日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
Series-DFC
ガス測定用チューブセンサー付きデジタル流量コントローラー – NISTトレーサブル
- 20 ms未満の高速応答率により変化を迅速に確認可能
- 設定・校正ソフトウェアを使用した簡単なセットアップ
- 最大90種類のユーザー選択可能なガスおよびガス混合物に対応し、多様な用途で使用可能
- 高精度かつ高い再現性で用途要件を満たす
- ステータスLEDまたはOLED表示による自己診断でダウンタイムを最小化
製品の概要
- 精度 ± 0.5 % of reading, + 0.2 % FS
- 応用例 流体計測と制御, ポンプ制御
- データインターフェース RS232、RS485
- 表示に関する注意事項 2 x 16文字 OLED(モデル選択可能)
- 表示タイプ LED
- 真空下でのリーク率 10⁻⁹ cc He/s未満
- 材料 フルオロエラストマー
- 材料、湿潤 316ステンレス鋼, 416ステンレス鋼, アルミナセラミック, エポキシ, FKM, ガラス, Gold, シリコー, スチール
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, 不活性/非反応性ガス
- 動作温度(最高) 140 °F
- 動作温度(最低) 14 °F
- 出力詳細 0-5 Vdc 標準(4-20 mA、0-10 Vdc 表示選択可能)
- 出力信号 電流、電圧
- 粒子サイズ、最大 20ミクロン
- 圧力限界 最大120 psiまで
- 圧力タイプ ゲージ
- プロセス接続タイプ クランプ継手
- リレーレーティング プログラム可能ソリッドステートリレー
- 繰り返し精度 ±0.2%
- 応答時間 150 ms
- シリーズID Series-DFC
- 電源タイプ DC
- 供給電圧 12から26Vdc
- 体積流量、最小 0 ml/min
Supported Applications
The Dwyer Series DFC Digital Flow Controller is designed for the measurement and control of mass flow rates in gases. The series combines a straight tube sensor with a restrictor flow element to provide accurate readings across various industrial and scientific contexts.
Documented applications include:
- Operating pumps and valves
- Process equipment monitoring
- Vacuum processes
- Scientific and analytical applications
- Bioreactors and surface depositions
The device is not designed for use in life support applications where any malfunction may cause personal injury.
Operating Conditions & Performance
The Series DFC operates within a process temperature range of 14 to 140°F (-10 to 60°C). It supports clean, non-corrosive gases compatible with the specified wetted parts. The maximum particulate size allowed is 20 microns.
Performance specifications include:
- Accuracy: ±(0.5% of reading + 0.2% FS)
- Repeatability: ±0.2% FS
- Response Time: 150 ms
- Pressure Limits: 120 psig (8.27 bar)
- Leak Integrity: 1 x 10⁻⁹ sccs of helium
The series supports measurement ranges from 0 to 100 mL/min up to 0 to 100 L/min, with specific configurations available for very low flow (e.g., 0.5 mL/min to 50 mL/min) and high flow applications.
Power Supply
The standard power supply requirement is 12-26 VDC. Specific models in the DFC-54 through DFC-56 range require 24-26 VDC. Optional external power supplies are available, including a GFM-110P (110 V) and GFM-220PE (220 V).
Wetted Materials
The wetted materials include 316 SS, 416 SS, high temperature polyamide, alumina ceramic, epoxy, silicone, glass, gold, and FKM O-rings.
Configuration Options
The Series DFC offers configurable options for process connections, output signals, digital interfaces, and display types to meet specific installation needs. The model number guide follows the format: DFC - <PRESSURE RANGE> - <BODY SIZE> - <SEAL MATERIAL> - <FITTINGS> - <DISPLAY> - <OUTPUT SIGNAL> - <DIGITAL INTERFACE>.
Process Connections
Fittings are selected based on flow rate:
- -A (1/8" compression): For very low and low flow rates.
- -B (1/4" compression): For medium flow rates up to 50 L/min (-050).
- -D (3/8" compression): For high flow rates up to 100 L/min (-100).
The series also supports threaded connections such as 10-32 UNF and 1/4-18 NPT depending on the body size.
Output Signals & Digital Interface
Analog output options include:
- A (Default): 0-5 VDC
- Selectable via display: 4-20 mA or 0-10 VDC
Digital communication is supported via an RS-232 interface (default) with a selectable RS-485 option. The device includes a DIN connector for electrical connections and status LEDs.
Display & Controls
The standard display features 2 x 16 character OLED screens showing mass flow, volumetric flow, pressure, and temperature parameters. Optional configurations may include an OLED screen with joystick or Esc button controls.
Key Product Differences
Variants within the Series DFC differ primarily by measurement range (body size), process connection type, and output configuration. The series encompasses models ranging from very low flow applications (e.g., 0.5 mL/min to 50 mL/min) to high flow rates up to 100 L/min.
Physical dimensions vary by model family:
- DFC-01/50 range: Dimensions A: 3-21/32 [92.96] or 3-11/16 [93.47]; B: 4-13/32 [111.76] or 4-37/64 [116.33].
- DFC-51/56 range: Dimensions A: 5-7/16 [137.92]; B: 4-27/32 [123.19].
Weights are listed as 1.40 lbs (0.635 kg) for DFC-01/50 models and 1.66 lbs (0.755 kg) for DFC-51/56 models.
DFC-0102030405060708091011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556-005010050100-V-ABD-NL-A-23
レンジ
ja-JP
ja_JP
設定を保存する