한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
Series-CDTR
CO2, 습도 및 온도 트랜스미터를 위한 효율적인 빌딩 관리 시스템
- 디지털 인텔리전스 온도 보상 알고리즘(DITCA¢)은 벽걸이형 결합 장치의 자체 가열 효과로 인한 오류를 제거합니다
- 단일 빔 이중 파장 NDIR CO2 센서
- 교체 가능한 습도/온도 센서
- 물리적 하드웨어 잠금 장치
- LCD가 없는 덕트 마운트 및 벽걸이형 유닛용 서비스 디스플레이 도구 제공
- 릴레이 출력 옵션
제품 개요
- 응용 분야 건축 및 유지 관리, HVAC
- 이산화탄소 농도, 최대 2000 ppm
- 이산화탄소 농도, 최소 0 ppm
- 이산화탄소 반응 시간 120초 (τ90)
- 전기 출력 4 ~ 20 mA
- 작동 온도, 최대 122 °F
- 최소 작동 온도 32 °F
- 출력 세부 정보 CO2 출력: 4~20 mA / 0~(5 또는 10) Vdc; RH 출력: 4~20 mA / 0~(5 또는 10) Vdc
- 출력 신호 전류, 전압
- 전력 소비 평균: 2승; 최고도: 3.75W
- 상대 습도 0~85% RH 비응축
- 상대습도 정확도 ± 2 % RH
- 상대 습도 입력 범위 10 ~ 90% RH
- 센서 수명 15년
- 시리즈 ID Series-CDTR
- 전원 유형 AC / DC
- 공급 전압 19 ~ 28 V/16 ~ 35 Vdc
- 스위치 유형 해당 없음
- 전압 출력 범위 0 ~ 5 Vdc, 0 ~ 10 Vdc
Supported Applications
The Dwyer Series CDTR Carbon Dioxide, Relative Humidity & Temperature Transmitters are designed to accurately monitor CO2 concentration and temperature in indoor environments. Documented applications include schools, office buildings, hospitals, and other facilities requiring demand control ventilation or energy savings support for LEED® certification.
The series supports specific regulatory compliance needs:
- Schools (K-12): DSA-compliant option (-S) available with a front-facing LED that illuminates when CO2 exceeds 1100 PPM, addressing requirements under Public Utilities Code 1625 (Assembly Bill 841).
- Ventilation Control: Optional relay output allows control of exhaust fans, windows, dampers, or signaling lights/horns based on user-adjustable set points.
Operating Conditions & Performance
The Series CDTR utilizes a single-beam dual-wavelength non-dispersive infrared (NDIR) sensor with an expected life of 15 years. The transmitters feature digital barometric pressure adjustment to maintain accuracy at various elevations and include Automated CO2 Baseline Correction (ABC) for maintenance-free operation in intermittently occupied spaces.
Measurement Ranges:
- CO2: 0 to 2000 PPM or 0 to 5000 PPM (depending on model).
- Temperature: 32 to 122°F (0 to 50°C).
- Relative Humidity: 0 to 85% RH or 0 to 100% RH (non-condensing, for units configured with humidity output).
Accuracy Specifications:
- CO2: ±40 PPM + 3% of reading at 2000 PPM; ±50 PPM + 5% of reading at 5000 PPM. (Note: Specified CO2 accuracy is guaranteed after three weeks of continuous operation in intermittently occupied environments).
- Temperature: ±1°C @ 25°C.
- RH: ±2% for units configured with humidity output (measured at 10 to 90% RH or 0 to 85% RH depending on source).
The response time is documented as 2 minutes for a 90% step change. A warm-up period of 30 minutes is required upon powering the transmitter.
Configuration Options
The series offers configurable mounting styles, output signals, and display options to accommodate diverse installation requirements while maintaining consistent sensor performance.
- Housing & Mounting: Available in North American style wall mount or duct mount configurations. Duct mount probes feature a diameter of 1-15/64" [31.35] and an overall length of 11-49/64" [298.85]. Wall mount units measure approximately 4-1/2" height x 2-51/64" width.
- Power Supply: Universal input supporting 16-35 VDC or 19-28 VAC.
- Output Signals (Selectable via DIP Switches):
- Current: 4-20 mA (max. load resistance 500 Ω).
- Voltage: 0-5 VDC or 0-10 VDC (min. load resistance 500 Ω). Other ranges include 0-20 mA, 2-10 mA, 0-5 mA, and various voltage spans.
- Relay: SPST NO rated 2A @ 30 VDC with user-adjustable set points (RON/ROF).
- Sensor Output: RTD or thermistor per r-t curves on page 4 of the manual (depending on model).
- Display Options: Integral LCD display available; remote indication supported via Model A-449. Remote calibration and validation are supported via Model A-449A.
- Compliance & Approvals: CE marked. DSA-compliant option (-S) for school environments.
Key Product Differences
The Series CDTR encompasses both wall mount and duct mount form factors, distinguished by their physical dimensions and installation method (wall plate vs. cut hole into duct). The series title indicates the inclusion of Relative Humidity measurement in the "CDTR" designation.
- Wall Mount: Designed for indoor room monitoring with a compact housing profile suitable for standard wall installations.
- Duct Mount: Features an extended probe design (overall length 11-49/64") intended for insertion into HVAC ductwork to monitor air quality within the distribution system.
Variants differ by CO2 range selection (0–2000 PPM vs. 0–5000 PPM) and output configuration, which is set via internal DIP switches for current or voltage ranges. The DSA-compliant option (-S) adds a front-facing LED indicator specific to school monitoring requirements.
PDF 및 매뉴얼
CDTR - Datasheet
CDTR
Series CDTR Catalog Page
CDT - AQ-CDT Duct Mount Manual (Pre April 2022)
CDT - AQ-CDT Duct Mount Manual (Post April 2022)
CDT - AQ-CDT-N Wall Mount Manual (Pre April 2022)
CDT - AQ-CDT-N Wall Mount Manual (Post April 2022)
AQ-CDTR-N Wall Mount Manual (Post April 2022)
View More
View Less
CDT - AQ-CDT Duct Mount Manual (Pre April 2022) - AQ_CDT_CDTR_2_pdf 사용자 매뉴얼
CDT - AQ-CDT Duct Mount Manual (Post April 2022) - AQ_CDT_CDTR_3_pdf 사용자 매뉴얼
CDT - AQ-CDT-N Wall Mount Manual (Pre April 2022) - AQ_CDT_CDTR_E_N_2_pdf 사용자 매뉴얼
CDT - AQ-CDT-N Wall Mount Manual (Post April 2022) - AQ_CDT_CDTR_E_N_3_1_pdf 사용자 매뉴얼
AQ-CDTR-N Wall Mount Manual (Post April 2022) - dwyer_cdt_series_manual_aq_cdt_cdtr_e_n_3_en_us_pdf_pdf 사용자 매뉴얼




