output simulation capabilities for system testing.
PDFとマニュアル