検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

FD-400-Series

ドップラー超音波流量計

  • 6 mmから3 m(1/4インチから120フィート)までのほとんどの配管に対応する非接触型クランプオントランスデューサ
  • 挿入型プローブトランスデューサも利用可能
  • 0.05~9 m/s(0.15~30 ft/s)の広い測定範囲
  • 較正スパンの±2%の精度
FD-400-Series
販売元 ¥ 591,329
ドップラー超音波流量計 FD-400-Series FD-400-Series
loading all models
製品の概要
  • 精度 ± 2 %
  • 精度の詳細 較正スパン全体で±2% FS
  • ケーブル長 6 m
  • 校正オプション NIST
  • 表示に関する注意事項 2行×8文字LCD;LEDバックライト;上段、7セグメント18 mm(0.7インチ);下段、14セグメント9 mm(0.35インチ);8桁レート、8桁トータル(リセット可能)
  • 表示タイプ LCD
  • エンクロージャーの定格 IP66, NEMA タイプ 4X
  • フォームファクター 壁面取り付け
  • キーパッド はい
  • 材料 ポリカーボネート、ステンレス鋼、真鍮、メッキ鋼製取り付けブラケット
  • 測定タイプ ドップラー超音波
  • 桁数 8
  • 動作温度(最高) 85 °C
  • 動作温度(最低) -40 °C
  • パイプサイズ、最大 120 in
  • パイプサイズ、最小 0.3333 in
  • 応答時間 1~60秒
  • シリーズID FD-400-Series
  • 電源注記 115/230 Vac、50/60 Hz ±15% @ 最大5 VA; 12~28 Vdc @ 最大2.5 VA
  • ベロシティ、マックス 9 m/s
  • 速度、最小 0.05 m/s

Supported Applications

The Omega FD-400 Series Doppler Ultrasonic Flow Meter measures liquid flow rate using non-invasive clamp-on transducers or insertion probes. The series is designed for liquids containing suspended solids, gas bubbles, or other sonic reflectors greater than 100 microns at a concentration of 100 ppm. Documented media include water, wastewater, sewage, slurries, and chemicals.

Applications leverage the clamp-on installation method to measure flow on existing pipes without cutting or disrupting service. The system supports synchronization for up to four meters in a single piping system spaced up to 30 m (100') apart.

Operating Conditions & Performance

The FD-400 Series operates with a flow velocity range of 0.05 to 9 mps (0.15 to 30 fps). Accuracy is specified as ±2% FS over the calibrated span, with user-selectable response times from 1 to 60 seconds.

Operating conditions vary by transducer type:

  • Ambient Temperature (Monitor): -40 to 85°C (-40 to 185°F)
  • Process Temperature (Standard Clamp-On & Insertion Probe): -40 to 100°C (-40 to 210°F)
  • Process Temperature (High-Temp Clamp-On): -40 to 200°C (-40 to 400°F)
  • Pressure Rating: Up to 700 psi (48 bar) max for insertion probes; clamp-on ratings depend on pipe integrity.

The monitor enclosure is rated NEMA 4X (IP66). Standard clamp-on transducers are rated NEMA 6P (IP68), while high-temperature clamp-ons are rated NEMA 4 (IP65).

Configuration Options

The series offers a wide range of configuration options for power, output signals, and sensor installation methods.

  • Power Supply: Standard units accept 115/230 Vac (±15%, 5 VA max) or 12 to 28 Vdc (2.5 VA max). Specific power options are selected at order placement via model suffixes.
  • Output Signals: Models provide various combinations of 4-20 mA, rate pulse outputs, and control relays. The 4-20 mA output supports a load resistance up to 800 Ω max with optically isolated circuitry.
  • Relay Outputs: Dual relay configurations are available as form 'C', rated at 200 Vac @ 0.5 A resistive, configurable for rate alarm, totalizer pulse, or error indication.
  • Pulse Output: Rate pulse options include two types: 500 mVac (into 2 kΩ min) or open collector (1 A at 100 V max), with a maximum frequency of 2500 Hz.

Sensor and Installation Options

Transducers are sold separately from the monitor unit. The series supports multiple installation configurations:

  • Clamp-On Transducers: Available in standard sizes for pipes 25 mm to 3 m (1" to 120") and small-pipe sets for 6 to 25 mm (¼" to 1"). High-temperature versions are available for process temperatures up to 200°C.
  • Insertion Probes: Available in lengths from 8" to 48", featuring a NEMA 6 (IP67) rating. Wetted materials include 316 SS, Ultem®, FKM, and nylon.
  • Cable Lengths: Standard cable length is 6 m (20'). Options for 50' or 100' cables are available via model suffixes; armored conduit options require consultation with Engineering.

Display and Configuration

The monitor features a 2-line backlit LCD display showing rate and totalizer values. Units can be configured for various engineering units including feet, gallons, liters, cubic meters, acre-feet, oil barrels (42 gallon), liquor barrels (32.5 gallons), lb, and kg.

Key Product Differences

The FD-400 Series is differentiated by output configuration and power supply options:

  • FD-400: Basic rate and totalizer with no analog or relay outputs.
  • FD-41x Models (e.g., FD-410, FD-411): Include one or two 4-20 mA outputs; some models combine 4-20 mA with pulse or relay outputs.
  • FD-42x Models (e.g., FD-420, FD-422): Feature dual or quad relay configurations for alarm and control applications.
  • FD-43x Models (e.g., FD-430, FD-433): Provide rate pulse outputs in single or double channel configurations.

Power supply variations are indicated by suffixes such as "-230VAC" for 230 Vac units and "-24VDC" for 24 Vdc units. Transducer model numbers distinguish between standard clamp-on (FD-400C), small-pipe clamp-on, high-temp versions (-HT), and insertion probes (FD-400I).

アクセサリー

consumables

Replacement acoustic couplant for sensor mounting, max temperature 65 °C, 150 g tube
¥15,972 / 各
0 在庫あり
Acoustic couplant for sensor mounting, max temperature 65 °C, 6 g pillow pack
¥6,259 / 各
0 在庫あり

sensors

Small-pipe clamp-on transducer set, 6 to 25 mm (1.4 to 1 in)
¥426,176 / 各
0 在庫あり
ja-JP
ja_JP
設定を保存する