検索へジャンプ メインコンテンツへジャンプ ナビゲーションへジャンプ

日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください

におられるようです。地域限定のオファーやサポートをご希望の場合は、下のリンクをクリックして、お住まいの地域のサイトにアクセスしてください。

Model-MM-2

コンパクトTrue RMSデジタルマルチメーター - 1000V DC、750V AC、10A、400Ω

Model-MM-2
販売元 ¥ 41,987
コンパクトTrue RMSデジタルマルチメーター - 1000V DC、750V AC、10A、400Ω Model-MM-2 Model-MM-2
loading all models
製品の概要
  • AC電流範囲 0.1 µA ~ 10 A
  • 交流電圧範囲 0.1 mV ~ 750 V
  • バッテリーのサイズと種類 アルカリ9V
  • 静電容量の選択 4n、40n、400n、4µ、40µ、400µ、4m、40mF
  • 連続性テスト 可聴ブザー
  • DC電流範囲 0.1 µA ~ 10 A
  • DC 電圧範囲 0.1 mV ~ 1000 V
  • 表示に関する注意事項 バーグラフ付きバックライト。4000カウント+小数点付き
  • 表示タイプ 4桁LCD
  • 周波数 1 Hz~40 MHz
  • 動作温度(最高) 1382 °F
  • 動作温度(最低) -40 °F
  • 保護 1000 Vrms
  • 抵抗選択 400 Ω、4 kΩ、40 kΩ、400 kΩ、4 MΩ、40 MΩ
  • サンプリングレート 2.5 Hz (2.5 回/秒)
  • シリーズID Model-MM-2
  • 電源注記 9 V アルカリ電池、付属、ユーザー交換可能
  • 電源タイプ バッテリー
  • 重量 23.5 oz

Supported Applications

The Dwyer Model MM-2 is a compact True RMS digital multimeter designed for general electrical testing and troubleshooting. It performs DC and AC TRMS voltage, DC and AC TRMS current, resistance, continuity, frequency, capacitance, diode test, LED test, transistor hFE, and temperature measurements.

The instrument supports Measurement Category IV (CAT IV) 600 V for low-voltage installation sources such as electricity meters and over-current protection devices. It also meets CAT III 1000 V requirements for building installations including distribution boards, circuit breakers, and wiring. The meter is suitable for circuits directly connected to a low-voltage installation (CAT II) and specially protected internal MAINS-derived circuits not directly connected to mains (CAT I).

Operating Conditions & Performance

The Model MM-2 features an autoranging 4000 count plus decimal point backlit LCD display with a bar graph. The sampling rate is specified as 2.5 x per s.

  • Voltage: DC Voltage ranges from 0.1 mV to 1000 V (accuracy: 0.5% + 2 digit); AC Voltage ranges from 0.1 mV to 750 V (accuracy: 1.3% + 5 digit).
  • Current: DC Current and AC Current range from 0.1 uA to 10 A with accuracies of 1.0% + 3 digit for DC and 1.5% + 5 digit for AC.
  • Resistance & Capacitance: Resistance ranges include 400, 4K, 40K, 400K, 4M, and 40M Ω (accuracy: ±(1.0% + 2 digit)). Capacitance covers 4n to 40mF steps with an accuracy of ±(1% + 5 digit).
  • Frequency & Temperature: Frequency measurement spans 1 Hz to 40 MHz. The included thermistor supports temperature measurements from -40 to 1382°F (-40 to 800°C).

The unit is powered by a user-replaceable 9 V alkaline battery (included). It features overload protection rated at 1000 Vrms and includes an audible buzzer for continuity testing.

Configuration Options

The Model MM-2 series utilizes a rugged, high impact case that is double injected. The rotary selector switch provides access to DCV, ACV, Ω/Continuity (→), Capacitance (||), Hz, μADC, μAAC, DCA, and ACA positions.

  • Display & Controls: 4-digit backlit LCD with HOLD, PK/REL, MX/MN, R/SEL, Backlight, and OFF functions. The display indicates value, mode, and low battery status.
  • Terminals: Test leads connect to COM, A, and VΩ-μA terminals.
  • Included Accessories: Black and red test leads, 9V battery, thermistor with input adapter, and a carrying case with belt loop.

The instrument is designed for pollution degree 2 environments. Safety warnings indicate the meter should not be used in humid or wet places, rooms with explosive gas, combustible gas, steam, or excessive dust. It is noted as not suitable for non-sine wave voltage and current measurements.

Key Product Differences

The series consists of a single model configuration: Model MM-2 (SKU: MM-2). The datasheet does not list alternative housing styles, output signal types, or sensor element variations beyond the standard thermistor input adapter provided with the unit.

ja-JP
ja_JP
設定を保存する