한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-LCT216
밝은 디스플레이가 있는 디지털 타이머, 타코미터 및 카운터, 14가지 기능
デジタルタイマー、タコメーター&カウンター 明るいディスプレイ付き、14機能- 14가지 사전 프로그래밍된 타이머 기능
- 단계 1단계, 2단계, 배치, 총계, 이중 계수 모드
제품 개요
- 응용 분야 산업 및 제조업, 프로세스 자동화 및 제어
- 디스플레이 노트 2줄 6자리 네거티브 투과형 LCD 표시
- 디스플레이 유형 6자리 LCD
- 기능 14개 사전 프로그래밍됨
- 습도 범위 35% ~ 85% RH 비응축
- 입력 제어 신호 건식 접촉, PNP, 또는 NPN
- 작동 온도, 최대 122 °F
- 최소 작동 온도 32 °F
- 전력 소비 < 10 VA
- 리셋 0.001초 최소
- 시리즈 ID Series-LCT216
- 공급 전력 참고 100~240 Vac 50 / 60 Hz; 내부 전원 공급 장치: 12 Vdc ±10%, 100 mA
- 전원 유형 에어컨
- 공급 전압 100 ~ 240 Vac
- 무게 4 oz
Supported Applications
The Series LCT216 Digital Timer, Tachometer & Counter by Dwyer is a multi-function instrument designed for mounting in an enclosed panel. It operates as a timer, counter, or tachometer within process control applications requiring versatile timing and counting functions.
- Timer
- Tachometer
- Counter
Operating Conditions & Performance
The Series LCT216 operates under ambient temperatures of 32 to 122°F (0 to 50°C) and humidity conditions of 35 to 85% RH (non-condensing). The device features a two-line 6 digit negative transmissive LCD display that shows the set point, current process value, and operating mode. Performance specifications include a reset time of 0.001 s maximum.
- Supply Voltage: 100 to 240 VAC 50 / 60 Hz
- Power Consumption: Less than 10 VA
- Internal Power Supply: 12 VDC ±10%, 100 mA
Measurement Ranges and Resolution
The instrument supports the following measurement ranges:
- Counter: 0 to 99999999 with a resolution of 1
- Timer: 0 to 9999.99 with a resolution of 0.01
- Tachometer: 0 to 999999 with a resolution of 1
Configuration Options
The Series LCT216 is configurable for different input types and output signals, accommodating specific control requirements. The unit supports Dry contact, PNP, or NPN inputs.
Output Types
- LCT216-100: Transistor (NPN open collector 100 mA / 30 VDC residual voltage = 1.5 VDC max)
- LCT216-110: Relay (SPST 5 A at 250 VAC)
Both output types are available for Out 1 and Out 2 configurations.
Housing and Mounting
The device features a plastic housing with overall dimensions of approximately 48.0 mm (1.89 in) x 48.0 mm (1.89 in) x 85.22 mm depth, weighing 4 oz (114 g). It is designed for panel mounting using screws tightened to a torque of 0.8 kgf-cm.
Configuration
- External DIP switches located on the side of the unit allow programming parameters without front-panel key entry.
- The device offers 14 pre-programmed timing functions.
Key Product Differences
Variants within the Series LCT216 differ primarily by output type. The model number guide follows the format LCT216 - <Output Type>. Model LCT216-100 provides a transistor output, while model LCT216-110 provides a relay output.
- Compliance: CE, cULus