日本 +81 3 6822 0370 | 新しいウェブサイトへようこそ。問題やバグを見つけましたか?こちらからご報告ください
PX165
コンパクト、差圧、低圧トランスデューサー
- 超低差圧範囲 - 最小0.25 inH2O
- コンパクトでPCB取り付け可能
- 耐久性のあるPBTケース
- オプションのコネクタによる迅速かつ簡単な電気接続、アクセサリ参照
PX165
販売元
¥
64,586
製品の概要
- 精度 ± 1 %
- 精度クラス > 0.25%
- 追加機能 2 PCB取り付け可能
- 電気接続 JST BHコネクタ
- 電気出力に関する注意事項 5 Vdc電源電圧で駆動時、0.5~4.5 Vdcの比率出力。
- 対応媒体 クリーンな乾燥空気 / 不活性ガス, 燃料ガス, 不活性/非反応性ガス
- 動作温度(最高) 60 °C
- 動作温度(最低) -20 °C
- 出力信号 ミリボルト
- プロセス接続サイズ 3/32インチ
- プロセス接続タイプ ステム
- シリーズID PX165
- 供給電圧 4.5から5.5 Vdc
Supported Applications
The Omega PX165 series consists of compact, differential pressure transducers designed for measuring low differential pressure in non-corrosive dry gases only. The device utilizes a micro-machined silicon capacitive sensor paired with an application-specific integrated circuit (ASIC) to provide calibration and temperature compensation.
Operating Conditions & Performance
The PX165 series is factory-calibrated in the vertical position; mounting the unit horizontally can cause a zero shift of up to 1% of F.S. The transducer requires a regulated power supply between 4.5 and 5.5 VDC. When powered with a 5VDC supply voltage, it delivers a ratiometric output signal ranging from 0.5 to 4.5 VDC.
Specific performance metrics such as accuracy class, repeatability, hysteresis, response time, and burst pressure are not specified in the available documentation for this series. The rated overpressure capability is noted but no specific value is provided.
Configuration Options
The PX165 series offers multiple measurement ranges indicated by model suffixes (e.g., 0.10, 0.25, 0.50, 0.75, 001, 002, 005, 010, 015, 020). The series supports the following configuration options:
- Process Connection: Barbed connection accepting 1/8" O.D. and 1/16" I.D. tubing.
- Electrical Connector: JST SM03(4.0)B-BHS-1-TB transducer connector with a mating JST BHR-03VS-1 connector.
- Cabling Options: Optional wiring harness featuring 15.75" 24 AWG leads and the mating JST BHR-03VS-1 connector.
- Wiring Configuration: Three-wire system with White (OUT), Black (COM), and Red (V+) conductors.
The transducer dimensions are 1.18 in (30 mm) length, 1.02 in (26 mm) width, and 0.37 in (9 mm) height. The overall height including the connector is 1.50 to 1.65 inches.
Key Product Differences
Variants within the PX165 series are distinguished by their specific differential pressure ranges, denoted in model numbers such as PX165-0.10B or PX165-020U. The documentation does not specify distinct differences between 'B' and 'U' suffixes regarding performance or construction beyond the part number designation.
Important operational constraints include warnings against use in human applications, exposure to excessive overpressure, vibration, pressure pulsation, instrument temperature extremes, corrosion of pressure-containing parts, or static electrical charges. The warranty is void if evidence shows tampering, excessive corrosion, current/heat/moisture/vibration damage, improper specification, misapplication, misuse, or operating conditions outside Omega's control.