検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

PTC-16-A-Timer

DINマウントデジタルタイマー 2リレー出力付き

  • 4桁バックライト付きLCD表示デジタルタイマー
  • 24のプログラム可能なタイミングモード
  • 0~9999秒または0~9999分の時間範囲
  • 24~240V AC/DC電源
PTC-16-A-Timer
販売元 ¥ 31,377
DINマウントデジタルタイマー 2リレー出力付き PTC-16-A-Timer PTC-16-A-Timer
loading all models
製品の概要
  • 精度 ±3 秒/24 時間
  • 定格電流 OP1 8 A 250 Vac/30 Vdc(抵抗)、OP2 8 A 250 Vac/30 Vdc(抵抗)
  • 制御出力 単極切り替え接点および単極N/O接点
  • 電気生命 10万回の作戦
  • エンクロージャーの定格 IP20
  • エンクロージャータイプ DIN 43700準拠のパネルマウント、自己消火性プラスチックケースプラグイン接続端子
  • フォームファクター DINレール
  • 周波数 50/60 Hz
  • 高さ 90 mm
  • 長さ 65 mm
  • リレーの数 2
  • 動作温度(最高) 45 °C
  • 動作温度(最低) -5 °C
  • 消費電力 3 VA
  • リセット 約100 ms
  • シリーズID PTC-16-A-Timer
  • 最大保管温度 55 °C
  • 保管温度(最低) -10 °C
  • 電源タイプ AC
  • 供給電圧 24から240 Vac
  • タイマー範囲 0秒から9999秒、0秒から9999分まで
  • 重量 140 g
  • 幅 36 mm

Supported Applications

The Omega PTC-16-A is a multifunction digital timer designed for controlling equipment, machinery, systems, or processes in industrial applications. It provides timing control via two relay outputs and features a backlit LCD display with front-panel programming keys.

Operating Conditions & Performance

The PTC-16-A operates on a power supply of 24 to 240Vac/dc at 50/60Hz, consuming less than 3VA. It is rated for an ambient operating temperature range of -5°C to +45°C and storage temperatures from -10°C to +55°C. The device carries an IP20 protection class rating and is designed for installation heights up to a maximum of 2000m.

Timing accuracy is specified as ±3sec/24hours across measurement ranges of 0-9999 seconds or 0-9999 minutes. The relay reset time is approximately 100ms, and the device utilizes EEPROM memory with a minimum data retention period of 10 years.

Configuration Options

The series supports DIN rail mounting in a compact housing measuring 36mm wide x 90mm high x 65mm deep (approximately 140g). The enclosure is constructed from self-extinguishing plastics and includes a clear hinged tamperproof cover.

Outputs & Connections

  • R1 Output: Single pole changeover contact, rated at 8A at 240Vac (resistive load).
  • R2 Output: Single pole N/O contact, rated at 8A at 240Vac (resistive load).
  • Contact Life: Mechanical life of 1,000,000 operations; electrical life of 100,000 operations.
  • Electrical Connection: Plug-in connection terminals compatible with 2mm² screw type wiring.

Timing Modes & Display

The timer offers 24 programmable timing modes accessible via front keys (MENU, OK, ▲, ▼). The display indicates start mode (On/Off/S pulse), output relay status, selected relay (R1/R2), run time value, setpoint time value, and the active timing function. Indicators distinguish between seconds (sec) or minutes (min).

Approvals & Compliance

The device is CE marked and RoHS compliant. Specific directives include EN 60947-5-1:2004+A1:2009, EN 60730-1:2012, EN 60730-2-7:2011+AC:2012, EN 61000-6-2:2005, EN 61000-6-4:2007+A1:2011, EN 61000-3-2:2014, and EN 61000-3-3:2013. Additional compliance includes EN61010-1:2010 (low voltage) and EN61326-1:2013 (EMC directives).

Key Product Differences

The PTC-16-A is a single-model series. The output contacts are fully isolated from the supply voltage. Per manufacturer warnings, this timer is not intended for medical or life-support systems and should not be used in locations where corrosive or flammable gases could be present.

ja-JP
ja_JP
設定を保存する