日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
CY670
低温シリコンダイオード温度センサー
극저온 실리콘 다이오드 온도 센서- 가장 넓은 유용 온도 범위에서 최고의 정확도, 1.4~500 K
- 30~500 K 범위의 애플리케이션에 대한 가장 엄격한 허용 오차
- 견고하고 신뢰할 수 있는 SD 패키지(반복적인 열 사이클을 견디고 센서 자체 가열 최소화 설계)
- 표준 곡선 CY670 준수(다양한 패키지 옵션의 온도 응답 곡선)
製品の概要
- 현재, 맥스 사양 참고 1 mA, 연속 또는 100 mA, 펄스
- 출력 신호 전압
- 공정 온도, 최대 226.85 °C
- 최소 공정 온도 -271.8 °C
- 권장 흥분 10 μA, ± 0.1 %
- 반복성 ± 10 mK @ 4.2 K
- 역전압 60 V
- 시리즈 ID CY670
- 전원 효과 16 µW @ 4.2 K; 10 µW @ 77 K; 5 µW @ 300 K
- 온도 센서 유형 실리콘 다이오드
- 열 반응 시간 SD 모델: 일반적으로 <10 ms @ 4.2 K, 100 ms @ 77 K, 200 ms @ 305 K; BR 모델: 1 ms @ 4.2 K, 13 ms @ 77 K, 20 ms @ 305 K
- 자기장 사양 참고 ~ 의 사용 60 K 이하의 자기장 응용에는 권장되지 않음; 60 K 이상에서 5 테슬라까지의 자기장에서는 자기장 의존도가 낮음
- 방사선 사양 참고 ~ 의 사용 저준위 방사선에서만 사용 권장
- 진동 저항 표준 CY670 곡선에 따른 출력으로, 30~500K(-243~227°C) 사이의 온도 측정에 사용됩니다. 사용 가능한 정확도는 하십시오. (주요 기술 사양 기준)
Supported Applications
The Omega CY670 Series consists of silicon diode temperature sensors designed for cryogenic and low-temperature applications. These sensors are intended for use with compatible instrumentation systems to measure temperatures across a broad range from deep cryogenics up to room temperature and beyond.
- Cryogenic measurement
- Low-temperature sensing
Operating Conditions & Performance
The CY670 Series operates over a process temperature range of 1.4 to 500 K, with specific adapter configurations supporting ranges up to 325 K or 475 K depending on the model. The sensors conform to standard curve CY670 and require an external current source for operation.
- Recommended Excitation: 10 µA, ±0.1%
- Max Reverse Voltage: 60V
- Dissipation at Recommended Excitation: 16 µW @ 4.2 K; 10 µW @ 77 K; 5 µW @ 300 K
Sensitivity varies with temperature, ranging from approximately -12.5 mV/K at 1.4 K to -2.30 mV/K at 305 K. Response times for the SD model are typically <10 ms @ 4.2 K, 100 ms @ 77 K, and 200 ms @ 305 K.
Configuration Options
The series offers multiple mounting configurations to accommodate different installation requirements, including screw-in adapters, clamp styles, copper bobbins, and bare chip options. Wetted materials include silicon, beryllium oxide, copper, and phosphor-bronze wire.
Mounting Adapters
- CY670-SD: Basic sensor package style (flat)
- CY670-CO: Spring-loaded brass clamp for removable mounting
- CY670-LR: Cylindrical copper adapter
- CY670-MT: Metric-threaded copper adapter
- CY670-ET: SAE-threaded copper adapter (screw-in)
- CY670-CU/DI/CY: Copper disk or bobbin configurations with thermal anchoring via epoxy
- CY670-BO: Bolt-on copper block with beryllium oxide thermal link
Accuracy Tolerance Bands
The series is available in five tolerance bands (A, B, C, D, E) to meet varying precision requirements across the temperature range:
- Band A: ±0.25 K (2 to 100 K), ±0.50 K (100 to 305 K)
- Band B: ±0.50 K (2 to 305 K), ±0.33% of T (305 to 500 K)
- Band C: ±1.0 K (2 to 305 K), ±0.5% of T (305 to 500 K)
- Band D (PRT Band): ±1.5 K (2 to 30 K), ±0.25 K (30 to 100 K), ±0.30 K (100 to 305 K), ±0.1% of T (305 to 500 K)
- Band E (Bare Chip Band): ±1.0 K (2 to 30 K), ±0.25 K (30 to 100 K), percentage-based tolerances above 100 K
Key Product Differences
Differences within the CY670 Series are defined by the physical package style and the selected accuracy tolerance band.
- The SD (flat sensor) and CO (clamp style) adapters support a temperature range of 1.4 to 500 K or up to 475 K depending on configuration, while most other copper-based adapters are rated for 1.4 to 325 K.
- Band E is designated as the "Bare Chip Band" and includes options such as CYC670E-BR-10 (package of 10).
- The CU, DI, and CY mounting adapters serve as their own sample thermal anchor; the PI and CY adapter can be used only in a two-wire configuration.
Caution notes indicate that use is recommended for low-level radiation environments. The sensors are not recommended for magnetic field applications below 60 K due to high dependence, though they exhibit low magnetic field dependence up to 5 tesla above 60 K.