検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

CDCN-961-Controller

導電率、抵抗率、またはTDSコントローラー

  • プロセス溶液および水用途における導電率、抵抗率、TDSを監視。
  • メニュードリブンプログラミング
  • NEMA 4X(IP65)保護
  • プログラム可能な高/低およびアラームリレー
CDCN-961-Controller
販売元 ¥ 342,191
導電率、抵抗率、またはTDSコントローラー CDCN-961-Controller CDCN-961-Controller
loading all models
製品の概要
  • 精度 ± 1 %
  • ケーブル長 5 m
  • 校正に関する注記 ライン抵抗補償:0.0~20.0 Ω
  • セル定数 K = 0.01、0.1、1、10、導電率電極:K=1.0
  • 導電率測定 0.000から3.000、30.00、300.0 μS/cm
  • カットアウト寸法 93.5 × 93.5 mm
  • データインターフェース RS485
  • 直径 136 mm
  • 表示タイプ LCD
  • EMC規格 IEC 61000-6-1, IEC 61000-6-2
  • エンクロージャーの定格 IP65, NEMA タイプ 4X
  • 周波数 1~999時間 1~999秒(洗浄時間の頻度)
  • 高さ 108 mm
  • インピーダンス 600 Ω
  • 材料 グラファイト
  • 測定範囲注記 導電率:0.000~3.000、30.00、300.0 μS/cm 抵抗率:0.3~30.0 MΩcm TDS:0.000~3.000、30.00、300.0 ppm 測定範囲:0~50.0 mS/cm
  • リレーの数 3
  • 動作湿度 10~95% RH
  • 動作温度(最高) 50 °C
  • 動作温度(最低) -10 °C
  • 出力詳細 4~20 mA/600 Ω
  • プロセス温度(最高) -0.5 °C
  • プロセス温度(最低) 130 °C
  • リレーノート 3 SPST/250V 1A、制御ヒステリシスバンド:0.1~10% FS
  • 抵抗率測定範囲 0.3から30.0 MΩcm
  • 抵抗値の分解能 0.001/0.01/0.1 μS/cm
  • シリーズID CDCN-961-Controller
  • 温度精度 ± 0.5°C
  • 温度分解能 0.1°C
  • 温度センサーの種類 1000 Ω RTD
  • 重量 1650 g
  • 幅 100 mm

Supported Applications

The Omega CDCN-961 is a Conductivity Controller / Transmitter designed for separate conductivity and temperature measurement. It features a digital display, multiple setpoints, and configurable output signals intended for industrial process control applications.

Operating Conditions & Performance

The series supports a measurement range from 0.00 to 2000000000.0 μS/cm with a resolution of 0.01 μS/cm. Accuracy is specified as ±0.5% of reading ±0.5% of full scale, and repeatability is ±0.1% of full scale. The response time is listed at 0.5 s.

Operating conditions include an ambient temperature range of 0 to 50 °C and a process temperature range of -5 to 120 °C. Storage temperatures are rated from -20 to 70 °C. Humidity tolerance is 0 to 95% RH (non-condensing). The unit carries an IP65 enclosure rating, with ABS plastic housing material.

Key Performance Parameters

  • Measurement Range: 0.00 to 2000000000.0 μS/cm (configurable via P08)
  • Accuracy: ±0.5% of reading ±0.5% of full scale
  • Hysteresis: 0.1% of full scale
  • Pressure Rating: 0 to 10 bar (process)
  • Load Resistance: 0-600 Ω for analog outputs

Configuration Options

The CDCN-961 offers configurable output signals and setpoint management. The device supports the following electrical connections and signal types via terminal block connection.

Output Signals & Control Options

  • Analog Outputs: 4-20 mA, 0-20 mA, or 0-10 V (configurable in P03)
  • Relay Outputs: Relay 1 (SPDT), Relay 2 (SPDT), and Alarm Relay 3 (SPDT)

Housing & Installation

  • Dimensions: 96 mm x 96 mm x 110 mm
  • Enclosure Rating: IP65
  • Power Supply: 100-240 VAC, 50/60 Hz or 24 VDC
  • Electrical Connection: Terminal block

Configuration Parameters

The controller includes internal parameters for setup and calibration. Factory preliminary values include a temperature set-up (P01) of 25.0 °C, an offset set-up (P02) of 0.00 μS/cm, and control mode (P04) set to Auto.

Key Product Differences

The CDCN-961 series is identified by the model number guide "CDCN-961 - <Model Number>". The primary variation within this family involves the selection of measurement ranges and output configurations via internal parameter settings (P03, P05-P07). All units share the same physical dimensions, enclosure rating, and power supply options.

Approvals include CE certification. No specific wetted materials or sheath specifications are provided for this controller unit in the source documentation; these depend on the external probe selected by the user.

ja-JP
ja_JP
設定を保存する